The fixed clocks doesn't form some kind of bus. So let's remove it.
This fixes the follow DT schema warnings:
clocks: clock@3:reg:0: [3] is too short
clocks: clock@4:reg:0: [4] is too short
clocks: $nodename:0: 'clocks' does not match '^(bus|soc|axi|ahb|apb)(@[0-9a-f]+)?$'
clocks: #size-cells:0:0: 0 is not one of [1, 2]
clocks: 'ranges' is a required property
clock@3: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
clock@4: 'reg' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Stefan Wahren <wahrenst@xxxxxxx>
---
arch/arm/boot/dts/bcm283x.dtsi | 10 ++--------
1 file changed, 2 insertions(+), 8 deletions(-)
diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi
index 2d191fc..f16899d 100644
--- a/arch/arm/boot/dts/bcm283x.dtsi
+++ b/arch/arm/boot/dts/bcm283x.dtsi
@@ -650,22 +650,16 @@
};
clocks {
- compatible = "simple-bus";
- #address-cells = <1>;
- #size-cells = <0>;
-
/* The oscillator is the root of the clock tree. */
- clk_osc: clock@3 {
+ clk_osc: clk-osc {
compatible = "fixed-clock";
- reg = <3>;
#clock-cells = <0>;
clock-output-names = "osc";
clock-frequency = <19200000>;
};
- clk_usb: clock@4 {
+ clk_usb: clk-usb {
compatible = "fixed-clock";
- reg = <4>;
#clock-cells = <0>;
clock-output-names = "otg";
clock-frequency = <480000000>;
--
2.7.4
