Re: [PATCH] arm64: tegra: Set dma-ranges for memory subsystem

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, Oct 02, 2019 at 05:46:54PM +0200, Thierry Reding wrote:
> From: Thierry Reding <treding@xxxxxxxxxx>
> 
> On Tegra194, all clients of the memory subsystem can generally address
> 40 bits of system memory. However, bit 39 has special meaning and will
> cause the memory controller to reorder sectors for block-linear buffer
> formats. This is primarily useful for graphics-related devices.
> 
> Use of bit 39 must be controlled on a case-by-case basis. Buffers that
> are used with bit 39 set by one device may be used with bit 39 cleared
> by other devices.
> 
> Care must be taken to allocate buffers at addresses that do not require
> bit 39 to be set. This is normally not an issue for system memory since
> there are no Tegra-based systems with enough RAM to exhaust the 39-bit
> physical address space. However, when a device is behind an IOMMU, such
> as the ARM SMMU on Tegra194, the IOMMUs input address space can cause
> IOVA allocations to happen in this region. This is for example the case
> when an operating system implements a top-down allocation policy for IO
> virtual addresses.
> 
> To account for this, describe the path that memory accesses take through
> the system. Memory clients will send requests to the memory controller,
> which forwards bits [38:0] of the address either to the external memory
> controller or the SMMU, depending on the stream ID of the access. A good
> way to describe this is using the interconnects bindings, see:
> 
> 	Documentation/devicetree/bindings/interconnect/interconnect.txt
> 
> The standard "dma-mem" path is used to describe the path towards system
> memory via the memory controller. A dma-ranges property in the memory
> controller's device tree node limits the range of DMA addresses that the
> memory clients can use to bits [38:0], ensuring that bit 39 is not used.
> 
> Signed-off-by: Thierry Reding <treding@xxxxxxxxxx>
> ---
> Arnd, Rob, Robin,
> 
> This is what I came up with after our discussion on this thread:
> 
> 	[PATCH 00/11] of: dma-ranges fixes and improvements
> 
> Please take a look and see if that sounds reasonable. I'm slightly
> unsure about the interconnects bindings as I used them here. According
> to the bindings there's always supposed to be a pair of interconnect
> paths, so this patch is not exactly compliant. It does work fine with
> the __of_get_dma_parent() code that Maxime introduced a couple of months
> ago and really very neatly describes the hardware. Interestingly this
> will come in handy very soon now since we're starting work on a proper
> interconnect provider (the memory controller driver is the natural fit
> for this because it has additional knobs to configure latency and
> priorities, etc.) to implement external memory frequency scaling based
> on bandwidth requests from memory clients. So this all fits together
> very nicely. But as I said, I'm not exactly sure what to add as a second
> entry in "interconnects" to make this compliant with the bindings.
> 
> Adding Georgi and Maxime, perhaps they can help clarify.
> 
> Thierry

Updating Maxime's email address.

Thierry

>  arch/arm64/boot/dts/nvidia/tegra194.dtsi | 32 +++++++++++++++++++++++-
>  1 file changed, 31 insertions(+), 1 deletion(-)
> 
> diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
> index 6900e8bdf24d..f50150217806 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
> @@ -53,6 +53,8 @@
>  			clock-names = "master_bus", "slave_bus", "rx", "tx", "ptp_ref";
>  			resets = <&bpmp TEGRA194_RESET_EQOS>;
>  			reset-names = "eqos";
> +			interconnects = <&mc TEGRA194_SID_EQOS>;
> +			interconnect-names = "dma-mem";
>  			iommus = <&smmu TEGRA194_SID_EQOS>;
>  			status = "disabled";
>  
> @@ -166,10 +168,16 @@
>  			};
>  		};
>  
> -		memory-controller@2c00000 {
> +		mc: memory-controller@2c00000 {
>  			compatible = "nvidia,tegra194-mc";
>  			reg = <0x02c00000 0xb0000>;
> +			#interconnect-cells = <1>;
>  			status = "disabled";
> +
> +			#address-cells = <2>;
> +			#size-cells = <2>;
> +
> +			dma-ranges = <0x0 0x0 0x0 0x80 0x0>;
>  		};
>  
>  		uarta: serial@3100000 {
> @@ -416,6 +424,8 @@
>  			clock-names = "sdhci";
>  			resets = <&bpmp TEGRA194_RESET_SDMMC1>;
>  			reset-names = "sdhci";
> +			interconnects = <&mc TEGRA194_SID_SDMMC1>;
> +			interconnect-names = "dma-mem";
>  			iommus = <&smmu TEGRA194_SID_SDMMC1>;
>  			nvidia,pad-autocal-pull-up-offset-3v3-timeout =
>  									<0x07>;
> @@ -439,6 +449,8 @@
>  			clock-names = "sdhci";
>  			resets = <&bpmp TEGRA194_RESET_SDMMC3>;
>  			reset-names = "sdhci";
> +			interconnects = <&mc TEGRA194_SID_SDMMC3>;
> +			interconnect-names = "dma-mem";
>  			iommus = <&smmu TEGRA194_SID_SDMMC3>;
>  			nvidia,pad-autocal-pull-up-offset-1v8 = <0x00>;
>  			nvidia,pad-autocal-pull-down-offset-1v8 = <0x7a>;
> @@ -467,6 +479,8 @@
>  					  <&bpmp TEGRA194_CLK_PLLC4>;
>  			resets = <&bpmp TEGRA194_RESET_SDMMC4>;
>  			reset-names = "sdhci";
> +			interconnects = <&mc TEGRA194_SID_SDMMC4>;
> +			interconnect-names = "dma-mem";
>  			iommus = <&smmu TEGRA194_SID_SDMMC4>;
>  			nvidia,pad-autocal-pull-up-offset-hs400 = <0x00>;
>  			nvidia,pad-autocal-pull-down-offset-hs400 = <0x00>;
> @@ -496,6 +510,8 @@
>  				 <&bpmp TEGRA194_RESET_HDA2HDMICODEC>;
>  			reset-names = "hda", "hda2codec_2x", "hda2hdmi";
>  			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
> +			interconnects = <&mc TEGRA194_SID_HDA>;
> +			interconnect-names = "dma-mem";
>  			iommus = <&smmu TEGRA194_SID_HDA>;
>  			status = "disabled";
>  		};
> @@ -831,6 +847,8 @@
>  			#size-cells = <1>;
>  
>  			ranges = <0x15000000 0x15000000 0x01000000>;
> +			interconnects = <&mc TEGRA194_SID_HOST1X>;
> +			interconnect-names = "dma-mem";
>  			iommus = <&smmu TEGRA194_SID_HOST1X>;
>  
>  			display-hub@15200000 {
> @@ -867,6 +885,8 @@
>  					reset-names = "dc";
>  
>  					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISP>;
> +					interconnects = <&mc TEGRA194_SID_NVDISPLAY>;
> +					interconnect-names = "dma-mem";
>  					iommus = <&smmu TEGRA194_SID_NVDISPLAY>;
>  
>  					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
> @@ -883,6 +903,8 @@
>  					reset-names = "dc";
>  
>  					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPB>;
> +					interconnects = <&mc TEGRA194_SID_NVDISPLAY>;
> +					interconnect-names = "dma-mem";
>  					iommus = <&smmu TEGRA194_SID_NVDISPLAY>;
>  
>  					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
> @@ -899,6 +921,8 @@
>  					reset-names = "dc";
>  
>  					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
> +					interconnects = <&mc TEGRA194_SID_NVDISPLAY>;
> +					interconnect-names = "dma-mem";
>  					iommus = <&smmu TEGRA194_SID_NVDISPLAY>;
>  
>  					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
> @@ -915,6 +939,8 @@
>  					reset-names = "dc";
>  
>  					power-domains = <&bpmp TEGRA194_POWER_DOMAIN_DISPC>;
> +					interconnects = <&mc TEGRA194_SID_NVDISPLAY>;
> +					interconnect-names = "dma-mem";
>  					iommus = <&smmu TEGRA194_SID_NVDISPLAY>;
>  
>  					nvidia,outputs = <&sor0 &sor1 &sor2 &sor3>;
> @@ -1182,6 +1208,8 @@
>  			status = "disabled";
>  
>  			power-domains = <&bpmp TEGRA194_POWER_DOMAIN_GPU>;
> +			interconnects = <&mc TEGRA194_SID_GPU>;
> +			interconnect-names = "dma-mem";
>  			iommus = <&smmu TEGRA194_SID_GPU>;
>  		};
>  	};
> @@ -1573,6 +1601,8 @@
>  		#clock-cells = <1>;
>  		#reset-cells = <1>;
>  		#power-domain-cells = <1>;
> +		interconnects = <&mc TEGRA194_SID_BPMP>;
> +		interconnect-names = "dma-mem";
>  		iommus = <&smmu TEGRA194_SID_BPMP>;
>  
>  		bpmp_i2c: i2c {
> -- 
> 2.23.0
> 

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux