On Wed, Oct 02, 2019 at 04:00:50PM +0800, JC Kuo wrote:
> Adds the XUSB pad and XUSB controllers on Tegra194.
>
> Signed-off-by: JC Kuo <jckuo@xxxxxxxxxx>
> ---
> arch/arm64/boot/dts/nvidia/tegra194.dtsi | 130 +++++++++++++++++++++++
> 1 file changed, 130 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/nvidia/tegra194.dtsi b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
> index 3c0cf54f0aab..4d3371d3a407 100644
> --- a/arch/arm64/boot/dts/nvidia/tegra194.dtsi
> +++ b/arch/arm64/boot/dts/nvidia/tegra194.dtsi
> @@ -1599,4 +1599,134 @@
> interrupt-parent = <&gic>;
> always-on;
> };
> +
> + xusb_padctl: padctl@3520000 {
> + compatible = "nvidia,tegra194-xusb-padctl";
> + reg = <0x0 0x03520000 0x0 0x1000>,
> + <0x0 0x03540000 0x0 0x1000>;
These should generally be aligned. Use tabs first and then spaces to
make the opening < on subsequent lines align with the opening < on the
first line. There are a couple more like this below.
> + reg-names = "padctl", "ao";
> +
> + resets = <&bpmp TEGRA194_RESET_XUSB_PADCTL>;
> + reset-names = "padctl";
> +
> + status = "disabled";
> +
> + pads {
> + usb2 {
> + clocks = <&bpmp TEGRA194_CLK_USB2_TRK>;
> + clock-names = "trk";
> +
> + lanes {
> + usb2-0 {
> + nvidia,function = "xusb";
> + status = "disabled";
> + #phy-cells = <0>;
> + };
> + usb2-1 {
I prefer blank lines to visually separate blocks here and below.
> + nvidia,function = "xusb";
> + status = "disabled";
> + #phy-cells = <0>;
> + };
> + usb2-2 {
> + nvidia,function = "xusb";
> + status = "disabled";
> + #phy-cells = <0>;
> + };
> + usb2-3 {
> + nvidia,function = "xusb";
> + status = "disabled";
> + #phy-cells = <0>;
> + };
> + };
> + };
> + usb3 {
> + lanes {
> + usb3-0 {
> + nvidia,function = "xusb";
> + status = "disabled";
> + #phy-cells = <0>;
> + };
> + usb3-1 {
> + nvidia,function = "xusb";
> + status = "disabled";
> + #phy-cells = <0>;
> + };
> + usb3-2 {
> + nvidia,function = "xusb";
> + status = "disabled";
> + #phy-cells = <0>;
> + };
> + usb3-3 {
> + nvidia,function = "xusb";
> + status = "disabled";
> + #phy-cells = <0>;
> + };
> + };
> + };
> + };
> +
> + ports {
> + usb2-0 {
> + status = "disabled";
> + };
> + usb2-1 {
> + status = "disabled";
> + };
> + usb2-2 {
> + status = "disabled";
> + };
> + usb2-3 {
> + status = "disabled";
> + };
> + usb3-0 {
> + status = "disabled";
> + };
> + usb3-1 {
> + status = "disabled";
> + };
> + usb3-2 {
> + status = "disabled";
> + };
> + usb3-3 {
> + status = "disabled";
> + };
> + };
> + };
> +
> + tegra_xhci: xhci@3610000 {
The tegra_xhci is unused, so I don't think we need to add it. Also, the
name of this node should be usb@3610000 since it's the compatible string
that defines (together with the bindings) that this is XHCI capable. But
it is fundamentally a USB controller, so the name should reflect that.
> + compatible = "nvidia,tegra194-xusb";
> + reg = <0x0 0x03610000 0x0 0x40000>,
> + <0x0 0x03600000 0x0 0x10000>;
> + reg-names = "hcd", "fpci";
> +
> + interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH>;
> +
> + clocks = <&bpmp TEGRA194_CLK_XUSB_CORE_MUX>,
> + <&bpmp TEGRA194_CLK_XUSB_CORE_HOST>,
> + <&bpmp TEGRA194_CLK_XUSB_CORE_SS>,
> + <&bpmp TEGRA194_CLK_XUSB_FALCON>,
> + <&bpmp TEGRA194_CLK_XUSB_FALCON_HOST>,
> + <&bpmp TEGRA194_CLK_XUSB_FALCON_SS>,
> + <&bpmp TEGRA194_CLK_XUSB_FS>,
> + <&bpmp TEGRA194_CLK_XUSB_FS_HOST>,
> + <&bpmp TEGRA194_CLK_XUSB_SS>,
> + <&bpmp TEGRA194_CLK_XUSB_SS_SUPERSPEED>,
> + <&bpmp TEGRA194_CLK_UTMIPLL>,
> + <&bpmp TEGRA194_CLK_CLK_M>,
> + <&bpmp TEGRA194_CLK_PLLE>;
> + clock-names = "xusb_hs_src", "xusb_host",
> + "xusb_core_superspeed_clk", "xusb_falcon_src",
> + "xusb_falcon_host_clk", "xusb_falcon_superspeed_clk",
> + "xusb_fs_src", "xusb_fs_host_clk", "xusb_ss_src",
> + "xusb_ss", "pll_u_480m", "clk_m", "pll_e";
Some of these clocks are not defined in the bindings. Many of them are
also not used by the driver. Are all of these really needed? If they
are, please add the required ones to the bindings.
Also, for new ones, drop the _clk suffix. The fact that these are clocks
is already conveyed by the property name.
Thierry
> +
> + power-domains = <&bpmp TEGRA194_POWER_DOMAIN_XUSBC>,
> + <&bpmp TEGRA194_POWER_DOMAIN_XUSBA>;
> + power-domain-names = "xusb_host", "xusb_ss";
> +
> + nvidia,xusb-padctl = <&xusb_padctl>;
> + status = "disabled";
> + };
> };
> --
> 2.17.1
>
Attachment:
signature.asc
Description: PGP signature
