Add the ability to get the clock for each clock input pin of the chip and enable MCLK2 since that is expected to be a permanently enabled 32kHz clock. Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxx> --- Changes since v4: - Change (ret != 0) to (!ret) drivers/mfd/madera-core.c | 27 ++++++++++++++++++++++++++- include/linux/mfd/madera/core.h | 11 +++++++++++ 2 files changed, 37 insertions(+), 1 deletion(-) diff --git a/drivers/mfd/madera-core.c b/drivers/mfd/madera-core.c index 29540cbf75934..a8cfadc1fc01e 100644 --- a/drivers/mfd/madera-core.c +++ b/drivers/mfd/madera-core.c @@ -450,6 +450,21 @@ int madera_dev_init(struct madera *madera) sizeof(madera->pdata)); } + madera->mclk[MADERA_MCLK1].id = "mclk1"; + madera->mclk[MADERA_MCLK2].id = "mclk2"; + madera->mclk[MADERA_MCLK3].id = "mclk3"; + + ret = devm_clk_bulk_get_optional(madera->dev, ARRAY_SIZE(madera->mclk), + madera->mclk); + if (ret) { + dev_err(madera->dev, "Failed to get clocks: %d\n", ret); + return ret; + } + + /* Not using devm_clk_get to prevent breakage of existing DTs */ + if (!madera->mclk[MADERA_MCLK2].clk) + dev_warn(madera->dev, "Missing MCLK2, requires 32kHz clock\n"); + ret = madera_get_reset_gpio(madera); if (ret) return ret; @@ -660,13 +675,19 @@ int madera_dev_init(struct madera *madera) } /* Init 32k clock sourced from MCLK2 */ + ret = clk_prepare_enable(madera->mclk[MADERA_MCLK2].clk); + if (ret) { + dev_err(madera->dev, "Failed to enable 32k clock: %d\n", ret); + goto err_reset; + } + ret = regmap_update_bits(madera->regmap, MADERA_CLOCK_32K_1, MADERA_CLK_32K_ENA_MASK | MADERA_CLK_32K_SRC_MASK, MADERA_CLK_32K_ENA | MADERA_32KZ_MCLK2); if (ret) { dev_err(madera->dev, "Failed to init 32k clock: %d\n", ret); - goto err_reset; + goto err_clock; } pm_runtime_set_active(madera->dev); @@ -687,6 +708,8 @@ int madera_dev_init(struct madera *madera) err_pm_runtime: pm_runtime_disable(madera->dev); +err_clock: + clk_disable_unprepare(madera->mclk[MADERA_MCLK2].clk); err_reset: madera_enable_hard_reset(madera); regulator_disable(madera->dcvdd); @@ -713,6 +736,8 @@ int madera_dev_exit(struct madera *madera) */ pm_runtime_disable(madera->dev); + clk_disable_unprepare(madera->mclk[MADERA_MCLK2].clk); + regulator_disable(madera->dcvdd); regulator_put(madera->dcvdd); diff --git a/include/linux/mfd/madera/core.h b/include/linux/mfd/madera/core.h index 7ffa696cce7ca..ad2c138105d4b 100644 --- a/include/linux/mfd/madera/core.h +++ b/include/linux/mfd/madera/core.h @@ -8,6 +8,7 @@ #ifndef MADERA_CORE_H #define MADERA_CORE_H +#include <linux/clk.h> #include <linux/gpio/consumer.h> #include <linux/interrupt.h> #include <linux/mfd/madera/pdata.h> @@ -29,6 +30,13 @@ enum madera_type { CS42L92 = 9, }; +enum { + MADERA_MCLK1, + MADERA_MCLK2, + MADERA_MCLK3, + MADERA_NUM_MCLK +}; + #define MADERA_MAX_CORE_SUPPLIES 2 #define MADERA_MAX_GPIOS 40 @@ -155,6 +163,7 @@ struct snd_soc_dapm_context; * @irq_dev: the irqchip child driver device * @irq_data: pointer to irqchip data for the child irqchip driver * @irq: host irq number from SPI or I2C configuration + * @mclk: Structure holding clock supplies * @out_clamp: indicates output clamp state for each analogue output * @out_shorted: indicates short circuit state for each analogue output * @hp_ena: bitflags of enable state for the headphone outputs @@ -184,6 +193,8 @@ struct madera { struct regmap_irq_chip_data *irq_data; int irq; + struct clk_bulk_data mclk[MADERA_NUM_MCLK]; + unsigned int num_micbias; unsigned int num_childbias[MADERA_MAX_MICBIAS]; -- 2.11.0