Re: [PATCH] ARM: dts: Set status to disable for MMC3

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 7 Oct 2019 09:16:34 -0700
Tony Lindgren <tony@xxxxxxxxxxx> wrote:

> Hi,
> 
> * Emmanuel Vadot <manu@xxxxxxxxxxx> [191007 08:04]:
> > Commit 5b63fb90adb95 ("ARM: dts: Fix incomplete dts data for am3 and am4 mmc")
> > fixed the mmc instances on the l3 interconnect but removed the disabled status.
> > Fix this and let boards properly define it if it have it.
> 
> The dts default is "okay", and should be fine for all the
> internal devices even if not pinned out on the board. This
> way the devices get properly idled during boot, and we
> avoid repeating status = "enabled" over and over again in
> the board specific dts files.

 That is not correct, if a status != "disabled" then pinmuxing will be
configured for this device and if multiple devices share the same pin
then you have a problem. Note that I have (almost) no knowledge on Ti
SoC but I doubt that this is not the case on them.
 Also every other boards that I work with use the standard of setting
every node to disabled in the dtsi and let the board enable them at
will. Is there something different happening in the TI world ?

> Then the board specific dts files might want to configure
> devices with status = "disabled" if really needed. But this
> should be only done for devices that Linux must not use,
> such as crypto acclerators on secure devices if claimed by
> the secure mode.
> 
> So if this fixes something, it's almost certainly a sign
> of something else being broken?

 In this case it's FreeBSD being  because (I think) we have bad support
for the clocks for this module so we panic when we read from it as the
module isn't clocked. And since I find it wrong to have device enabled
while it isn't present I've sent this patch.

 Cheers,

> Regards,
> 
> Tony
> 
> 
> > Fixes: 5b63fb90adb95 ("ARM: dts: Fix incomplete dts data for am3 and am4 mmc")
> > Signed-off-by: Emmanuel Vadot <manu@xxxxxxxxxxx>
> > ---
> >  arch/arm/boot/dts/am33xx.dtsi | 1 +
> >  1 file changed, 1 insertion(+)
> > 
> > diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
> > index fb6b8aa12cc5..b3a1fd9e39fa 100644
> > --- a/arch/arm/boot/dts/am33xx.dtsi
> > +++ b/arch/arm/boot/dts/am33xx.dtsi
> > @@ -260,6 +260,7 @@
> >  				ti,needs-special-reset;
> >  				interrupts = <29>;
> >  				reg = <0x0 0x1000>;
> > +				status = "disabled";
> >  			};
> >  		};
> >  
> > -- 
> > 2.22.0
> > 


-- 
Emmanuel Vadot <manu@xxxxxxxxxxxxxxxx>



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux