usb-hcd.txt has been converted to YAML. Update references accordingly.
Fixes: 14ec072a19ad ("dt-bindings: usb: Convert USB HCD generic binding to YAML")
Signed-off-by: Jonathan Neuschäfer <j.neuschaefer@xxxxxxx>
---
Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt | 4 ++--
Documentation/devicetree/bindings/usb/mediatek,mtu3.txt | 4 ++--
Documentation/devicetree/bindings/usb/usb-uhci.txt | 2 +-
Documentation/devicetree/bindings/usb/usb-xhci.txt | 4 ++--
4 files changed, 7 insertions(+), 7 deletions(-)
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
index f3e4acecabe8..42d8814f903a 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtk-xhci.txt
@@ -33,7 +33,7 @@ Required properties:
"dma_ck": dma_bus clock for data transfer by DMA,
"xhci_ck": controller clock
- - phys : see usb-hcd.txt in the current directory
+ - phys : see usb-hcd.yaml in the current directory
Optional properties:
- wakeup-source : enable USB remote wakeup;
@@ -53,7 +53,7 @@ Optional properties:
See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt
- imod-interval-ns: default interrupt moderation interval is 5000ns
-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
supported.
Example:
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
index b9af7f5ee91d..e0ae6096f7ac 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.txt
@@ -17,7 +17,7 @@ Required properties:
- clock-names : must contain "sys_ck" for clock of controller,
the following clocks are optional:
"ref_ck", "mcu_ck" and "dma_ck";
- - phys : see usb-hcd.txt in the current directory
+ - phys : see usb-hcd.yaml in the current directory
- dr_mode : should be one of "host", "peripheral" or "otg",
refer to usb/generic.txt
@@ -60,7 +60,7 @@ Optional properties:
- mediatek,u3p-dis-msk : mask to disable u3ports, bit0 for u3port0,
bit1 for u3port1, ... etc;
-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
supported.
Sub-nodes:
diff --git a/Documentation/devicetree/bindings/usb/usb-uhci.txt b/Documentation/devicetree/bindings/usb/usb-uhci.txt
index cc2e6f7d602e..d1702eb2c8bd 100644
--- a/Documentation/devicetree/bindings/usb/usb-uhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-uhci.txt
@@ -6,7 +6,7 @@ Required properties:
- reg : Should contain 1 register ranges(address and length)
- interrupts : UHCI controller interrupt
-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
supported.
Example:
diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt
index 97400e8f8605..b49b819571f9 100644
--- a/Documentation/devicetree/bindings/usb/usb-xhci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt
@@ -41,9 +41,9 @@ Optional properties:
- usb3-lpm-capable: determines if platform is USB3 LPM capable
- quirk-broken-port-ped: set if the controller has broken port disable mechanism
- imod-interval-ns: default interrupt moderation interval is 5000ns
- - phys : see usb-hcd.txt in the current directory
+ - phys : see usb-hcd.yaml in the current directory
-additionally the properties from usb-hcd.txt (in the current directory) are
+additionally the properties from usb-hcd.yaml (in the current directory) are
supported.
--
2.20.1
