Re: [PATCH 1/2] dt-bindings: i2c: replace property i2c-mux-idle-disconnect

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 2019-10-14 13:25, Biwen Li wrote:
> This replaces property i2c-mux-idle-disconnect with idle-state
> 
> Signed-off-by: Biwen Li <biwen.li@xxxxxxx>
> ---
>  Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt | 4 +---
>  1 file changed, 1 insertion(+), 3 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
> index 30ac6a60f041..f2db517b1635 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-mux-pca954x.txt
> @@ -25,9 +25,7 @@ Required Properties:
>  Optional Properties:
>  
>    - reset-gpios: Reference to the GPIO connected to the reset input.
> -  - i2c-mux-idle-disconnect: Boolean; if defined, forces mux to disconnect all
> -    children in idle state. This is necessary for example, if there are several
> -    multiplexers on the bus and the devices behind them use same I2C addresses.
> +  - idle-state: Please refer to Documentation/devicetree/bindings/mux/mux-controller.txt
>    - interrupts: Interrupt mapping for IRQ.
>    - interrupt-controller: Marks the device node as an interrupt controller.
>    - #interrupt-cells : Should be two.
> 

You can't just remove i2c-mux-idle-disconnect. It needs to remain, and the
driver needs to maintain support for this in case a new kernel is running
with an old devicetree.

Cheers,
Peter




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux