Add v4l2 controls to report the pixel rates of each mode. This is
needed by some CSI2 receiver in order to perform proper DPHY
configuration.
Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
---
drivers/media/i2c/ov5640.c | 25 +++++++++++++++++++++++--
1 file changed, 23 insertions(+), 2 deletions(-)
diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
index 500d9bbff10b..a3946ca6a13d 100644
--- a/drivers/media/i2c/ov5640.c
+++ b/drivers/media/i2c/ov5640.c
@@ -193,6 +193,7 @@ struct ov5640_mode_info {
struct ov5640_ctrls {
struct v4l2_ctrl_handler handler;
+ struct v4l2_ctrl *pixel_rate;
struct {
struct v4l2_ctrl *auto_exp;
struct v4l2_ctrl *exposure;
@@ -1614,6 +1615,16 @@ ov5640_find_mode(struct ov5640_dev *sensor, enum ov5640_frame_rate fr,
return mode;
}
+static u64 ov5640_calc_pixel_rate(struct ov5640_dev *sensor)
+{
+ u64 rate;
+
+ rate = sensor->current_mode->vtot * sensor->current_mode->htot;
+ rate *= ov5640_framerates[sensor->current_fr];
+
+ return rate;
+}
+
/*
* sensor changes between scaling and subsampling, go through
* exposure calculation
@@ -1818,8 +1829,7 @@ static int ov5640_set_mode(struct ov5640_dev *sensor)
* All the formats we support have 16 bits per pixel, seems to require
* the same rate than YUV, so we can just use 16 bpp all the time.
*/
- rate = mode->vtot * mode->htot * 16;
- rate *= ov5640_framerates[sensor->current_fr];
+ rate = ov5640_calc_pixel_rate(sensor) * 16;
if (sensor->ep.bus_type == V4L2_MBUS_CSI2_DPHY) {
rate = rate / sensor->ep.bus.mipi_csi2.num_data_lanes;
ret = ov5640_set_mipi_pclk(sensor, rate);
@@ -2233,6 +2243,8 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
if (mbus_fmt->code != sensor->fmt.code)
sensor->pending_fmt_change = true;
+ __v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate,
+ ov5640_calc_pixel_rate(sensor));
out:
mutex_unlock(&sensor->lock);
return ret;
@@ -2657,6 +2669,12 @@ static int ov5640_init_controls(struct ov5640_dev *sensor)
/* we can use our own mutex for the ctrl lock */
hdl->lock = &sensor->lock;
+ /* Clock related controls */
+ ctrls->pixel_rate = v4l2_ctrl_new_std(hdl, ops, V4L2_CID_PIXEL_RATE,
+ 0, INT_MAX, 1,
+ ov5640_calc_pixel_rate(sensor));
+ ctrls->pixel_rate->flags |= V4L2_CTRL_FLAG_READ_ONLY;
+
/* Auto/manual white balance */
ctrls->auto_wb = v4l2_ctrl_new_std(hdl, ops,
V4L2_CID_AUTO_WHITE_BALANCE,
@@ -2816,6 +2834,9 @@ static int ov5640_s_frame_interval(struct v4l2_subdev *sd,
sensor->frame_interval = fi->interval;
sensor->current_mode = mode;
sensor->pending_mode_change = true;
+
+ __v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate,
+ ov5640_calc_pixel_rate(sensor));
}
out:
mutex_unlock(&sensor->lock);
--
2.17.1
