Re: [PATCHv4 5/7] clk: samsung: exynos3250: Add clocks using common clock framework

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Chanwoo,

On 25.04.2014 03:16, Chanwoo Choi wrote:
From: Tomasz Figa <t.figa@xxxxxxxxxxx>

This patch add new the clock drvier of Exynos3250 SoC based on Cortex-A7
using common clock framework. The CMU (Clock Management Unit) of Exynos3250
control PLLs(Phase Locked Loops) and generate system clocks for CPU, buses,
and function clocks for individual IPs.

The CMU of Exynos3250 includes following clock doamins:
- CPU block for Cortex-A7 MPCore processor
- LEFTBUS/RIGHTBUS block
- TOP block for G3D/MFC/LCD0/ISP/CAM/FSYS/MFC/PERIL/PERIR

In original driver present in our internal tree I have separated several CMUs to account for certain factors caused by hardware design, which require such separation. Is there any reason why they were merged together into a single CMU again?


Cc: Mike Turquette <mturquette@xxxxxxxxxx>
Cc: Kukjin Kim <kgene.kim@xxxxxxxxxxx>
Cc: Rob Herring <robh+dt@xxxxxxxxxx>
Cc: Pawel Moll <pawel.moll@xxxxxxx>
Cc: Mark Rutland <mark.rutland@xxxxxxx>
Cc: Ian Campbell <ijc+devicetree@xxxxxxxxxxxxxx>
Cc: Kumar Gala <galak@xxxxxxxxxxxxxx>
Signed-off-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
Signed-off-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
Signed-off-by: Hyunhee Kim <hyunhee.kim@xxxxxxxxxxx>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
Signed-off-by: Inki Dae <inki.dae@xxxxxxxxxxx>
Signed-off-by: Seung-Woo Kim <sw0312.kim@xxxxxxxxxxx>
Signed-off-by: Jaehoon Chung <jh80.chung@xxxxxxxxxxx>
Signed-off-by: Karol Wrona <k.wrona@xxxxxxxxxxx>
Signed-off-by: YoungJun Cho <yj44.cho@xxxxxxxxxxx>
Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
---
  drivers/clk/samsung/Makefile           |   1 +
  drivers/clk/samsung/clk-exynos3250.c   | 785 +++++++++++++++++++++++++++++++++
  include/dt-bindings/clock/exynos3250.h | 256 +++++++++++
  3 files changed, 1042 insertions(+)
  create mode 100644 drivers/clk/samsung/clk-exynos3250.c
  create mode 100644 include/dt-bindings/clock/exynos3250.h

diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
index 8eb4799..d120797 100644
--- a/drivers/clk/samsung/Makefile
+++ b/drivers/clk/samsung/Makefile
@@ -3,6 +3,7 @@
  #

  obj-$(CONFIG_COMMON_CLK)	+= clk.o clk-pll.o
+obj-$(CONFIG_SOC_EXYNOS3250)	+= clk-exynos3250.o
  obj-$(CONFIG_ARCH_EXYNOS4)	+= clk-exynos4.o
  obj-$(CONFIG_SOC_EXYNOS5250)	+= clk-exynos5250.o
  obj-$(CONFIG_SOC_EXYNOS5420)	+= clk-exynos5420.o
diff --git a/drivers/clk/samsung/clk-exynos3250.c b/drivers/clk/samsung/clk-exynos3250.c
new file mode 100644
index 0000000..0574a76
--- /dev/null
+++ b/drivers/clk/samsung/clk-exynos3250.c
@@ -0,0 +1,785 @@
+/*
+ * Copyright (c) 2014 Samsung Electronics Co., Ltd.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * Common Clock Framework support for Exynos3250 SoC.
+ */
+
+#include <linux/clk.h>
+#include <linux/clkdev.h>
+#include <linux/clk-provider.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/platform_device.h>
+#include <linux/syscore_ops.h>
+
+#include <dt-bindings/clock/exynos3250.h>
+
+#include "clk.h"
+#include "clk-pll.h"
+
+#define SRC_LEFTBUS		0x4200
+#define DIV_LEFTBUS		0x4500
+#define GATE_IP_LEFTBUS		0x4800
+#define SRC_RIGHTBUS		0x8200
+#define DIV_RIGHTBUS		0x8500
+#define GATE_IP_RIGHTBUS	0x8800
+#define GATE_IP_PERIR		0x8960
+#define MPLL_LOCK		0xc010
+#define MPLL_CON0		0xc110
+#define VPLL_LOCK		0xc020
+#define VPLL_CON0		0xc120
+#define UPLL_LOCK		0xc030
+#define UPLL_CON0		0xc130
+#define SRC_TOP0		0xc210
+#define SRC_TOP1		0xc214
+#define SRC_CAM			0xc220
+#define SRC_MFC			0xc228
+#define SRC_G3D			0xc22c
+#define SRC_LCD			0xc234
+#define SRC_ISP			0xc238
+#define SRC_FSYS		0xc240
+#define SRC_PERIL0		0xc250
+#define SRC_PERIL1		0xc254
+#define SRC_MASK_TOP		0xc310
+#define SRC_MASK_CAM		0xc320
+#define SRC_MASK_LCD		0xc334
+#define SRC_MASK_ISP		0xc338
+#define SRC_MASK_FSYS		0xc340
+#define SRC_MASK_PERIL0		0xc350
+#define SRC_MASK_PERIL1		0xc354
+#define DIV_TOP			0xc510
+#define DIV_CAM			0xc520
+#define DIV_MFC			0xc528
+#define DIV_G3D			0xc52c
+#define DIV_LCD			0xc534
+#define DIV_ISP			0xc538
+#define DIV_FSYS0		0xc540
+#define DIV_FSYS1		0xc544
+#define DIV_FSYS2		0xc548
+#define DIV_PERIL0		0xc550
+#define DIV_PERIL1		0xc554
+#define DIV_PERIL3		0xc55c
+#define DIV_PERIL4		0xc560
+#define DIV_PERIL5		0xc564
+#define DIV_CAM1		0xc568
+#define CLKDIV2_RATIO		0xc580
+#define GATE_SCLK_CAM		0xc820
+#define GATE_SCLK_MFC		0xc828
+#define GATE_SCLK_G3D		0xc82c
+#define GATE_SCLK_LCD		0xc834
+#define GATE_SCLK_ISP_TOP	0xc838
+#define GATE_SCLK_FSYS		0xc840
+#define GATE_SCLK_PERIL		0xc850
+#define GATE_IP_CAM		0xc920
+#define GATE_IP_MFC		0xc928
+#define GATE_IP_G3D		0xc92c
+#define GATE_IP_LCD		0xc934
+#define GATE_IP_ISP		0xc938
+#define GATE_IP_FSYS		0xc940
+#define GATE_IP_PERIL		0xc950
+#define GATE_BLOCK		0xc970
+#define APLL_LOCK		0x14000
+#define APLL_CON0		0x14100
+#define SRC_CPU			0x14200
+#define DIV_CPU0		0x14500
+#define DIV_CPU1		0x14504
+
+/* list of PLLs to be registered */
+enum exynos3250_plls {
+	apll, mpll, vpll, upll,
+	nr_plls
+};
+
+void __iomem *reg_base;

static void

+
+/*
+ * Support for CMU save/restore across system suspends
+ */
+#ifdef CONFIG_PM_SLEEP
+static struct samsung_clk_reg_dump *exynos3250_clk_regs;
+
+static unsigned long exynos3250_cmu_clk_regs[] __initdata = {
+	SRC_LEFTBUS,
+	DIV_LEFTBUS,
+	GATE_IP_LEFTBUS,
+	SRC_RIGHTBUS,
+	DIV_RIGHTBUS,
+	GATE_IP_RIGHTBUS,
+	GATE_IP_PERIR,
+	MPLL_LOCK,
+	MPLL_CON0,
+	VPLL_LOCK,
+	VPLL_CON0,
+	UPLL_LOCK,
+	UPLL_CON0,
+	SRC_TOP0,
+	SRC_TOP1,
+	SRC_CAM,
+	SRC_MFC,
+	SRC_G3D,
+	SRC_LCD,
+	SRC_ISP,
+	SRC_FSYS,
+	SRC_PERIL0,
+	SRC_PERIL1,
+	SRC_MASK_TOP,
+	SRC_MASK_CAM,
+	SRC_MASK_LCD,
+	SRC_MASK_ISP,
+	SRC_MASK_FSYS,
+	SRC_MASK_PERIL0,
+	SRC_MASK_PERIL1,
+	DIV_TOP,
+	DIV_CAM,
+	DIV_MFC,
+	DIV_G3D,
+	DIV_LCD,
+	DIV_ISP,
+	DIV_FSYS0,
+	DIV_FSYS1,
+	DIV_FSYS2,
+	DIV_PERIL0,
+	DIV_PERIL1,
+	DIV_PERIL3,
+	DIV_PERIL4,
+	DIV_PERIL5,
+	DIV_CAM1,
+	CLKDIV2_RATIO,
+	GATE_SCLK_CAM,
+	GATE_SCLK_MFC,
+	GATE_SCLK_G3D,
+	GATE_SCLK_LCD,
+	GATE_SCLK_ISP_TOP,
+	GATE_SCLK_FSYS,
+	GATE_SCLK_PERIL,
+	GATE_IP_CAM,
+	GATE_IP_MFC,
+	GATE_IP_G3D,
+	GATE_IP_LCD,
+	GATE_IP_ISP,
+	GATE_IP_FSYS,
+	GATE_IP_PERIL,
+	GATE_BLOCK,
+	APLL_LOCK,
+	SRC_CPU,
+	DIV_CPU0,
+	DIV_CPU1,
+};
+
+static int exynos3250_clk_suspend(void)
+{
+	samsung_clk_save(reg_base, exynos3250_clk_regs,
+				ARRAY_SIZE(exynos3250_cmu_clk_regs));
+	return 0;
+}
+
+static void exynos3250_clk_resume(void)
+{
+	samsung_clk_restore(reg_base, exynos3250_clk_regs,
+				ARRAY_SIZE(exynos3250_cmu_clk_regs));
+}
+
+static struct syscore_ops exynos3250_clk_syscore_ops = {
+	.suspend = exynos3250_clk_suspend,
+	.resume = exynos3250_clk_resume,
+};
+
+static void exynos3250_clk_sleep_init(void)
+{
+	exynos3250_clk_regs =
+		samsung_clk_alloc_reg_dump(exynos3250_cmu_clk_regs,
+					   ARRAY_SIZE(exynos3250_cmu_clk_regs));
+	if (!exynos3250_clk_regs) {
+		pr_warn("%s: Failed to allocate sleep save data\n", __func__);
+		goto err;
+	}
+
+	register_syscore_ops(&exynos3250_clk_syscore_ops);
+	return;
+err:
+	kfree(exynos3250_clk_regs);
+}
+#else
+static inline void exynos3250_clk_sleep_init(void) { }
+#endif
+
+/* list of all parent clock list */
+PNAME(mout_vpllsrc_p)		= { "fin_pll", };
+
+PNAME(mout_apll_p)		= { "fin_pll", "fout_apll", };
+PNAME(mout_mpll_p)		= { "fin_pll", "fout_mpll", };
+PNAME(mout_vpll_p)		= { "fin_pll", "fout_vpll", };
+PNAME(mout_upll_p)		= { "fin_pll", "fout_upll", };
+
+PNAME(mout_mpll_user_p)		= { "fin_pll", "div_mpll_pre", };
+PNAME(mout_epll_user_p)		= { "fin_pll", "mout_epll", };
+PNAME(mout_core_p)		= { "mout_apll", "mout_mpll_user_c", };
+PNAME(mout_hpm_p)		= { "mout_apll", "mout_mpll_user_c", };
+
+PNAME(mout_ebi_p)		= { "div_aclk_200", "div_aclk_160", };
+PNAME(mout_ebi_1_p)		= { "mout_ebi", "mout_vpll", };
+
+PNAME(mout_gdl_p)		= { "mout_mpll_user_l", };
+PNAME(mout_gdr_p)		= { "mout_mpll_user_r", };
+
+PNAME(mout_aclk_400_mcuisp_sub_p)
+				= { "fin_pll", "div_aclk_400_mcuisp", };
+PNAME(mout_aclk_266_0_p)	= { "div_mpll_pre", "mout_vpll", };
+PNAME(mout_aclk_266_1_p)	= { "mout_epll_user", };
+PNAME(mout_aclk_266_p)		= { "mout_aclk_266_0", "mout_aclk_266_1", };
+PNAME(mout_aclk_266_sub_p)	= { "fin_pll", "div_aclk_266", };
+
+PNAME(group_div_mpll_pre_p)	= { "div_mpll_pre", };
+PNAME(group_epll_vpll_p)	= { "mout_epll_user", "mout_vpll" };
+PNAME(group_sclk_p)		= { "xxti", "xusbxti",
+				    "none", "none",
+				    "none", "none", "div_mpll_pre",
+				    "mout_epll_user", "mout_vpll", };
+PNAME(group_sclk_audio_p)	= { "audiocdclk", "none",
+				    "none", "none",
+				    "xxti", "xusbxti",
+				    "div_mpll_pre", "mout_epll_user",
+				    "mout_vpll", };
+PNAME(group_sclk_cam_blk_p)	= { "xxti", "xusbxti",
+				    "none", "none", "none",
+				    "none", "div_mpll_pre",
+				    "mout_epll_user", "mout_vpll",
+				    "div_cam_blk_320", };
+PNAME(group_sclk_fimd0_p)	= { "xxti", "xusbxti",
+				    "m_bitclkhsdiv4_2l", "none",
+				    "none", "none", "div_mpll_pre",
+				    "mout_epll_user", "mout_vpll",
+				    "none", "none", "none",
+				    "div_lcd_blk_145", };
+
+PNAME(mout_mfc_p)		= { "mout_mfc_0", "mout_mfc_1" };
+PNAME(mout_g3d_p)		= { "mout_g3d_0", "mout_g3d_1" };
+
+static struct samsung_fixed_rate_clock fixed_rate_clks[] __initdata = {
+};

Any reason to have this empty array at all?

+
+static struct samsung_fixed_factor_clock fixed_factor_clks[] __initdata = {
+	FFACTOR(0, "sclk_mpll_1600", "mout_mpll", 1, 1, 0),
+	FFACTOR(0, "sclk_mpll_mif", "mout_mpll", 1, 2, 0),
+	FFACTOR(0, "sclk_bpll", "fout_bpll", 1, 2, 0),
+	FFACTOR(0, "div_cam_blk_320", "sclk_mpll_1600", 1, 5, 0),
+	FFACTOR(0, "div_lcd_blk_145", "sclk_mpll_1600", 1, 11, 0),
+
+	FFACTOR(CLK_FIN_PLL, "fin_pll", "xusbxti", 1, 1, 0),

This is a hack. The real "fin_pll" is a mux driven by XOM pin which selects which clock input is used as main system oscillator. It should be implemented properly in this driver or at least appropriate comment should be added stressing the fact that it is a hack.

+};
+
+static struct samsung_mux_clock mux_clks[] __initdata = {
+	/*
+	 * NOTE: Following table is sorted by register address in ascending
+	 * order and then bitfield shift in descending order, as it is done
+	 * in the User's Manual. When adding new entries, please make sure
+	 * that the order is preserved, to avoid merge conflicts and make
+	 * further work with defined data easier.
+	 */
+
+	/* SRC_LEFTBUS */
+	MUX(CLK_MOUT_MPLL_USER_L, "mout_mpll_user_l", mout_mpll_user_p,
+	    SRC_LEFTBUS, 4, 1),
+	MUX(CLK_MOUT_GDL, "mout_gdl", mout_gdl_p, SRC_LEFTBUS, 0, 1),
+
+	/* SRC_RIGHTBUS */
+	MUX(CLK_MOUT_MPLL_USER_R, "mout_mpll_user_r", mout_mpll_user_p,
+	    SRC_RIGHTBUS, 4, 1),
+	MUX(CLK_MOUT_GDR, "mout_gdr", mout_gdr_p, SRC_RIGHTBUS, 0, 1),
+
+	/* SRC_TOP0 */
+	MUX(CLK_MOUT_EBI, "mout_ebi", mout_ebi_p, SRC_TOP0, 28, 1),
+	MUX(CLK_MOUT_ACLK_200, "mout_aclk_200", group_div_mpll_pre_p,SRC_TOP0, 24, 1),
+	MUX(CLK_MOUT_ACLK_160, "mout_aclk_160", group_div_mpll_pre_p, SRC_TOP0, 20, 1),
+	MUX(CLK_MOUT_ACLK_100, "mout_aclk_100", group_div_mpll_pre_p, SRC_TOP0, 16, 1),
+	MUX(CLK_MOUT_ACLK_266_1, "mout_aclk_266_1", mout_aclk_266_1_p, SRC_TOP0, 14, 1),
+	MUX(CLK_MOUT_ACLK_266_0, "mout_aclk_266_0", mout_aclk_266_0_p, SRC_TOP0, 13, 1),
+	MUX(CLK_MOUT_ACLK_266, "mout_aclk_266", mout_aclk_266_p, SRC_TOP0, 12, 1),
+	MUX(CLK_MOUT_VPLL, "mout_vpll", mout_vpll_p, SRC_TOP0, 8, 1),
+	MUX(CLK_MOUT_EPLL_USER, "mout_epll_user", mout_epll_user_p, SRC_TOP0, 4, 1),
+	MUX(CLK_MOUT_EBI_1, "mout_ebi_1", mout_ebi_1_p, SRC_TOP0, 0, 1),
+
+	/* SRC_TOP1 */
+	MUX(CLK_MOUT_UPLL, "mout_upll", mout_upll_p, SRC_TOP1, 28, 1),
+	MUX(CLK_MOUT_ACLK_400_MCUISP_SUB, "mout_aclk_400_mcuisp_sub", mout_aclk_400_mcuisp_sub_p,
+		SRC_TOP1, 24, 1),
+	MUX(CLK_MOUT_ACLK_266_SUB, "mout_aclk_266_sub", mout_aclk_266_sub_p, SRC_TOP1, 20, 1),
+	MUX(CLK_MOUT_MPLL, "mout_mpll", mout_mpll_p, SRC_TOP1, 12, 1),
+	MUX(CLK_MOUT_ACLK_400_MCUISP, "mout_aclk_400_mcuisp", group_div_mpll_pre_p, SRC_TOP1, 8, 1),
+	MUX(CLK_MOUT_VPLLSRC, "mout_vpllsrc", mout_vpllsrc_p, SRC_TOP1, 0, 1),
+
+	/* SRC_CAM */
+	MUX(CLK_MOUT_CAM1, "mout_cam1", group_sclk_p, SRC_CAM, 20, 4),
+	MUX(CLK_MOUT_CAM_BLK, "mout_cam_blk", group_sclk_cam_blk_p, SRC_CAM, 0, 4),
+
+	/* SRC_MFC */
+	MUX(CLK_MOUT_MFC, "mout_mfc", mout_mfc_p, SRC_MFC, 8, 1),
+	MUX(CLK_MOUT_MFC_1, "mout_mfc_1", group_epll_vpll_p, SRC_MFC, 4, 1),
+	MUX(CLK_MOUT_MFC_0, "mout_mfc_0", group_div_mpll_pre_p, SRC_MFC, 0, 1),
+
+	/* SRC_G3D */
+	MUX(CLK_MOUT_G3D, "mout_g3d", mout_g3d_p, SRC_G3D, 8, 1),
+	MUX(CLK_MOUT_G3D_1, "mout_g3d_1", group_epll_vpll_p, SRC_G3D, 4, 1),
+	MUX(CLK_MOUT_G3D_0, "mout_g3d_0", group_div_mpll_pre_p, SRC_G3D, 0, 1),
+
+	/* SRC_LCD */
+	MUX(CLK_MOUT_MIPI0, "mout_mipi0", group_sclk_p, SRC_LCD, 12, 4),
+	MUX(CLK_MOUT_FIMD0, "mout_fimd0", group_sclk_fimd0_p, SRC_LCD, 0, 4),
+
+	/* SRC_ISP */
+	MUX(CLK_MOUT_UART_ISP, "mout_uart_isp", group_sclk_p, SRC_ISP, 12, 4),
+	MUX(CLK_MOUT_SPI1_ISP, "mout_spi1_isp", group_sclk_p, SRC_ISP, 8, 4),
+	MUX(CLK_MOUT_SPI0_ISP, "mout_spi0_isp", group_sclk_p, SRC_ISP, 4, 4),
+
+	/* SRC_FSYS */
+	MUX(CLK_MOUT_TSADC, "mout_tsadc", group_sclk_p, SRC_FSYS, 28, 4),
+	MUX(CLK_MOUT_MMC1, "mout_mmc1", group_sclk_p, SRC_FSYS, 4, 3),
+	MUX(CLK_MOUT_MMC0, "mout_mmc0", group_sclk_p, SRC_FSYS, 0, 3),
+
+	/* SRC_PERIL0 */
+	MUX(CLK_MOUT_UART1, "mout_uart1", group_sclk_p, SRC_PERIL0, 4, 4),
+	MUX(CLK_MOUT_UART0, "mout_uart0", group_sclk_p, SRC_PERIL0, 0, 4),
+
+	/* SRC_PERIL1 */
+	MUX(CLK_MOUT_SPI1, "mout_spi1", group_sclk_p, SRC_PERIL1, 20, 4),
+	MUX(CLK_MOUT_SPI0, "mout_spi0", group_sclk_p, SRC_PERIL1, 16, 4),
+	MUX(CLK_MOUT_AUDIO, "mout_audio", group_sclk_audio_p, SRC_PERIL1, 4, 4),
+
+	/* SRC_CPU */
+	MUX(CLK_MOUT_MPLL_USER_C, "mout_mpll_user_c", mout_mpll_user_p,
+	    SRC_CPU, 24, 1),
+	MUX(CLK_MOUT_HPM, "mout_hpm", mout_hpm_p, SRC_CPU, 20, 1),
+	MUX(CLK_MOUT_CORE, "mout_core", mout_core_p, SRC_CPU, 16, 1),
+	MUX(CLK_MOUT_APLL, "mout_apll", mout_apll_p, SRC_CPU, 0, 1),
+};
+
+static struct samsung_div_clock div_clks[] __initdata = {
+	/*
+	 * NOTE: Following table is sorted by register address in ascending
+	 * order and then bitfield shift in descending order, as it is done
+	 * in the User's Manual. When adding new entries, please make sure
+	 * that the order is preserved, to avoid merge conflicts and make
+	 * further work with defined data easier.
+	 */
+
+	/* DIV_LEFTBUS */
+	DIV(CLK_DIV_GPL, "div_gpl", "div_gdl", DIV_LEFTBUS, 4, 3),
+	DIV(CLK_DIV_GDL, "div_gdl", "mout_gdl", DIV_LEFTBUS, 0, 4),
+
+	/* DIV_RIGHTBUS */
+	DIV(CLK_DIV_GPR, "div_gpr", "div_gdr", DIV_RIGHTBUS, 4, 3),
+	DIV(CLK_DIV_GDR, "div_gdr", "mout_gdr", DIV_RIGHTBUS, 0, 4),
+
+	/* DIV_TOP */
+	DIV(CLK_DIV_MPLL_PRE, "div_mpll_pre", "sclk_mpll_mif", DIV_TOP, 28, 2),
+	DIV(CLK_DIV_ACLK_400_MCUISP, "div_aclk_400_mcuisp",
+	    "mout_aclk_400_mcuisp", DIV_TOP, 24, 3),
+	DIV(CLK_DIV_EBI, "div_ebi", "mout_ebi_1", DIV_TOP, 16, 3),
+	DIV(CLK_DIV_ACLK_200, "div_aclk_200", "mout_aclk_200", DIV_TOP, 12, 3),
+	DIV(CLK_DIV_ACLK_160, "div_aclk_160", "mout_aclk_160", DIV_TOP, 8, 3),
+	DIV(CLK_DIV_ACLK_100, "div_aclk_100", "mout_aclk_100", DIV_TOP, 4, 4),
+	DIV(CLK_DIV_ACLK_266, "div_aclk_266", "mout_aclk_266", DIV_TOP, 0, 3),
+
+	/* DIV_CAM */
+	DIV(CLK_DIV_CAM1, "div_cam1", "mout_cam1", DIV_CAM, 20, 4),
+	DIV(CLK_DIV_CAM_BLK, "div_cam_blk", "mout_cam_blk", DIV_CAM, 0, 4),
+
+	/* DIV_MFC */
+	DIV(CLK_DIV_MFC, "div_mfc", "mout_mfc", DIV_MFC, 0, 4),
+
+	/* DIV_G3D */
+	DIV(CLK_DIV_G3D, "div_g3d", "mout_g3d", DIV_G3D, 0, 4),
+
+	/* DIV_LCD */
+	DIV_F(CLK_DIV_MIPI0_PRE, "div_mipi0_pre", "div_mipi0", DIV_LCD, 20, 4,
+		CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_MIPI0, "div_mipi0", "mout_mipi0", DIV_LCD, 16, 4),
+	DIV(CLK_DIV_FIMD0, "div_fimd0", "mout_fimd0", DIV_LCD, 0, 4),
+
+	/* DIV_ISP */
+	DIV(CLK_DIV_UART_ISP, "div_uart_isp", "mout_uart_isp", DIV_ISP, 28, 4),
+	DIV_F(CLK_DIV_SPI1_ISP_PRE, "div_spi1_isp_pre", "div_spi1_isp",
+		DIV_ISP, 20, 8, CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_SPI1_ISP, "div_spi1_isp", "mout_spi1_isp", DIV_ISP, 16, 4),
+	DIV_F(CLK_DIV_SPI0_ISP_PRE, "div_spi0_isp_pre", "div_spi0_isp",
+		DIV_ISP, 8, 8, CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_SPI0_ISP, "div_spi0_isp", "mout_spi0_isp", DIV_ISP, 0, 4),
+
+	/* DIV_FSYS0 */
+	DIV_F(CLK_DIV_TSADC_PRE, "div_tsadc_pre", "div_tsadc", DIV_FSYS0, 8, 8,
+		CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_TSADC, "div_tsadc", "mout_tsadc", DIV_FSYS0, 0, 4),
+
+	/* DIV_FSYS1 */
+	DIV_F(CLK_DIV_MMC1_PRE, "div_mmc1_pre", "div_mmc1", DIV_FSYS1, 24, 8,
+		CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_MMC1, "div_mmc1", "mout_mmc1", DIV_FSYS1, 16, 4),
+	DIV_F(CLK_DIV_MMC0_PRE, "div_mmc0_pre", "div_mmc0", DIV_FSYS1, 8, 8,
+		CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_MMC0, "div_mmc0", "mout_mmc0", DIV_FSYS1, 0, 4),
+
+	/* DIV_PERIL0 */
+	DIV(CLK_DIV_UART1, "div_uart1", "mout_uart1", DIV_PERIL0, 4, 4),
+	DIV(CLK_DIV_UART0, "div_uart0", "mout_uart0", DIV_PERIL0, 0, 4),
+
+	/* DIV_PERIL1 */
+	DIV_F(CLK_DIV_SPI1_PRE, "div_spi1_pre", "div_spi1", DIV_PERIL1, 24, 8,
+		CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_SPI1, "div_spi1", "mout_spi1", DIV_PERIL1, 16, 4),
+	DIV_F(CLK_DIV_SPI0_PRE, "div_spi0_pre", "div_spi0", DIV_PERIL1, 8, 8,
+		CLK_SET_RATE_PARENT, 0),
+	DIV(CLK_DIV_SPI0, "div_spi0", "mout_spi0", DIV_PERIL1, 0, 4),
+
+	/* DIV_PERIL4 */
+	DIV(CLK_DIV_PCM, "div_pcm", "div_audio", DIV_PERIL4, 20, 8),
+	DIV(CLK_DIV_AUDIO, "div_audio", "mout_audio", DIV_PERIL4, 16, 4),
+
+	/* DIV_PERIL5 */
+	DIV(CLK_DIV_I2S, "div_i2s", "div_audio", DIV_PERIL5, 8, 6),
+
+	/* DIV_CPU0 */
+	DIV(CLK_DIV_CORE2, "div_core2", "div_core", DIV_CPU0, 28, 3),
+	DIV(CLK_DIV_APLL, "div_apll", "mout_apll", DIV_CPU0, 24, 3),
+	DIV(CLK_DIV_PCLK_DBG, "div_pclk_dbg", "div_core2", DIV_CPU0, 20, 3),
+	DIV(CLK_DIV_ATB, "div_atb", "div_core2", DIV_CPU0, 16, 3),
+	DIV(CLK_DIV_COREM, "div_corem", "div_core2", DIV_CPU0, 4, 3),
+	DIV(CLK_DIV_CORE, "div_core", "mout_core", DIV_CPU0, 0, 3),
+
+	/* DIV_CPU1 */
+	DIV(CLK_DIV_HPM, "div_hpm", "div_copy", DIV_CPU1, 4, 3),
+	DIV(CLK_DIV_COPY, "div_copy", "mout_hpm", DIV_CPU1, 0, 3),
+};
+
+static struct samsung_gate_clock gate_clks[] __initdata = {
+	/*
+	 * NOTE: Following table is sorted by register address in ascending
+	 * order and then bitfield shift in descending order, as it is done
+	 * in the User's Manual. When adding new entries, please make sure
+	 * that the order is preserved, to avoid merge conflicts and make
+	 * further work with defined data easier.
+	 */
+
+	/* GATE_IP_LEFTBUS */
+	GATE(CLK_ASYNC_G3D, "async_g3d", "div_aclk_100", GATE_IP_LEFTBUS, 6,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_ASYNC_MFCL, "async_mfcl", "div_aclk_100", GATE_IP_LEFTBUS, 4,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PPMULEFT, "ppmuleft", "div_aclk_100", GATE_IP_LEFTBUS, 1,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_GPIO_LEFT, "gpio_left", "div_aclk_100", GATE_IP_LEFTBUS, 0,
+		CLK_IGNORE_UNUSED, 0),
+
+	/* GATE_IP_RIGHTBUS */
+	GATE(CLK_ASYNC_ISPMX, "async_ispmx", "div_aclk_100",
+		GATE_IP_RIGHTBUS, 9, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_ASYNC_FSYSD, "async_fsysd", "div_aclk_100",
+		GATE_IP_RIGHTBUS, 5, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_ASYNC_LCD0X, "async_lcd0x", "div_aclk_100",
+		GATE_IP_RIGHTBUS, 3, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_ASYNC_CAMX, "async_camx", "div_aclk_100", GATE_IP_RIGHTBUS, 2,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PPMURIGHT, "ppmuright", "div_aclk_100", GATE_IP_RIGHTBUS, 1,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_GPIO_RIGHT, "gpio_right", "div_aclk_100", GATE_IP_RIGHTBUS, 0,
+		CLK_IGNORE_UNUSED, 0),
+
+	/* GATE_IP_PERIR */
+	GATE(CLK_MONOCNT, "monocnt", "div_aclk_100", GATE_IP_PERIR, 22,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC6, "tzpc6", "div_aclk_100", GATE_IP_PERIR, 21,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PROVISIONKEY1, "provisionkey1", "div_aclk_100",
+		GATE_IP_PERIR, 20, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PROVISIONKEY0, "provisionkey0", "div_aclk_100",
+		GATE_IP_PERIR, 19, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_CMU_ISPPART, "cmu_isppart", "div_aclk_100", GATE_IP_PERIR, 18,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TMU_APBIF, "tmu_apbif", "div_aclk_100",
+		GATE_IP_PERIR, 17, 0, 0),
+	GATE(CLK_KEYIF, "keyif", "div_aclk_100", GATE_IP_PERIR, 16, 0, 0),
+	GATE(CLK_RTC, "rtc", "div_aclk_100", GATE_IP_PERIR, 15, 0, 0),
+	GATE(CLK_WDT, "wdt", "div_aclk_100", GATE_IP_PERIR, 14, 0, 0),
+	GATE(CLK_MCT, "mct", "div_aclk_100", GATE_IP_PERIR, 13, 0, 0),
+	GATE(CLK_SECKEY, "seckey", "div_aclk_100", GATE_IP_PERIR, 12,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC5, "tzpc5", "div_aclk_100", GATE_IP_PERIR, 10,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC4, "tzpc4", "div_aclk_100", GATE_IP_PERIR, 9,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC3, "tzpc3", "div_aclk_100", GATE_IP_PERIR, 8,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC2, "tzpc2", "div_aclk_100", GATE_IP_PERIR, 7,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC1, "tzpc1", "div_aclk_100", GATE_IP_PERIR, 6,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_TZPC0, "tzpc0", "div_aclk_100", GATE_IP_PERIR, 5,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_CMU_COREPART, "cmu_corepart", "div_aclk_100", GATE_IP_PERIR, 4,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_CMU_TOPPART, "cmu_toppart", "div_aclk_100", GATE_IP_PERIR, 3,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PMU_APBIF, "pmu_apbif", "div_aclk_100", GATE_IP_PERIR, 2,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_SYSREG, "sysreg", "div_aclk_100", GATE_IP_PERIR, 1,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_CHIP_ID, "chip_id", "div_aclk_100", GATE_IP_PERIR, 0,
+		CLK_IGNORE_UNUSED, 0),
+
+	/* GATE_SCLK_CAM */
+	GATE(CLK_SCLK_JPEG, "sclk_jpeg", "div_cam_blk",
+		GATE_SCLK_CAM, 8, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_M2MSCALER, "sclk_m2mscaler", "div_cam_blk",
+		GATE_SCLK_CAM, 2, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_GSCALER1, "sclk_gscaler1", "div_cam_blk",
+		GATE_SCLK_CAM, 1, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_GSCALER0, "sclk_gscaler0", "div_cam_blk",
+		GATE_SCLK_CAM, 0, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_SCLK_MFC */
+	GATE(CLK_SCLK_MFC, "sclk_mfc", "div_mfc",
+		GATE_SCLK_MFC, 0, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_SCLK_G3D */
+	GATE(CLK_SCLK_G3D, "sclk_g3d", "div_g3d",
+		GATE_SCLK_G3D, 0, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_SCLK_LCD */
+	GATE(CLK_SCLK_MIPIDPHY2L, "sclk_mipidphy2l", "div_mipi0",
+		GATE_SCLK_LCD, 4, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_MIPI0, "sclk_mipi0", "div_mipi0_pre",
+		GATE_SCLK_LCD, 3, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_FIMD0, "sclk_fimd0", "div_fimd0",
+		GATE_SCLK_LCD, 0, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_SCLK_ISP_TOP */
+	GATE(CLK_SCLK_CAM1, "sclk_cam1", "div_cam1",
+		GATE_SCLK_ISP_TOP, 4, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_UART_ISP, "sclk_uart_isp", "div_uart_isp",
+		GATE_SCLK_ISP_TOP, 3, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_SPI1_ISP, "sclk_spi1_isp", "div_spi1_isp",
+		GATE_SCLK_ISP_TOP, 2, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_SPI0_ISP, "sclk_spi0_isp", "div_spi0_isp",
+		GATE_SCLK_ISP_TOP, 1, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_SCLK_FSYS */
+	GATE(CLK_SCLK_UPLL, "sclk_upll", "mout_upll", GATE_SCLK_FSYS, 10, 0, 0),
+	GATE(CLK_SCLK_TSADC, "sclk_tsadc", "div_tsadc_pre",
+		GATE_SCLK_FSYS, 9, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_EBI, "sclk_ebi", "div_ebi",
+		GATE_SCLK_FSYS, 6, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_MMC1, "sclk_mmc1", "div_mmc1_pre",
+		GATE_SCLK_FSYS, 1, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_MMC0, "sclk_mmc0", "div_mmc0_pre",
+		GATE_SCLK_FSYS, 0, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_SCLK_PERIL */
+	GATE(CLK_SCLK_I2S, "sclk_i2s", "div_i2s",
+		GATE_SCLK_PERIL, 18, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_PCM, "sclk_pcm", "div_pcm",
+		GATE_SCLK_PERIL, 16, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_SPI1, "sclk_spi1", "div_spi1_pre",
+		GATE_SCLK_PERIL, 7, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_SPI0, "sclk_spi0", "div_spi0_pre",
+		GATE_SCLK_PERIL, 6, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_UART1, "sclk_uart1", "div_uart1",
+		GATE_SCLK_PERIL, 1, CLK_SET_RATE_PARENT, 0),
+	GATE(CLK_SCLK_UART0, "sclk_uart0", "div_uart0",
+		GATE_SCLK_PERIL, 0, CLK_SET_RATE_PARENT, 0),
+
+	/* GATE_IP_CAM */
+	GATE(CLK_QEJPEG, "qejpeg", "div_cam_blk_320", GATE_IP_CAM, 19,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PIXELASYNCM1, "pixelasyncm1", "div_cam_blk_320",
+		GATE_IP_CAM, 18, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PIXELASYNCM0, "pixelasyncm0", "div_cam_blk_320",
+		GATE_IP_CAM, 17, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PPMUCAMIF, "ppmucamif", "div_cam_blk_320",
+		GATE_IP_CAM, 16, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_QEM2MSCALER, "qem2mscaler", "div_cam_blk_320",
+		GATE_IP_CAM, 14, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_QEGSCALER1, "qegscaler1", "div_cam_blk_320",
+		GATE_IP_CAM, 13, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_QEGSCALER0, "qegscaler0", "div_cam_blk_320",
+		GATE_IP_CAM, 12, CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_SMMUJPEG, "smmujpeg", "div_cam_blk_320",
+		GATE_IP_CAM, 11, 0, 0),
+	GATE(CLK_SMMUM2M2SCALER, "smmum2m2scaler", "div_cam_blk_320",
+		GATE_IP_CAM, 9, 0, 0),
+	GATE(CLK_SMMUGSCALER1, "smmugscaler1", "div_cam_blk_320",
+		GATE_IP_CAM, 8, 0, 0),
+	GATE(CLK_SMMUGSCALER0, "smmugscaler0", "div_cam_blk_320",
+		GATE_IP_CAM, 7, 0, 0),
+	GATE(CLK_JPEG, "jpeg", "div_cam_blk_320", GATE_IP_CAM, 6, 0, 0),
+	GATE(CLK_M2MSCALER, "m2mscaler", "div_cam_blk_320",
+		GATE_IP_CAM, 2, 0, 0),
+	GATE(CLK_GSCALER1, "gscaler1", "div_cam_blk_320", GATE_IP_CAM, 1, 0, 0),
+	GATE(CLK_GSCALER0, "gscaler0", "div_cam_blk_320", GATE_IP_CAM, 0, 0, 0),
+
+	/* GATE_IP_MFC */
+	GATE(CLK_QEMFC, "qemfc", "div_aclk_200", GATE_IP_MFC, 5,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PPMUMFC_L, "ppmumfc_l", "div_aclk_200", GATE_IP_MFC, 3,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_SMMUMFC_L, "smmumfc_l", "div_aclk_200", GATE_IP_MFC, 1, 0, 0),
+	GATE(CLK_MFC, "mfc", "div_aclk_200", GATE_IP_MFC, 0, 0, 0),
+
+	/* GATE_IP_G3D */
+	GATE(CLK_SMMUG3D, "smmug3d", "div_aclk_200", GATE_IP_G3D, 3, 0, 0),
+	GATE(CLK_QEG3D, "qeg3d", "div_aclk_200", GATE_IP_G3D, 2,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PPMUG3D, "ppmug3d", "div_aclk_200", GATE_IP_G3D, 1,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_G3D, "g3d", "div_aclk_200", GATE_IP_G3D, 0, 0, 0),
+
+	/* GATE_IP_LCD */
+	GATE(CLK_QE_CH1_LCD, "qe_ch1_lcd", "div_aclk_160", GATE_IP_LCD, 7,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_QE_CH0_LCD, "qe_ch0_lcd", "div_aclk_160", GATE_IP_LCD, 6,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_PPMULCD0, "ppmulcd0", "div_aclk_160", GATE_IP_LCD, 5,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_SMMUFIMD0, "smmufimd0", "div_aclk_160", GATE_IP_LCD, 4, 0, 0),
+	GATE(CLK_DSIM0, "dsim0", "div_aclk_160", GATE_IP_LCD, 3, 0, 0),
+	GATE(CLK_SMIES, "smies", "div_aclk_160", GATE_IP_LCD, 2, 0, 0),
+	GATE(CLK_FIMD0, "fimd0", "div_aclk_160", GATE_IP_LCD, 0, 0, 0),
+
+	/* GATE_IP_ISP */
+	GATE(CLK_CAM1, "cam1", "mout_aclk_266_sub", GATE_IP_ISP, 5, 0, 0),
+	GATE(CLK_UART_ISP_TOP, "uart_isp_top", "mout_aclk_266_sub",
+		GATE_IP_ISP, 3, 0, 0),
+	GATE(CLK_SPI1_ISP_TOP, "spi1_isp_top", "mout_aclk_266_sub",
+		GATE_IP_ISP, 2, 0, 0),
+	GATE(CLK_SPI0_ISP_TOP, "spi0_isp_top", "mout_aclk_266_sub",
+		GATE_IP_ISP, 1, 0, 0),
+
+	/* GATE_IP_FSYS */
+	GATE(CLK_TSADC, "tsadc", "div_aclk_200", GATE_IP_FSYS, 20, 0, 0),
+	GATE(CLK_PPMUFILE, "ppmufile", "div_aclk_200", GATE_IP_FSYS, 17,
+		CLK_IGNORE_UNUSED, 0),
+	GATE(CLK_USBOTG, "usbotg", "div_aclk_200", GATE_IP_FSYS, 13, 0, 0),
+	GATE(CLK_USBHOST, "usbhost", "div_aclk_200", GATE_IP_FSYS, 12, 0, 0),
+	GATE(CLK_SROMC, "sromc", "div_aclk_200", GATE_IP_FSYS, 11, 0, 0),
+	GATE(CLK_SDMMC1, "sdmmc1", "div_aclk_200", GATE_IP_FSYS, 6, 0, 0),
+	GATE(CLK_SDMMC0, "sdmmc0", "div_aclk_200", GATE_IP_FSYS, 5, 0, 0),
+	GATE(CLK_PDMA1, "pdma1", "div_aclk_200", GATE_IP_FSYS, 1, 0, 0),
+	GATE(CLK_PDMA0, "pdma0", "div_aclk_200", GATE_IP_FSYS, 0, 0, 0),
+
+	/* GATE_IP_PERIL */
+	GATE(CLK_PWM, "pwm", "div_aclk_100", GATE_IP_PERIL, 24, 0, 0),
+	GATE(CLK_PCM, "pcm", "div_aclk_100", GATE_IP_PERIL, 23, 0, 0),
+	GATE(CLK_I2S, "i2s", "div_aclk_100", GATE_IP_PERIL, 21, 0, 0),
+	GATE(CLK_SPI1, "spi1", "div_aclk_100", GATE_IP_PERIL, 17, 0, 0),
+	GATE(CLK_SPI0, "spi0", "div_aclk_100", GATE_IP_PERIL, 16, 0, 0),
+	GATE(CLK_I2C7, "i2c7", "div_aclk_100", GATE_IP_PERIL, 13, 0, 0),
+	GATE(CLK_I2C6, "i2c6", "div_aclk_100", GATE_IP_PERIL, 12, 0, 0),
+	GATE(CLK_I2C5, "i2c5", "div_aclk_100", GATE_IP_PERIL, 11, 0, 0),
+	GATE(CLK_I2C4, "i2c4", "div_aclk_100", GATE_IP_PERIL, 10, 0, 0),
+	GATE(CLK_I2C3, "i2c3", "div_aclk_100", GATE_IP_PERIL, 9, 0, 0),
+	GATE(CLK_I2C2, "i2c2", "div_aclk_100", GATE_IP_PERIL, 8, 0, 0),
+	GATE(CLK_I2C1, "i2c1", "div_aclk_100", GATE_IP_PERIL, 7, 0, 0),
+	GATE(CLK_I2C0, "i2c0", "div_aclk_100", GATE_IP_PERIL, 6, 0, 0),
+	GATE(CLK_UART1, "uart1", "div_aclk_100", GATE_IP_PERIL, 1, 0, 0),
+	GATE(CLK_UART0, "uart0", "div_aclk_100", GATE_IP_PERIL, 0, 0, 0),
+
+	/* GATE_BLOCK */
+	GATE(CLK_BLOCK_LCD, "block_lcd", "div_aclk_160", GATE_BLOCK, 4, 0, 0),
+	GATE(CLK_BLOCK_G3D, "block_g3d", "div_aclk_200", GATE_BLOCK, 3, 0, 0),

Are there only 2 gate block clocks? By the way, how are they going to be handled by respective drivers? There is no mainline support for them right now, but you should be aware that adding them will cause common clock framework to disable them if not claimed by any driver.

+};
+
+/* APLL & MPLL & BPLL & UPLL */
+static struct samsung_pll_rate_table exynos3250_pll_rates[] = {
+	PLL_35XX_RATE(1200000000, 400, 4, 1),
+	PLL_35XX_RATE(1100000000, 275, 3, 1),
+	PLL_35XX_RATE(1066000000, 533, 6, 1),
+	PLL_35XX_RATE(1000000000, 250, 3, 1),
+	PLL_35XX_RATE( 960000000, 320, 4, 1),
+	PLL_35XX_RATE( 900000000, 300, 4, 1),
+	PLL_35XX_RATE( 850000000, 425, 6, 1),
+	PLL_35XX_RATE( 800000000, 200, 3, 1),
+	PLL_35XX_RATE( 700000000, 175, 3, 1),
+	PLL_35XX_RATE( 667000000, 667, 12, 1),
+	PLL_35XX_RATE( 600000000, 400, 4, 2),
+	PLL_35XX_RATE( 533000000, 533, 6, 2),
+	PLL_35XX_RATE( 520000000, 260, 3, 2),
+	PLL_35XX_RATE( 500000000, 250, 3, 2),
+	PLL_35XX_RATE( 400000000, 200, 3, 2),
+	PLL_35XX_RATE( 200000000, 200, 3, 3),
+	PLL_35XX_RATE( 100000000, 200, 3, 4),
+	{ /* sentinel */ }
+};
+
+/* VPLL */
+static struct samsung_pll_rate_table exynos3250_vpll_rates[] = {
+	PLL_36XX_RATE(600000000, 100, 2, 1,     0),
+	PLL_36XX_RATE(533000000, 267, 3, 2, 32668),
+	PLL_36XX_RATE(519231000, 173, 2, 2,  5046),
+	PLL_36XX_RATE(500000000, 250, 3, 2,     0),
+	PLL_36XX_RATE(445500000, 149, 2, 2, 32768),
+	PLL_36XX_RATE(445055000, 148, 2, 2, 23047),
+	PLL_36XX_RATE(400000000, 200, 3, 2,     0),
+	PLL_36XX_RATE(371250000, 124, 2, 2, 49512),
+	PLL_36XX_RATE(370879000, 185, 3, 2, 28803),
+	PLL_36XX_RATE(340000000, 170, 3, 2,     0),
+	PLL_36XX_RATE(335000000, 112, 2, 2, 43691),
+	PLL_36XX_RATE(333000000, 111, 2, 2,     0),
+	PLL_36XX_RATE(330000000, 110, 2, 2,     0),
+	PLL_36XX_RATE(320000000, 107, 2, 2, 43691),
+	PLL_36XX_RATE(300000000, 100, 2, 2,     0),
+	PLL_36XX_RATE(275000000, 275, 3, 3,     0),
+	PLL_36XX_RATE(222750000, 149, 2, 3, 32768),
+	PLL_36XX_RATE(222528000, 148, 2, 3, 23069),
+	PLL_36XX_RATE(160000000, 160, 3, 3,     0),
+	PLL_36XX_RATE(148500000,  99, 2, 3,     0),
+	PLL_36XX_RATE(148352000,  99, 2, 3, 59070),
+	PLL_36XX_RATE(108000000, 144, 2, 4,     0),
+	PLL_36XX_RATE( 74250000,  99, 2, 4,     0),
+	PLL_36XX_RATE( 74176000,  99, 3, 4, 59070),
+	PLL_36XX_RATE( 54054000, 216, 3, 5, 14156),
+	PLL_36XX_RATE( 54000000, 144, 2, 5,     0),

Are all these frequencies above calculated exactly? For correct operation of rate setting code, it is necessary for frequency values specified in these arrays to be exact, not rounded.

Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux