Re: [Patch 1/3] media: ov5640: add PIXEL_RATE control

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Benoit,

On Wed, Sep 25, 2019 at 10:22:59AM -0500, Benoit Parrot wrote:
> Add v4l2 controls to report the pixel rates of each mode. This is
> needed by some CSI2 receiver in order to perform proper DPHY
> configuration.
> 
> Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
> ---
>  drivers/media/i2c/ov5640.c | 25 +++++++++++++++++++++++++
>  1 file changed, 25 insertions(+)
> 
> diff --git a/drivers/media/i2c/ov5640.c b/drivers/media/i2c/ov5640.c
> index 500d9bbff10b..c2a44f30d56e 100644
> --- a/drivers/media/i2c/ov5640.c
> +++ b/drivers/media/i2c/ov5640.c
> @@ -193,6 +193,9 @@ struct ov5640_mode_info {
>  
>  struct ov5640_ctrls {
>  	struct v4l2_ctrl_handler handler;
> +	struct {
> +		struct v4l2_ctrl *pixel_rate;
> +	};
>  	struct {
>  		struct v4l2_ctrl *auto_exp;
>  		struct v4l2_ctrl *exposure;
> @@ -241,6 +244,7 @@ struct ov5640_dev {
>  	const struct ov5640_mode_info *last_mode;
>  	enum ov5640_frame_rate current_fr;
>  	struct v4l2_fract frame_interval;
> +	u64 pixel_rate;
>  
>  	struct ov5640_ctrls ctrls;
>  
> @@ -2202,6 +2206,7 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
>  	const struct ov5640_mode_info *new_mode;
>  	struct v4l2_mbus_framefmt *mbus_fmt = &format->format;
>  	struct v4l2_mbus_framefmt *fmt;
> +	u64 rate;
>  	int ret;
>  
>  	if (format->pad != 0)
> @@ -2233,6 +2238,12 @@ static int ov5640_set_fmt(struct v4l2_subdev *sd,
>  	if (mbus_fmt->code != sensor->fmt.code)
>  		sensor->pending_fmt_change = true;
>  
> +	rate = sensor->current_mode->vtot * sensor->current_mode->htot;
> +	rate *= ov5640_framerates[sensor->current_fr];
> +	sensor->pixel_rate = rate;
> +
> +	__v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate,
> +				 sensor->pixel_rate);
>  out:
>  	mutex_unlock(&sensor->lock);
>  	return ret;
> @@ -2657,6 +2668,13 @@ static int ov5640_init_controls(struct ov5640_dev *sensor)
>  	/* we can use our own mutex for the ctrl lock */
>  	hdl->lock = &sensor->lock;
>  
> +	/* Clock related controls */
> +	ctrls->pixel_rate =
> +		v4l2_ctrl_new_std(hdl, ops,
> +				  V4L2_CID_PIXEL_RATE, 0, INT_MAX, 1,
> +				  55969920);

Could you calculate this value instead of using a seemingly random number?

> +	ctrls->pixel_rate->flags |= V4L2_CTRL_FLAG_READ_ONLY;
> +
>  	/* Auto/manual white balance */
>  	ctrls->auto_wb = v4l2_ctrl_new_std(hdl, ops,
>  					   V4L2_CID_AUTO_WHITE_BALANCE,
> @@ -2782,6 +2800,7 @@ static int ov5640_s_frame_interval(struct v4l2_subdev *sd,
>  	struct ov5640_dev *sensor = to_ov5640_dev(sd);
>  	const struct ov5640_mode_info *mode;
>  	int frame_rate, ret = 0;
> +	u64 rate;
>  
>  	if (fi->pad != 0)
>  		return -EINVAL;
> @@ -2816,6 +2835,12 @@ static int ov5640_s_frame_interval(struct v4l2_subdev *sd,
>  		sensor->frame_interval = fi->interval;
>  		sensor->current_mode = mode;
>  		sensor->pending_mode_change = true;
> +
> +		rate = sensor->current_mode->vtot * sensor->current_mode->htot;
> +		rate *= ov5640_framerates[sensor->current_fr];
> +		sensor->pixel_rate = rate;

I think it'd be better to have a function to calculate the value instead of
duplicating the code here.

> +		__v4l2_ctrl_s_ctrl_int64(sensor->ctrls.pixel_rate,
> +					 sensor->pixel_rate);
>  	}
>  out:
>  	mutex_unlock(&sensor->lock);

-- 
Kind regards,

Sakari Ailus
sakari.ailus@xxxxxxxxxxxxxxx



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux