Hi Florian,
Am 11.10.19 um 21:31 schrieb Florian Fainelli:
> On 10/11/19 11:48 AM, matthias.bgg@xxxxxxxxxx wrote:
>> From: Matthias Brugger <mbrugger@xxxxxxxx>
>>
>> Enable Gigabit Ethernet support on the Raspberry Pi 4
>> Model B.
>>
>> Signed-off-by: Matthias Brugger <mbrugger@xxxxxxxx>
>>
>> ---
>>
>> arch/arm/boot/dts/bcm2711-rpi-4-b.dts | 22 ++++++++++++++++++++++
>> arch/arm/boot/dts/bcm2711.dtsi | 18 ++++++++++++++++++
>> 2 files changed, 40 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
>> index cccc1ccd19be..958553d62670 100644
>> --- a/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
>> +++ b/arch/arm/boot/dts/bcm2711-rpi-4-b.dts
>> @@ -97,6 +97,28 @@
>> status = "okay";
>> };
>>
>> +&genet {
>> + phy-handle = <&phy1>;
>> + phy-mode = "rgmii";
> Can you check that things still work against David Miller's net-next?
> Tree, in particular the BCM54213PE PHY might be matched by the BCM54210E
> entry in drivers/net/phy/broadcom.c and I just fixed an issue in how
> RGMII delays were configured:
>
> https://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next.git/commit/?id=fea7fda7f50a6059220f83251e70709e45cc8040
>
> This might require you to change the 'phy-mode' property to what is
> appropriate.
since i didn't get a reply from the Pi folks yet, i tried all the other
rgmii variants on top of this branch [1].
But none of them worked.
In case of "rgmii-id" i'm getting:
unknown phy mode: 9
and for "rgmii-rxid":
unknown phy mode: 10
In those cases the PHY didn't even probe. Did i missed something?
[1] - https://github.com/lategoodbye/rpi-zero/commits/bcm2711-genet
