Hi Maxime, On Fri, Aug 23, 2019 at 12:31:34PM +0200, megous hlavni wrote: > From: Ondrej Jirman <megous@xxxxxxxxxx> > > (Resend to add missing lists, sorry for the noise.) > > This series implements bluetooth support for Xunlong Orange Pi 3 board. > > The board uses AP6256 WiFi/BT 5.0 chip. > > Summary of changes: > > - add more delay to let initialize the chip > - let the kernel detect firmware file path > - add new compatible and update dt-bindings > - update Orange Pi 3 / H6 DTS Please consider the DTS patches for 5.5. Thanks, Ondrej > Please take a look. > > thank you and regards, > Ondrej Jirman > > Ondrej Jirman (5): > dt-bindings: net: Add compatible for BCM4345C5 bluetooth device > bluetooth: bcm: Add support for loading firmware for BCM4345C5 > bluetooth: hci_bcm: Give more time to come out of reset > arm64: dts: allwinner: h6: Add pin configs for uart1 > arm64: dts: allwinner: orange-pi-3: Enable UART1 / Bluetooth > > .../bindings/net/broadcom-bluetooth.txt | 1 + > .../dts/allwinner/sun50i-h6-orangepi-3.dts | 19 +++++++++++++++++++ > arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 10 ++++++++++ > drivers/bluetooth/btbcm.c | 3 +++ > drivers/bluetooth/hci_bcm.c | 3 ++- > 5 files changed, 35 insertions(+), 1 deletion(-) > > -- > 2.23.0 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel@xxxxxxxxxxxxxxxxxxx > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
