On Sat, Oct 5, 2019 at 9:56 PM Shawn Guo <shawnguo@xxxxxxxxxx> wrote: > > On Mon, Sep 09, 2019 at 05:02:44PM +0800, Yinbo Zhu wrote: > > layerscape otg function should be supported HNP SRP and ADP protocol > > accroing to rm doc, but dwc3 code not realize it and use id pin to > > detect who is host or device(0 is host 1 is device) this patch is to > > enable OTG mode on ls1028ardb ls1088ardb and ls1046ardb in dts > > > > Signed-off-by: Yinbo Zhu <yinbo.zhu@xxxxxxx> > > The patch prefix should be something like: 'arm64: dts: ...' > > @Leo, do you agree with the changes? No. The USB mode of operation should be defined at board level. > > Shawn > > > --- > > arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 2 +- > > arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 2 +- > > arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi | 2 +- > > 3 files changed, 3 insertions(+), 3 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > > index 7975519b4f56..5810d0400dbc 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi > > @@ -320,7 +320,7 @@ > > compatible = "fsl,ls1028a-dwc3", "snps,dwc3"; > > reg = <0x0 0x3110000 0x0 0x10000>; > > interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; > > - dr_mode = "host"; > > + dr_mode = "otg"; > > snps,dis_rxdet_inp3_quirk; > > snps,quirk-frame-length-adjustment = <0x20>; > > snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > > index b0ef08b090dd..ecce6151b9b0 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi > > @@ -582,7 +582,7 @@ > > compatible = "snps,dwc3"; > > reg = <0x0 0x3000000 0x0 0x10000>; > > interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; > > - dr_mode = "host"; > > + dr_mode = "otg"; > > snps,quirk-frame-length-adjustment = <0x20>; > > snps,dis_rxdet_inp3_quirk; > > snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>; > > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > > index dacd8cf03a7f..4b5413f7c90c 100644 > > --- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > > +++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi > > @@ -385,7 +385,7 @@ > > compatible = "snps,dwc3"; > > reg = <0x0 0x3110000 0x0 0x10000>; > > interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; > > - dr_mode = "host"; > > + dr_mode = "otg"; > > snps,quirk-frame-length-adjustment = <0x20>; > > snps,dis_rxdet_inp3_quirk; > > status = "disabled"; > > -- > > 2.17.1 > >
