On Wed, Oct 02, 2019 at 12:35:06PM +0200, Maxime Ripard wrote:
> Hi,
>
> On Tue, Oct 01, 2019 at 08:41:32PM +0200, Corentin Labbe wrote:
> > + /* CTS and recent CE (H6) need length in bytes, in word otherwise */
> > + if (ce->variant->model == CE_v2)
> > + cet->t_dlen = areq->cryptlen;
>
> It's entirely redundant withe the compatible.
>
> How about using something like has_t_dlen or whatever name you find
> best in the variant structure?
>
Hello
I will fix that, I started with has_t_dlen_in_bytes
> > +static int sun8i_ce_probe(struct platform_device *pdev)
> > +{
> > + struct resource *res;
> > + u32 v;
> > + int err, i, ce_method, id, irq;
> > + unsigned long cr;
> > + struct sun8i_ce_dev *ce;
> > +
> > + ce = devm_kzalloc(&pdev->dev, sizeof(*ce), GFP_KERNEL);
> > + if (!ce)
> > + return -ENOMEM;
> > +
> > + ce->dev = &pdev->dev;
> > + platform_set_drvdata(pdev, ce);
> > +
> > + ce->variant = of_device_get_match_data(&pdev->dev);
> > + if (!ce->variant) {
> > + dev_err(&pdev->dev, "Missing Crypto Engine variant\n");
> > + return -EINVAL;
> > + }
> > +
> > + res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > + ce->base = devm_ioremap_resource(&pdev->dev, res);
> > + if (IS_ERR(ce->base))
> > + return PTR_ERR(ce->base);
> > +
> > + for (i = 0; i < CE_MAX_CLOCKS; i++) {
> > + if (!ce->variant->ce_clks[i].name)
> > + continue;
> > + ce->ceclks[i] = devm_clk_get(&pdev->dev, ce->variant->ce_clks[i].name);
> > + if (IS_ERR(ce->ceclks[i])) {
> > + err = PTR_ERR(ce->ceclks[i]);
> > + dev_err(&pdev->dev, "Cannot get %s CE clock err=%d\n",
> > + ce->variant->ce_clks[i].name, err);
> > + return err;
> > + }
> > + cr = clk_get_rate(ce->ceclks[i]);
> > + if (!cr)
> > + return -EINVAL;
> > + if (ce->variant->ce_clks[i].freq > 0 &&
> > + cr != ce->variant->ce_clks[i].freq) {
> > + dev_info(&pdev->dev, "Set %s clock to %lu (%lu Mhz) from %lu (%lu Mhz)\n",
> > + ce->variant->ce_clks[i].name,
> > + ce->variant->ce_clks[i].freq,
> > + ce->variant->ce_clks[i].freq / 1000000,
> > + cr, cr / 1000000);
> > + err = clk_set_rate(ce->ceclks[i], ce->variant->ce_clks[i].freq);
> > + if (err)
> > + dev_err(&pdev->dev, "Fail to set %s clk speed to %lu hz\n",
> > + ce->variant->ce_clks[i].name,
> > + ce->variant->ce_clks[i].freq);
> > + }
> > + if (ce->variant->ce_clks[i].max_freq > 0 &&
> > + cr > ce->variant->ce_clks[i].max_freq)
> > + dev_warn(&pdev->dev, "Frequency for %s (%lu hz) is higher than datasheet's recommandation (%lu hz)",
> > + ce->variant->ce_clks[i].name, cr,
> > + ce->variant->ce_clks[i].max_freq);
> > + }
> > +
> > + /* Get Non Secure IRQ */
> > + irq = platform_get_irq(pdev, 0);
> > + if (irq < 0) {
> > + dev_err(ce->dev, "Cannot get CryptoEngine Non-secure IRQ\n");
> > + return irq;
> > + }
> > +
> > + ce->reset = devm_reset_control_get_optional(&pdev->dev, "bus");
> > + if (IS_ERR(ce->reset)) {
> > + if (PTR_ERR(ce->reset) == -EPROBE_DEFER)
> > + return PTR_ERR(ce->reset);
> > + dev_err(&pdev->dev, "No reset control found\n");
> > + return PTR_ERR(ce->reset);
> > + }
> > +
> > + mutex_init(&ce->mlock);
> > +
> > + err = allocate_chanlist(ce);
> > + if (err)
> > + return err;
> > +
> > + err = sun8i_ce_pm_init(ce);
> > + if (err)
> > + goto error_pm;
> > +
> > + err = devm_request_irq(&pdev->dev, irq, ce_irq_handler, 0,
> > + "sun8i-ce-ns", ce);
> > + if (err) {
> > + dev_err(ce->dev, "Cannot request CryptoEngine Non-secure IRQ (err=%d)\n", err);
> > + goto error_irq;
> > + }
> > +
> > + for (i = 0; i < ARRAY_SIZE(ce_algs); i++) {
> > + ce_algs[i].ce = ce;
> > + switch (ce_algs[i].type) {
> > + case CRYPTO_ALG_TYPE_SKCIPHER:
> > + id = ce_algs[i].ce_algo_id;
> > + ce_method = ce->variant->alg_cipher[id];
> > + if (ce_method == CE_ID_NOTSUPP) {
> > + dev_info(ce->dev,
> > + "DEBUG: Algo of %s not supported\n",
> > + ce_algs[i].alg.skcipher.base.cra_name);
> > + ce_algs[i].ce = NULL;
> > + break;
> > + }
> > + id = ce_algs[i].ce_blockmode;
> > + ce_method = ce->variant->op_mode[id];
> > + if (ce_method == CE_ID_NOTSUPP) {
> > + dev_info(ce->dev, "DEBUG: Blockmode of %s not supported\n",
> > + ce_algs[i].alg.skcipher.base.cra_name);
> > + ce_algs[i].ce = NULL;
> > + break;
> > + }
> > + dev_info(ce->dev, "DEBUG: Register %s\n",
> > + ce_algs[i].alg.skcipher.base.cra_name);
> > + err = crypto_register_skcipher(&ce_algs[i].alg.skcipher);
> > + if (err) {
> > + dev_err(ce->dev, "Fail to register %s\n",
> > + ce_algs[i].alg.skcipher.base.cra_name);
> > + ce_algs[i].ce = NULL;
> > + goto error_alg;
> > + }
> > + break;
> > + default:
> > + ce_algs[i].ce = NULL;
> > + dev_err(ce->dev, "ERROR: tryed to register an unknown algo\n");
> > + }
> > + }
> > +
> > + err = pm_runtime_get_sync(ce->dev);
> > + if (err < 0)
> > + goto error_alg;
> > +
> > + v = readl(ce->base + CE_CTR);
> > + v >>= CE_DIE_ID_SHIFT;
> > + v &= CE_DIE_ID_MASK;
> > + dev_info(&pdev->dev, "CryptoEngine Die ID %x\n", v);
> > +
> > + pm_runtime_put_sync(ce->dev);
> > +
> > +#ifdef CONFIG_CRYPTO_DEV_SUN8I_CE_DEBUG
> > + /* Ignore error of debugfs */
> > + ce->dbgfs_dir = debugfs_create_dir("sun8i-ce", NULL);
> > + ce->dbgfs_stats = debugfs_create_file("stats", 0444,
> > + ce->dbgfs_dir, ce,
> > + &sun8i_ce_debugfs_fops);
> > +#endif
> > + return 0;
> > +error_alg:
> > + unregister_algs(ce);
> > + i = MAXFLOW;
> > +error_irq:
> > + sun8i_ce_pm_exit(ce);
> > +error_pm:
> > + free_chanlist(ce, i);
> > + return err;
> > +}
>
> It's still pretty long. Can you move the clocks, algo initialisation
> (and debugfs maybe?) to a function of their own?
>
It is much cleaner with clock and algo init in functions, thanks!
Regards
