Use non-empty ranges for usb-phy to make the layout of
its registers clearer;
Replace deprecated compatible by generic
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
v3: no changes
v2: use generic compatible
---
arch/arm64/boot/dts/mediatek/mt2712e.dtsi | 42 ++++++++++++-----------
1 file changed, 22 insertions(+), 20 deletions(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
index 43307bad3f0d..e24f2f2f6004 100644
--- a/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt2712e.dtsi
@@ -697,30 +697,31 @@
};
u3phy0: usb-phy@11290000 {
- compatible = "mediatek,mt2712-u3phy";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ compatible = "mediatek,mt2712-tphy",
+ "mediatek,generic-tphy-v2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x11290000 0x9000>;
status = "okay";
- u2port0: usb-phy@11290000 {
- reg = <0 0x11290000 0 0x700>;
+ u2port0: usb-phy@0 {
+ reg = <0x0 0x700>;
clocks = <&clk26m>;
clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
- u2port1: usb-phy@11298000 {
- reg = <0 0x11298000 0 0x700>;
+ u2port1: usb-phy@8000 {
+ reg = <0x8000 0x700>;
clocks = <&clk26m>;
clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
- u3port0: usb-phy@11298700 {
- reg = <0 0x11298700 0 0x900>;
+ u3port0: usb-phy@8700 {
+ reg = <0x8700 0x900>;
clocks = <&clk26m>;
clock-names = "ref";
#phy-cells = <1>;
@@ -760,30 +761,31 @@
};
u3phy1: usb-phy@112e0000 {
- compatible = "mediatek,mt2712-u3phy";
- #address-cells = <2>;
- #size-cells = <2>;
- ranges;
+ compatible = "mediatek,mt2712-tphy",
+ "mediatek,generic-tphy-v2";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x112e0000 0x9000>;
status = "okay";
- u2port2: usb-phy@112e0000 {
- reg = <0 0x112e0000 0 0x700>;
+ u2port2: usb-phy@0 {
+ reg = <0x0 0x700>;
clocks = <&clk26m>;
clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
- u2port3: usb-phy@112e8000 {
- reg = <0 0x112e8000 0 0x700>;
+ u2port3: usb-phy@8000 {
+ reg = <0x8000 0x700>;
clocks = <&clk26m>;
clock-names = "ref";
#phy-cells = <1>;
status = "okay";
};
- u3port1: usb-phy@112e8700 {
- reg = <0 0x112e8700 0 0x900>;
+ u3port1: usb-phy@8700 {
+ reg = <0x8700 0x900>;
clocks = <&clk26m>;
clock-names = "ref";
#phy-cells = <1>;
--
2.23.0
