On 10/12/19 12:25 PM, Dan Robertson wrote: > Add a IIO driver for the Bosch BMA400 3-axes ultra-low power accelerometer. > The driver supports reading from the acceleration and temperature > registers. The driver also supports reading and configuring the output data > rate, oversampling ratio, and scale. > > Signed-off-by: Dan Robertson <dan@xxxxxxxxxxxxxxx> > --- > drivers/iio/accel/Kconfig | 18 + > drivers/iio/accel/Makefile | 2 + > drivers/iio/accel/bma400.h | 80 ++++ > drivers/iio/accel/bma400_core.c | 788 ++++++++++++++++++++++++++++++++ > drivers/iio/accel/bma400_i2c.c | 60 +++ > 5 files changed, 948 insertions(+) > create mode 100644 drivers/iio/accel/bma400.h > create mode 100644 drivers/iio/accel/bma400_core.c > create mode 100644 drivers/iio/accel/bma400_i2c.c No comment other than thank you for ignoring my previous comments. :( -- ~Randy
