Re: [PATCH v3 2/2] dt-bindings: asoc: Add ADAU7118 documentation

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Oct 10, 2019 at 4:08 PM Rob Herring <robh@xxxxxxxxxx> wrote:
>
> On Thu, Oct 10, 2019 at 09:42:34AM +0200, Nuno Sá wrote:
> > Document the ADAU7118 8 channel PDM to I2S/TDM converter devicetree
> > bindings.
> >
> > Signed-off-by: Nuno Sá <nuno.sa@xxxxxxxxxx>
> > ---
> > Changes in v2:
> >  * List regulators as required;
> >
> > Changes in v3:
> >  * Set the correct license for new bindings.
> >
> >  .../bindings/sound/adi,adau7118.yaml          | 90 +++++++++++++++++++
> >  1 file changed, 90 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/sound/adi,adau7118.yaml

Looks like Mark already applied this. Please send a follow-up patch
addressing my comments.

> >
> > diff --git a/Documentation/devicetree/bindings/sound/adi,adau7118.yaml b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
> > new file mode 100644
> > index 000000000000..cfcef602b3d9
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/sound/adi,adau7118.yaml
> > @@ -0,0 +1,90 @@
> > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/sound/adi,adau7118.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +
> > +title: Analog Devices ADAU7118 8 Channel PDM to I2S/TDM Converter
> > +
> > +maintainers:
> > +  - Nuno Sá <nuno.sa@xxxxxxxxxx>
> > +
> > +description: |
> > +  Analog Devices ADAU7118 8 Channel PDM to I2S/TDM Converter over I2C or HW
> > +  standalone mode.
> > +  https://www.analog.com/media/en/technical-documentation/data-sheets/ADAU7118.pdf
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - adi,adau7118
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  "#sound-dai-cells":
> > +    const: 0
> > +
> > +  IOVDD-supply:
>
> Use lowercase please.
>
> > +    description: Digital Input/Output Power Supply.
> > +    $ref: "/schemas/types.yaml#/definitions/phandle"
>
> *-supply already has a type, so just a description is enough.
>
> > +
> > +  DVDD-supply:
> > +    description: Internal Core Digital Power Supply.
> > +    $ref: "/schemas/types.yaml#/definitions/phandle"
>
> Same here.
>
> > +
> > +  adi,decimation-ratio:
> > +    description: |
> > +      This property set's the decimation ratio of PDM to PCM audio data.
> > +    allOf:
> > +      - $ref: /schemas/types.yaml#/definitions/uint32
> > +      - enum: [64, 32, 16]
> > +        default: 64
> > +
> > +  adi,pdm-clk-map:
> > +    description: |
> > +      The ADAU7118 has two PDM clocks for the four Inputs. Each input must be
> > +      assigned to one of these two clocks. This property set's the mapping
> > +      between the clocks and the inputs.
> > +    allOf:
> > +      - $ref: /schemas/types.yaml#/definitions/uint32-array
> > +      - minItems: 4
> > +        maxItems: 4
> > +        items:
> > +          maximum: 1
> > +        default: [0, 0, 1, 1]
> > +
> > +required:
> > +  - "#sound-dai-cells"
> > +  - compatible
> > +  - IOVDD-supply
> > +  - DVDD-supply
> > +
> > +examples:
> > +  - |
> > +    i2c0 {
>
> i2c {
>
> > +        /* example with i2c support */
> > +        #address-cells = <1>;
> > +        #size-cells = <0>;
> > +        status = "okay";
>
> Don't show status in examples.
>
> > +        adau7118_codec: adau7118-codec@14 {
>
> audio-codec@14
>
> > +                compatible = "adi,adau7118";
> > +                reg = <14>;
> > +                #sound-dai-cells = <0>;
> > +                status = "okay";
> > +                IOVDD-supply = <&supply>;
> > +                DVDD-supply = <&supply>;
> > +                adi,pdm-clk-map = <1 1 0 0>;
> > +                adi,decimation-ratio = <16>;
> > +        };
> > +    };
> > +
> > +    /* example with hw standalone mode */
> > +    adau7118_codec_hw: adau7118-codec-hw {
> > +            compatible = "adi,adau7118";
> > +            #sound-dai-cells = <0>;
> > +            status = "okay";
> > +            IOVDD-supply = <&supply>;
> > +            DVDD-supply = <&supply>;
> > +    };
> > --
> > 2.23.0
> >




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux