Can you try removing just the *SLEEP_1 states from the cpu-idle-states
property? I want to understand if this is triggered just by the deeper
C-state.
On Tue, Oct 1, 2019 at 3:50 AM Jeffrey Hugo <jeffrey.l.hugo@xxxxxxxxx> wrote:
>
> Amit, the merged version of the below change causes a boot failure
> (nasty hang, sometimes with RCU stalls) on the msm8998 laptops. Oddly
> enough, it seems to be resolved if I remove the cpu-idle-states
> property from one of the cpu nodes.
>
> I see no issues with the msm8998 MTP.
>
> Do you have any suggestions on how we might debug this?
>
> On Tue, May 21, 2019 at 3:38 AM Amit Kucheria <amit.kucheria@xxxxxxxxxx> wrote:
> >
> > Add device bindings for cpuidle states for cpu devices.
> >
> > Cc: Marc Gonzalez <marc.w.gonzalez@xxxxxxx>
> > Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
> > Acked-by: Daniel Lezcano <daniel.lezcano@xxxxxxxxxx>
> > ---
> > arch/arm64/boot/dts/qcom/msm8998.dtsi | 50 +++++++++++++++++++++++++++
> > 1 file changed, 50 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> > index 3fd0769fe648..54810980fcf9 100644
> > --- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
> > @@ -78,6 +78,7 @@
> > compatible = "arm,armv8";
> > reg = <0x0 0x0>;
> > enable-method = "psci";
> > + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
> > efficiency = <1024>;
> > next-level-cache = <&L2_0>;
> > L2_0: l2-cache {
> > @@ -97,6 +98,7 @@
> > compatible = "arm,armv8";
> > reg = <0x0 0x1>;
> > enable-method = "psci";
> > + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
> > efficiency = <1024>;
> > next-level-cache = <&L2_0>;
> > L1_I_1: l1-icache {
> > @@ -112,6 +114,7 @@
> > compatible = "arm,armv8";
> > reg = <0x0 0x2>;
> > enable-method = "psci";
> > + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
> > efficiency = <1024>;
> > next-level-cache = <&L2_0>;
> > L1_I_2: l1-icache {
> > @@ -127,6 +130,7 @@
> > compatible = "arm,armv8";
> > reg = <0x0 0x3>;
> > enable-method = "psci";
> > + cpu-idle-states = <&LITTLE_CPU_SLEEP_0 &LITTLE_CPU_SLEEP_1>;
> > efficiency = <1024>;
> > next-level-cache = <&L2_0>;
> > L1_I_3: l1-icache {
> > @@ -142,6 +146,7 @@
> > compatible = "arm,armv8";
> > reg = <0x0 0x100>;
> > enable-method = "psci";
> > + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
> > efficiency = <1536>;
> > next-level-cache = <&L2_1>;
> > L2_1: l2-cache {
> > @@ -161,6 +166,7 @@
> > compatible = "arm,armv8";
> > reg = <0x0 0x101>;
> > enable-method = "psci";
> > + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
> > efficiency = <1536>;
> > next-level-cache = <&L2_1>;
> > L1_I_101: l1-icache {
> > @@ -176,6 +182,7 @@
> > compatible = "arm,armv8";
> > reg = <0x0 0x102>;
> > enable-method = "psci";
> > + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
> > efficiency = <1536>;
> > next-level-cache = <&L2_1>;
> > L1_I_102: l1-icache {
> > @@ -191,6 +198,7 @@
> > compatible = "arm,armv8";
> > reg = <0x0 0x103>;
> > enable-method = "psci";
> > + cpu-idle-states = <&BIG_CPU_SLEEP_0 &BIG_CPU_SLEEP_1>;
> > efficiency = <1536>;
> > next-level-cache = <&L2_1>;
> > L1_I_103: l1-icache {
> > @@ -238,6 +246,48 @@
> > };
> > };
> > };
> > +
> > + idle-states {
> > + entry-method = "psci";
> > +
> > + LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
> > + compatible = "arm,idle-state";
> > + idle-state-name = "little-retention";
> > + arm,psci-suspend-param = <0x00000002>;
> > + entry-latency-us = <43>;
> > + exit-latency-us = <86>;
> > + min-residency-us = <200>;
> > + };
> > +
> > + LITTLE_CPU_SLEEP_1: cpu-sleep-0-1 {
> > + compatible = "arm,idle-state";
> > + idle-state-name = "little-power-collapse";
> > + arm,psci-suspend-param = <0x00000003>;
> > + entry-latency-us = <100>;
> > + exit-latency-us = <612>;
> > + min-residency-us = <1000>;
> > + local-timer-stop;
> > + };
> > +
> > + BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
> > + compatible = "arm,idle-state";
> > + idle-state-name = "big-retention";
> > + arm,psci-suspend-param = <0x00000002>;
> > + entry-latency-us = <41>;
> > + exit-latency-us = <82>;
> > + min-residency-us = <200>;
> > + };
> > +
> > + BIG_CPU_SLEEP_1: cpu-sleep-1-1 {
> > + compatible = "arm,idle-state";
> > + idle-state-name = "big-power-collapse";
> > + arm,psci-suspend-param = <0x00000003>;
> > + entry-latency-us = <100>;
> > + exit-latency-us = <525>;
> > + min-residency-us = <1000>;
> > + local-timer-stop;
> > + };
> > + };
> > };
> >
> > firmware {
> > --
> > 2.17.1
> >
