As per schematics add missing 5V_EN gpio signal to enable
VCC5V regulator node.
Fixes: c35f6dc5c377 (arm64: dts: meson: Add minimal support for Odroid-N2)
Cc: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx>
Cc: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
Cc: Neil Armstrong <narmstrong@xxxxxxxxxxxx>
Signed-off-by: Anand Moon <linux.amoon@xxxxxxxxx>
---
arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
index 42f15405750c..a9a661258886 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-odroid-n2.dts
@@ -94,6 +94,9 @@
regulator-max-microvolt = <5000000>;
regulator-always-on;
vin-supply = <&main_12v>;
+ /* U12 NB679GD 5V_EN */
+ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+ enable-active-high;
};
vcc_1v8: regulator-vcc_1v8 {
--
2.23.0
