On Mon, Sep 16, 2019 at 09:15:42PM +0530, Manivannan Sadhasivam wrote: > Add MMC controller support for Actions Semi S900 SoC. There are 4 MMC > controllers in this SoC which can be used for accessing SD/MMC/SDIO cards. > > Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@xxxxxxxxxx> Applied for v5.5. Thanks, Mani > --- > arch/arm64/boot/dts/actions/s900.dtsi | 45 +++++++++++++++++++++++++++ > 1 file changed, 45 insertions(+) > > diff --git a/arch/arm64/boot/dts/actions/s900.dtsi b/arch/arm64/boot/dts/actions/s900.dtsi > index df3a68a3ac97..eb35cf78ab73 100644 > --- a/arch/arm64/boot/dts/actions/s900.dtsi > +++ b/arch/arm64/boot/dts/actions/s900.dtsi > @@ -4,6 +4,7 @@ > */ > > #include <dt-bindings/clock/actions,s900-cmu.h> > +#include <dt-bindings/gpio/gpio.h> > #include <dt-bindings/interrupt-controller/arm-gic.h> > #include <dt-bindings/reset/actions,s900-reset.h> > > @@ -284,5 +285,49 @@ > dma-requests = <46>; > clocks = <&cmu CLK_DMAC>; > }; > + > + mmc0: mmc@e0330000 { > + compatible = "actions,owl-mmc"; > + reg = <0x0 0xe0330000 0x0 0x4000>; > + interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu CLK_SD0>; > + resets = <&cmu RESET_SD0>; > + dmas = <&dma 2>; > + dma-names = "mmc"; > + status = "disabled"; > + }; > + > + mmc1: mmc@e0334000 { > + compatible = "actions,owl-mmc"; > + reg = <0x0 0xe0334000 0x0 0x4000>; > + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu CLK_SD1>; > + resets = <&cmu RESET_SD1>; > + dmas = <&dma 3>; > + dma-names = "mmc"; > + status = "disabled"; > + }; > + > + mmc2: mmc@e0338000 { > + compatible = "actions,owl-mmc"; > + reg = <0x0 0xe0338000 0x0 0x4000>; > + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu CLK_SD2>; > + resets = <&cmu RESET_SD2>; > + dmas = <&dma 4>; > + dma-names = "mmc"; > + status = "disabled"; > + }; > + > + mmc3: mmc@e033c000 { > + compatible = "actions,owl-mmc"; > + reg = <0x0 0xe033c000 0x0 0x4000>; > + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cmu CLK_SD3>; > + resets = <&cmu RESET_SD3>; > + dmas = <&dma 46>; > + dma-names = "mmc"; > + status = "disabled"; > + }; > }; > }; > -- > 2.17.1 >