On 07/10/2019 13:53, Rob Herring wrote:
On Mon, Oct 7, 2019 at 6:33 AM Robin Murphy <robin.murphy@xxxxxxx> wrote:
Beelink A1 is a TV box implementing the higher-end options of the
RK3328 reference design - the DTB from the stock Android firmware is
clearly the "rk3328-box-plus" variant from the Rockchip 3.10 BSP with
minor modifications to accommodate the USB WiFi module and additional
VFD-style LED driver. It features:
- 4GB of 32-bit LPDDR3
- 16GB of HS200 eMMC (newer models with 32GB also exist)
- Realtek RTL8211F phy for gigabit ethernet
- Fn-Link 6221E-UUC module (RealTek RTL8821CU) for 11ac WiFi and Bluetooth 4.2
- HDMI and analog A/V
- 1x USB 3.0 type A host, 1x USB 2.0 type A OTG, 1x micro SD
- IR receiver and a neat little LED clock display.
Signed-off-by: Robin Murphy <robin.murphy@xxxxxxx>
---
One question I'm wondering about is whether it's worth pushing the HDMI
and analog codec audio cards down into rk3328.dtsi (as with HDMI audio
on RK3399), since those audio pipelines are internal to the SoC and the
board only really governs whether the outputs are wired up or not.
Seems reasonable. One other candidate below.
.../devicetree/bindings/arm/rockchip.yaml | 5 +
In the future, please split bindings to a separate patch.
Ha, busted! I thought this might be trivial enough to slip through, but
I'll split it out if you prefer.
arch/arm64/boot/dts/rockchip/Makefile | 1 +
arch/arm64/boot/dts/rockchip/rk3328-a1.dts | 399 ++++++++++++++++++
3 files changed, 405 insertions(+)
create mode 100644 arch/arm64/boot/dts/rockchip/rk3328-a1.dts
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml
index c82c5e57d44c..f27f7805f57e 100644
--- a/Documentation/devicetree/bindings/arm/rockchip.yaml
+++ b/Documentation/devicetree/bindings/arm/rockchip.yaml
@@ -40,6 +40,11 @@ properties:
- const: asus,rk3288-tinker-s
- const: rockchip,rk3288
+ - description: Beelink A1
+ items:
+ - const: azw,beelink-a1
+ - const: rockchip,rk3328
+
- description: bq Curie 2 tablet
items:
- const: mundoreader,bq-curie2
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 1f18a9392d15..a6f250e7cde2 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -1,5 +1,6 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-roc-cc.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
new file mode 100644
index 000000000000..03ad663ff821
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
+// Copyright (c) 2017-2019 Arm Ltd.
+
+/dts-v1/;
+#include "rk3328.dtsi"
+
+/ {
+ model = "Beelink A1";
+ compatible = "azw,beelink-a1", "rockchip,rk3328";
+
+ /*
+ * UART pins, as viewed with bottom of case removed:
+ *
+ * Front
+ * /-------
+ * L / o <- Gnd
+ * e / o <-- Rx
+ * f / o <--- Tx
+ * t / o <---- +3.3v
+ * |
+ */
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ gmac_clkin: external-gmac-clock {
+ compatible = "fixed-clock";
+ clock-frequency = <125000000>;
+ clock-output-names = "gmac_clkin";
+ #clock-cells = <0>;
+ };
+
+ vcc_host_5v: usb3-current-switch {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpio = <&gpio0 RK_PA0 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&usb30_host_drv>;
+ regulator-name = "vcc_host_5v";
+ vin-supply = <&vcc_sys>;
+ };
+
+ vcc_sys: vcc-sys {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_sys";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ cpus {
+ idle-states {
+ entry-method = "arm,psci";
+
+ cpu_sleep: cpu-sleep {
+ compatible = "arm,idle-state";
+ arm,psci-suspend-param = <0x0010000>;
+ local-timer-stop;
+ entry-latency-us = <120>;
+ exit-latency-us = <250>;
+ min-residency-us = <900>;
This doesn't seem like something that's board specific, but I guess
the regulator could have some influence on these times. If so, the
board file could always override a default.
True, this is traceable back to the Rockchip Android BSP where it's
actually applied to the entire SoC family[1]. I don't know if there's
likely to be any difference between the downstream "RKTRUST" firmware
binaries (which this nominally represents) and upstream ATF in terms of
their PSCI implementation/performance.
I've not got round to properly tinkering with suspend/resume and power
management stuff yet, so I guess another option would be to just forget
about this part for now - Heiko, any opinions?
Cheers,
Robin.
[1]
https://github.com/rockchip-linux/kernel/blob/release-3.10/arch/arm64/boot/dts/rk322xh.dtsi#L107-L118
