Make the ref clock optional, then we no need refer to a fixed-clock in DTS anymore when the clock of USB3 PHY comes from oscillator directly Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> --- v3: add acked-by Rob v2: no changes --- .../devicetree/bindings/phy/phy-mtk-tphy.txt | 13 +++++++------ 1 file changed, 7 insertions(+), 6 deletions(-) diff --git a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt index ce6abfbdfbe1..1f4a36dd80e0 100644 --- a/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt +++ b/Documentation/devicetree/bindings/phy/phy-mtk-tphy.txt @@ -34,12 +34,6 @@ Optional properties (controller (parent) node): Required properties (port (child) node): - reg : address and length of the register set for the port. -- clocks : a list of phandle + clock-specifier pairs, one for each - entry in clock-names -- clock-names : must contain - "ref": 48M reference clock for HighSpeed analog phy; and 26M - reference clock for SuperSpeed analog phy, sometimes is - 24M, 25M or 27M, depended on platform. - #phy-cells : should be 1 (See second example) cell after port phandle is phy type from: - PHY_TYPE_USB2 @@ -48,6 +42,13 @@ Required properties (port (child) node): - PHY_TYPE_SATA Optional properties (PHY_TYPE_USB2 port (child) node): +- clocks : a list of phandle + clock-specifier pairs, one for each + entry in clock-names +- clock-names : may contain + "ref": 48M reference clock for HighSpeed anolog phy; and 26M + reference clock for SuperSpeed anolog phy, sometimes is + 24M, 25M or 27M, depended on platform. + - mediatek,eye-src : u32, the value of slew rate calibrate - mediatek,eye-vrt : u32, the selection of VRT reference voltage - mediatek,eye-term : u32, the selection of HS_TX TERM reference voltage -- 2.23.0
