Re: [PATCH] pci-rcar-gen2: add device tree support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Friday 25 April 2014 11:45:35 Bjorn Helgaas wrote:
> > +This is the bridge used internally to connect the USB controllers to the
> > +AHB. There is one bridge instance per USB port connected to the internal
> > +OHCI and EHCI controllers.
> > +
> > +Required properties:
> > +- compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
> > +           "renesas,pci-r8a7791" for the R8A7791 SoC.
> > +- reg:       A list of physical regions to access the device: the first is
> > +     the operational registers for the OHCI/EHCI controllers and the
> > +     second is for the bridge configuration and control registers.
> > +- interrupts: interrupt for the device.
> > +- clocks: The reference to the device clock.
> > +- bus-range: The PCI bus number range; as this is a single bus, the range
> > +           should be specified as the same value twice.

Actually, this doesn't conform to the generic PCI binding, which requires
a number of additional properties.

	Arnd
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux