Re: [RFC][PATCH v2 2/5] usb: dwc3: Execute GCTL Core Soft Reset while switch mdoe for Hisilicon Kirin Soc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, Oct 7, 2019 at 4:39 PM Jack Pham <jackp@xxxxxxxxxxxxxx> wrote:
>
> Hi John, Yu, Felipe,
>
> On Mon, Oct 07, 2019 at 05:55:50PM +0000, John Stultz wrote:
> > From: Yu Chen <chenyu56@xxxxxxxxxx>
> >
> > A GCTL soft reset should be executed when switch mode for dwc3 core
> > of Hisilicon Kirin Soc.
> >
> > Cc: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
> > Cc: Felipe Balbi <balbi@xxxxxxxxxx>
> > Cc: Andy Shevchenko <andy.shevchenko@xxxxxxxxx>
> > Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> > Cc: Mark Rutland <mark.rutland@xxxxxxx>
> > Cc: Yu Chen <chenyu56@xxxxxxxxxx>
> > Cc: Matthias Brugger <matthias.bgg@xxxxxxxxx>
> > Cc: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
> > Cc: linux-usb@xxxxxxxxxxxxxxx
> > Cc: devicetree@xxxxxxxxxxxxxxx
> > Signed-off-by: Yu Chen <chenyu56@xxxxxxxxxx>
> > Signed-off-by: John Stultz <john.stultz@xxxxxxxxxx>
> > ---
> >  drivers/usb/dwc3/core.c | 20 ++++++++++++++++++++
> >  drivers/usb/dwc3/core.h |  3 +++
> >  2 files changed, 23 insertions(+)
> >
> > diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> > index 999ce5e84d3c..440261432421 100644
> > --- a/drivers/usb/dwc3/core.c
> > +++ b/drivers/usb/dwc3/core.c
> > @@ -112,6 +112,19 @@ void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
> >       dwc->current_dr_role = mode;
> >  }
> >
> > +static void dwc3_gctl_core_soft_reset(struct dwc3 *dwc)
> > +{
> > +     u32 reg;
> > +
> > +     reg = dwc3_readl(dwc->regs, DWC3_GCTL);
> > +     reg |= DWC3_GCTL_CORESOFTRESET;
> > +     dwc3_writel(dwc->regs, DWC3_GCTL, reg);
> > +
> > +     reg = dwc3_readl(dwc->regs, DWC3_GCTL);
> > +     reg &= ~DWC3_GCTL_CORESOFTRESET;
> > +     dwc3_writel(dwc->regs, DWC3_GCTL, reg);
> > +}
> > +
> >  static void __dwc3_set_mode(struct work_struct *work)
> >  {
> >       struct dwc3 *dwc = work_to_dwc(work);
> > @@ -156,6 +169,10 @@ static void __dwc3_set_mode(struct work_struct *work)
> >
> >       dwc3_set_prtcap(dwc, dwc->desired_dr_role);
> >
> > +     /* Execute a GCTL Core Soft Reset when switch mode */
> > +     if (dwc->gctl_reset_quirk)
> > +             dwc3_gctl_core_soft_reset(dwc);
> > +
>
> In fact it is mentioned in the Synopsys databook to perform a GCTL
> CoreSoftReset when changing the PrtCapDir between device & host modes.
> So I think this should apply generally without a quirk. Further, it
> states to do this *prior* to writing PrtCapDir, so should it go before
> dwc3_set_prtcap() instead?

Sounds good. I have no such access to the hardware docs, so I really
appreciate your input here!

I'll refactor it as you describe and remove the quirk flag.

thanks
-john



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux