[PATCH 2/2] dt-bindings: usb: Bring back phy-names

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



While the original bindings that were superseeded by the YAML schemas
didn't mention that phy-names was needed, it turns out that phy-names is
required if phys is set according to phy/phy-bindings.txt.

Let's add back those properties.

Fixes: 14ec072a19ad ("dt-bindings: usb: Convert USB HCD generic binding to YAML")
Fixes: c93bcace1098 ("dt-bindings: usb: Convert the generic OHCI binding to YAML")
Fixes: c3e2485d5f4f ("dt-bindings: usb: Convert the generic EHCI binding to YAML")
Reported-by: Emmanuel Vadot <manu@xxxxxxxxxxxxxxxx>
Signed-off-by: Maxime Ripard <mripard@xxxxxxxxxx>
---
 Documentation/devicetree/bindings/usb/generic-ehci.yaml | 7 ++++++-
 Documentation/devicetree/bindings/usb/generic-ohci.yaml | 7 ++++++-
 Documentation/devicetree/bindings/usb/usb-hcd.yaml      | 5 +++++
 3 files changed, 17 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/usb/generic-ehci.yaml b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
index 059f6ef1ad4a..1ca64c85191a 100644
--- a/Documentation/devicetree/bindings/usb/generic-ehci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ehci.yaml
@@ -63,7 +63,11 @@ properties:
     description:
       Set this flag to force EHCI reset after resume.
 
-  phys: true
+  phys:
+    description: PHY specifier for the USB PHY
+
+  phy-names:
+    const: usb
 
 required:
   - compatible
@@ -89,6 +93,7 @@ examples:
         interrupts = <39>;
         clocks = <&ahb_gates 1>;
         phys = <&usbphy 1>;
+        phy-names = "usb";
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/usb/generic-ohci.yaml b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
index da5a14becbe5..bcffec1f1341 100644
--- a/Documentation/devicetree/bindings/usb/generic-ohci.yaml
+++ b/Documentation/devicetree/bindings/usb/generic-ohci.yaml
@@ -67,7 +67,11 @@ properties:
     description:
       Overrides the detected port count
 
-  phys: true
+  phys:
+    description: PHY specifier for the USB PHY
+
+  phy-names:
+    const: usb
 
 required:
   - compatible
@@ -84,6 +88,7 @@ examples:
           interrupts = <64>;
           clocks = <&usb_clk 6>, <&ahb_gates 2>;
           phys = <&usbphy 1>;
+          phy-names = "usb";
       };
 
 ...
diff --git a/Documentation/devicetree/bindings/usb/usb-hcd.yaml b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
index 9c8c56d3a792..7263b7f2b510 100644
--- a/Documentation/devicetree/bindings/usb/usb-hcd.yaml
+++ b/Documentation/devicetree/bindings/usb/usb-hcd.yaml
@@ -18,8 +18,13 @@ properties:
     description:
       List of all the USB PHYs on this HCD
 
+  phy-names:
+    description:
+      Name specifier for the USB PHY
+
 examples:
   - |
     usb {
         phys = <&usb2_phy1>, <&usb3_phy1>;
+        phy-names = "usb";
     };
-- 
2.23.0




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux