Re: [PATCH v4 2/5] phy: tegra: xusb: Add Tegra194 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 09, 2019 at 10:43:40AM +0800, JC Kuo wrote:
> Add support for the XUSB pad controller found on Tegra194 SoCs. It is
> mostly similar to the same IP found on Tegra186, but the number of
> pads exposed differs, as do the programming sequences. Because most of
> the Tegra194 XUSB PADCTL registers definition and programming sequence
> are the same as Tegra186, Tegra194 XUSB PADCTL can share the same
> driver, xusb-tegra186.c, with Tegra186 XUSB PADCTL.
> 
> Tegra194 XUSB PADCTL supports up to USB 3.1 Gen 2 speed, however, it
> is possible for some platforms have long signal trace that could not
> provide sufficient electrical environment for Gen 2 speed. This patch
> introduce a new device node property "nvidia,disable-gen2" that can
> be used to specifically disable Gen 2 speed for a particular USB 3.0
> port so that the port can be limited to Gen 1 speed and avoid the
> instability.
> 
> Signed-off-by: JC Kuo <jckuo@xxxxxxxxxx>
> ---
> Changes in v4: none
> Changes in v3: none
> Changes in v2:
> - removed unnecessary #if/#endif pairs
> - introduce new soc->supports_gen2 flag which indicate whether or not
>   a soc supports USB 3.1 Gen 2 speed
> 
>  drivers/phy/tegra/Makefile        |  1 +
>  drivers/phy/tegra/xusb-tegra186.c | 74 +++++++++++++++++++++++++++++++
>  drivers/phy/tegra/xusb.c          |  7 +++
>  drivers/phy/tegra/xusb.h          |  6 +++
>  4 files changed, 88 insertions(+)

Acked-by: Thierry Reding <treding@xxxxxxxxxx>

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux