Add support for the Q6SSTOP clock control used on qcs404
based devices. This would allow wcss remoteproc driver to
control the required WCSS Q6SSTOP clock/reset controls to
bring the subsystem out of reset and shutdown the WCSS Q6DSP.
Changes in v4:
- changed binding doc license to (GPL-2.0-only OR BSD-2-Clause).
Changes in v3:
- Fixed dt binding errors.
Changes in v2:
- changed binding doc to yaml format.
- Fixed alignment in q6sstop cc driver.
Govind Singh (2):
dt-bindings: clock: qcom: Add QCOM Q6SSTOP clock controller bindings
clk: qcom: Add Q6SSTOP clock controller for QCS404
.../bindings/clock/qcom,q6sstopcc.yaml | 43 ++++
drivers/clk/qcom/Kconfig | 8 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/q6sstop-qcs404.c | 223 ++++++++++++++++++
.../dt-bindings/clock/qcom,q6sstopcc-qcs404.h | 18 ++
5 files changed, 293 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/qcom,q6sstopcc.yaml
create mode 100644 drivers/clk/qcom/q6sstop-qcs404.c
create mode 100644 include/dt-bindings/clock/qcom,q6sstopcc-qcs404.h
--
2.22.0
