RE: [PATCH V2 1/5] dt-bindings: fsl: scu: add scu power key binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi, Shawn

> On Mon, Sep 23, 2019 at 02:34:07AM +0000, Anson Huang wrote:
> > Hi, Pavel
> >
> > > Subject: Re: [PATCH V2 1/5] dt-bindings: fsl: scu: add scu power key
> > > binding
> > >
> > > On Tue 2019-09-03 10:03:40, Anson Huang wrote:
> > > > NXP i.MX8QXP is an ARMv8 SoC with a Cortex-M4 core inside as
> > > > system controller, the system controller is in charge of system
> > > > power, clock and power key event etc. management, Linux kernel has
> > > > to communicate with system controller via MU (message unit) IPC to
> > > > get power key event, add binding doc for i.MX system controller power
> key driver.
> > > >
> > > > Signed-off-by: Anson Huang <Anson.Huang@xxxxxxx>
> > > > ---
> > > > Changes since V1:
> > > > 	- remove "wakeup-source" property, as it is NOT needed for SCU
> > > interrupt;
> > > > 	- remove "status" in example.
> > > > ---
> > > >  .../devicetree/bindings/arm/freescale/fsl,scu.txt          | 14
> > > ++++++++++++++
> > > >  1 file changed, 14 insertions(+)
> > > >
> > > > diff --git
> > > > a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > > > b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > > > index c149fad..f93e2e4 100644
> > > > --- a/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > > > +++ b/Documentation/devicetree/bindings/arm/freescale/fsl,scu.txt
> > > > @@ -157,6 +157,15 @@ Required properties:
> > > >  Optional properties:
> > > >  - timeout-sec: contains the watchdog timeout in seconds.
> > > >
> > > > +Power key bindings based on SCU Message Protocol
> > > > +------------------------------------------------------------
> > > > +
> > > > +Required properties:
> > > > +- compatible: should be:
> > > > +              "fsl,imx8qxp-sc-pwrkey"
> > > > +              followed by "fsl,imx-sc-pwrkey";
> > > > +- linux,keycodes: See
> > > > +Documentation/devicetree/bindings/input/keys.txt
> > >
> > > Note you have keycode_s_ here, but keycode in the example and in the
> > > dts patch.
> >
> > NOT quite understand your point, could you please provide more details?
> 
> The property being used in driver, DTS, and DT example in the bindings are
> all 'linux,keycode' rather than 'linux,keycodes'.

I see now, since Documentation/devicetree/bindings/input/keys.txt uses "linux,keycodes",
so I will also use "linux,keycodes" for driver, DTS and DT example in V3.

Thanks,
Anson




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux