On Sat, 12 Oct 2019 03:54:19 +0000 Dan Robertson <dan@xxxxxxxxxxxxxxx> wrote: > Add devicetree binding for the Bosch BMA400 3-axes ultra-low power > accelerometer sensor. > > Signed-off-by: Dan Robertson <dan@xxxxxxxxxxxxxxx> Hi Dan, Apologies for not pointing this out in V1 but all new IIO bindings need to be in the yaml format rather than plain text. Please convert this one over for v3. Content wise it's fine btw! Jonathan > --- > .../devicetree/bindings/iio/accel/bma400.txt | 16 ++++++++++++++++ > 1 file changed, 16 insertions(+) > create mode 100644 Documentation/devicetree/bindings/iio/accel/bma400.txt > > diff --git a/Documentation/devicetree/bindings/iio/accel/bma400.txt b/Documentation/devicetree/bindings/iio/accel/bma400.txt > new file mode 100644 > index 000000000000..abba4f104941 > --- /dev/null > +++ b/Documentation/devicetree/bindings/iio/accel/bma400.txt > @@ -0,0 +1,16 @@ > + > +* Bosch BMA400 triaxial acceleration sensor > + > +https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA400-DS000.pdf > + > +Required properties: > + > + - compatible : should be "bosch,bma400" > + - reg : the I2C address of the sensor > + > +Example: > + > +bma400@14 { > + compatible = "bosch,bma400"; > + reg = <0x14>; > +}; > >
