-----Original Message-----
From: Shawn Guo <shawnguo@xxxxxxxxxx>
Sent: 2019年10月14日 14:52
To: Yinbo Zhu <yinbo.zhu@xxxxxxx>
Cc: Leo Li <leoyang.li@xxxxxxx>; Rob Herring <robh+dt@xxxxxxxxxx>; Mark Rutland <mark.rutland@xxxxxxx>; Xiaobo Xie <xiaobo.xie@xxxxxxx>; Jiafei Pan <jiafei.pan@xxxxxxx>; Ran Wang <ran.wang_1@xxxxxxx>; linux-arm-kernel@xxxxxxxxxxxxxxxxxxx; devicetree@xxxxxxxxxxxxxxx; linux-kernel@xxxxxxxxxxxxxxx
Subject: [EXT] Re: [PATCH v2] usb: dwc3: enable otg mode for dwc3 usb ip on layerscape
Caution: EXT Email
On Tue, Sep 24, 2019 at 11:29:03AM +0800, Yinbo Zhu wrote:
> layerscape otg function should be supported HNP SRP and ADP protocol
> accroing to rm doc, but dwc3 code not realize it and use id pin to
> detect who is host or device(0 is host 1 is device) this patch is to
> enable OTG mode on ls1028ardb ls1088ardb and ls1046ardb in dts
>
> Signed-off-by: Yinbo Zhu <yinbo.zhu@xxxxxxx>
> ---
> arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts | 4 ++++
> arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts | 4 ++++
> arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts | 1 +
> this is an arm64 DTS patch, so the patch prefix should be something like 'arm64 dts: fsl: ...'
> Shawn
Hi Shawn guo,
This patch I had updated to v3, please check that v3 version.
Regards,
Yinbo Zhu.
> 3 files changed, 9 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> index 9fb9113..076cac6 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a-rdb.dts
> @@ -171,3 +171,7 @@
> &sata {
> status = "okay";
> };
> +
> +&usb1 {
> + dr_mode = "otg";
> +};
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> index 6a6514d..0c742be 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a-rdb.dts
> @@ -122,6 +122,10 @@
> };
> };
>
> +&usb1 {
> + dr_mode = "otg";
> +};
> +
> #include "fsl-ls1046-post.dtsi"
>
> &fman0 {
> diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> index 8e925df..90b1989 100644
> --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a-rdb.dts
> @@ -95,5 +95,6 @@
> };
>
> &usb1 {
> + dr_mode = "otg";
> status = "okay";
> };
> --
> 2.9.5
>
