On Thu, Sep 05, 2019 at 10:43:11PM +0800, Jiaxun Yang wrote:
> Add generic device dts for Loongson-3 devices.
> They seems identical but will be different later.
>
> Signed-off-by: Jiaxun Yang <jiaxun.yang@xxxxxxxxxxx>
> ---
> arch/mips/Kconfig | 4 +-
> arch/mips/boot/dts/Makefile | 1 +
> arch/mips/boot/dts/loongson/3a-package.dtsi | 69 +++++++++++++++++++++
> arch/mips/boot/dts/loongson/3a1000_780e.dts | 10 +++
> arch/mips/boot/dts/loongson/3a2000_780e.dts | 10 +++
> arch/mips/boot/dts/loongson/3a3000_780e.dts | 10 +++
> arch/mips/boot/dts/loongson/3b-package.dtsi | 69 +++++++++++++++++++++
> arch/mips/boot/dts/loongson/3b1x00_780e.dts | 10 +++
> arch/mips/boot/dts/loongson/Makefile | 5 ++
> arch/mips/boot/dts/loongson/rs780e-pch.dtsi | 35 +++++++++++
> 10 files changed, 222 insertions(+), 1 deletion(-)
> create mode 100644 arch/mips/boot/dts/loongson/3a-package.dtsi
> create mode 100644 arch/mips/boot/dts/loongson/3a1000_780e.dts
> create mode 100644 arch/mips/boot/dts/loongson/3a2000_780e.dts
> create mode 100644 arch/mips/boot/dts/loongson/3a3000_780e.dts
> create mode 100644 arch/mips/boot/dts/loongson/3b-package.dtsi
> create mode 100644 arch/mips/boot/dts/loongson/3b1x00_780e.dts
> create mode 100644 arch/mips/boot/dts/loongson/Makefile
> create mode 100644 arch/mips/boot/dts/loongson/rs780e-pch.dtsi
>
> diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
> index b6bdd96ec74e..5bad9aafcbdf 100644
> --- a/arch/mips/Kconfig
> +++ b/arch/mips/Kconfig
> @@ -489,6 +489,8 @@ config MACH_LOONGSON64
> select SYS_SUPPORTS_LITTLE_ENDIAN
> select ZONE_DMA32
> select SYS_SUPPORTS_ZBOOT
> + select USE_OF
> + select BUILTIN_DTB
> help
> This enables the support of Loongson-3A/3B/2-series-soc processors
>
> @@ -3047,7 +3049,7 @@ endchoice
> choice
> prompt "Kernel command line type" if !CMDLINE_OVERRIDE
> default MIPS_CMDLINE_FROM_DTB if USE_OF && !ATH79 && !MACH_INGENIC && \
> - !MIPS_MALTA && \
> + !MACH_LOONGSON64 && !MIPS_MALTA && \
> !CAVIUM_OCTEON_SOC
> default MIPS_CMDLINE_FROM_BOOTLOADER
>
> diff --git a/arch/mips/boot/dts/Makefile b/arch/mips/boot/dts/Makefile
> index 1e79cab8e269..d429a69bfe30 100644
> --- a/arch/mips/boot/dts/Makefile
> +++ b/arch/mips/boot/dts/Makefile
> @@ -4,6 +4,7 @@ subdir-y += cavium-octeon
> subdir-y += img
> subdir-y += ingenic
> subdir-y += lantiq
> +subdir-y += loongson
> subdir-y += mscc
> subdir-y += mti
> subdir-y += netlogic
> diff --git a/arch/mips/boot/dts/loongson/3a-package.dtsi b/arch/mips/boot/dts/loongson/3a-package.dtsi
> new file mode 100644
> index 000000000000..739cf43c7310
> --- /dev/null
> +++ b/arch/mips/boot/dts/loongson/3a-package.dtsi
> @@ -0,0 +1,69 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpuintc: interrupt-controller {
> + #address-cells = <0>;
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + compatible = "mti,cpu-interrupt-controller";
> + };
> +
> + package@0 {
bus@1fe00000
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <1>;
> + ranges = <0 0x1fe00000 0 0x1fe00000 0x100000
> + 0 0x3ff00000 0 0x3ff00000 0x100000
> + 0xEFD 0xFB000000 0xEFD 0xFB000000 0x10000000 /* 3A HT Config Space */>;
Lowercase hex please.
> +
> + iointc: interrupt-controller@3ff01400 {
> + compatible = "loongson,ls3-iointc";
> + reg = <0 0x3ff01400 0x64>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + interrupt-parent = <&cpuintc>;
> + interrupts = <2>;
> + };
Too much indentation.
> +
> + cpu_uart0: serial@1fe001e0 {
> + device_type = "serial";
Drop device_type. It's deprecated for everything but cpu, memory, and
pci.
> + compatible = "ns16550a";
> + reg = <0 0x1fe001e0 0x8>;
> + clock-frequency = <33000000>;
> + interrupt-parent = <&iointc>;
> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
> + no-loopback-test;
> + };
> +
> + cpu_uart1: serial@1fe001e8 {
> + status = "disabled";
> + device_type = "serial";
> + compatible = "ns16550a";
> + reg = <0 0x1fe001e8 0x8>;
> + clock-frequency = <33000000>;
> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-parent = <&iointc>;
> + no-loopback-test;
> + };
> +
> + htintc: interrupt-controller@0xEFDFB000080 {
Drop '0x' and lowercase. Building with 'W=12' will tell you this. Do
that, and fix the warnings.
> + compatible = "loongson,ls3-htintc";
> + reg = <0xEFD 0xFB000080 0x100>;
lowercase
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interrupt-parent = <&iointc>;
> + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
> + <25 IRQ_TYPE_LEVEL_HIGH>,
> + <26 IRQ_TYPE_LEVEL_HIGH>,
> + <27 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +};
> diff --git a/arch/mips/boot/dts/loongson/3a1000_780e.dts b/arch/mips/boot/dts/loongson/3a1000_780e.dts
> new file mode 100644
> index 000000000000..dc1afe9410c8
> --- /dev/null
> +++ b/arch/mips/boot/dts/loongson/3a1000_780e.dts
> @@ -0,0 +1,10 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/dts-v1/;
> +
> +#include "3a-package.dtsi"
> +#include "rs780e-pch.dtsi"
> +
> +/ {
> + compatible = "loongson,ls3a1000-780e";
> +};
> diff --git a/arch/mips/boot/dts/loongson/3a2000_780e.dts b/arch/mips/boot/dts/loongson/3a2000_780e.dts
> new file mode 100644
> index 000000000000..621e0d3b5fbd
> --- /dev/null
> +++ b/arch/mips/boot/dts/loongson/3a2000_780e.dts
> @@ -0,0 +1,10 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/dts-v1/;
> +
> +#include "3a-package.dtsi"
> +#include "rs780e-pch.dtsi"
> +
> +/ {
> + compatible = "loongson,ls3a2000-780e";
> +};
> diff --git a/arch/mips/boot/dts/loongson/3a3000_780e.dts b/arch/mips/boot/dts/loongson/3a3000_780e.dts
> new file mode 100644
> index 000000000000..f170f1c2189d
> --- /dev/null
> +++ b/arch/mips/boot/dts/loongson/3a3000_780e.dts
> @@ -0,0 +1,10 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/dts-v1/;
> +
> +#include "3a-package.dtsi"
> +#include "rs780e-pch.dtsi"
> +
> +/ {
> + compatible = "loongson,ls3a3000-780e";
> +};
> diff --git a/arch/mips/boot/dts/loongson/3b-package.dtsi b/arch/mips/boot/dts/loongson/3b-package.dtsi
> new file mode 100644
> index 000000000000..af6e115d33c0
> --- /dev/null
> +++ b/arch/mips/boot/dts/loongson/3b-package.dtsi
Same comments apply to this file.
Looks like this one is pretty similar to 3a-package.dtsi. Can't you
share more?
> @@ -0,0 +1,69 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +#include <dt-bindings/interrupt-controller/irq.h>
> +
> +/ {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpuintc: interrupt-controller {
> + #address-cells = <0>;
> + #interrupt-cells = <1>;
> + interrupt-controller;
> + compatible = "mti,cpu-interrupt-controller";
> + };
> +
> + package@0 {
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <1>;
> + ranges = <0 0x1fe00000 0 0x1fe00000 0x100000
> + 0 0x3ff00000 0 0x3ff00000 0x100000
> + 0x1EFD 0xFB000000 0x1EFD 0xFB000000 0x10000000 /* 3B HT Config Space */>;
> +
> + iointc: interrupt-controller@3ff01400 {
> + compatible = "loongson,ls3-iointc";
> + reg = <0 0x3ff01400 0x64>;
> +
> + interrupt-controller;
> + #interrupt-cells = <2>;
> +
> + interrupt-parent = <&cpuintc>;
> + interrupts = <2>;
> + };
> +
> + cpu_uart0: serial@1fe001e0 {
> + device_type = "serial";
> + compatible = "ns16550a";
> + reg = <0 0x1fe001e0 0x8>;
> + clock-frequency = <33000000>;
> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-parent = <&iointc>;
> + no-loopback-test;
> + };
> +
> + cpu_uart1: serial@1fe001e8 {
> + status = "disabled";
> + device_type = "serial";
> + compatible = "ns16550a";
> + reg = <0 0x1fe001e8 0x8>;
> + clock-frequency = <33000000>;
> + interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-parent = <&iointc>;
> + no-loopback-test;
> + };
> +
> + htintc: interrupt-controller@0x1EFDFB000080 {
> + compatible = "loongson,ls3-htintc";
> + reg = <0x1EFD 0xFB000080 0x100>;
> + interrupt-controller;
> + #interrupt-cells = <1>;
> +
> + interrupt-parent = <&iointc>;
> + interrupts = <24 IRQ_TYPE_LEVEL_HIGH>,
> + <25 IRQ_TYPE_LEVEL_HIGH>,
> + <26 IRQ_TYPE_LEVEL_HIGH>,
> + <27 IRQ_TYPE_LEVEL_HIGH>;
> + };
> + };
> +};
> diff --git a/arch/mips/boot/dts/loongson/3b1x00_780e.dts b/arch/mips/boot/dts/loongson/3b1x00_780e.dts
> new file mode 100644
> index 000000000000..9b0dff0b1482
> --- /dev/null
> +++ b/arch/mips/boot/dts/loongson/3b1x00_780e.dts
> @@ -0,0 +1,10 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/dts-v1/;
> +
> +#include "3b-package.dtsi"
> +#include "rs780e-pch.dtsi"
> +
> +/ {
> + compatible = "loongson,ls3b-780e";
> +};
> diff --git a/arch/mips/boot/dts/loongson/Makefile b/arch/mips/boot/dts/loongson/Makefile
> new file mode 100644
> index 000000000000..a225d84a521e
> --- /dev/null
> +++ b/arch/mips/boot/dts/loongson/Makefile
> @@ -0,0 +1,5 @@
> +# SPDX_License_Identifier: GPL_2.0
> +dtb-$(CONFIG_MACH_LOONGSON64) += 3a1000_780e.dtb 3a2000_780e.dtb 3a3000_780e.dtb 3b1x00_780e.dtb \
> +
> +
> +obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
> diff --git a/arch/mips/boot/dts/loongson/rs780e-pch.dtsi b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
> new file mode 100644
> index 000000000000..915363eafa2f
> --- /dev/null
> +++ b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
> @@ -0,0 +1,35 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +/ {
> + pch {
bus@10000000
> + compatible = "simple-bus";
> + #address-cells = <2>;
> + #size-cells = <1>;
> + ranges = <0x000 0x10000000 0x000 0x10000000 0x10000000
> + 0x000 0x40000000 0x000 0x40000000 0x40000000>;
> +
> + isa {
This doesn't seem like it would be an accurate representation of the
h/w. I'd expect this would be behind a PCI bridge for example? How do
you identify a RS780E chip? Using the top level compatible is not the
right way to do it.
> + compatible = "isa";
> + #address-cells = <2>;
> + #size-cells = <1>;
> + ranges = <1 0 0 0 0x1000>;
> +
> + i8259: interrupt-controller@20 {
> + compatible = "intel,i8259";
> + interrupt-controller;
> + #interrupt-cells = <1>;
> + plat-poll;
> + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>,
> + <8>, <9>, <10>, <11>, <12>, <13>, <14>, <15>;
> + interrupt-parent = <&htintc>;
> + };
> +
> + rtc0: rtc@70 {
> + compatible = "motorola,mc146818";
> + reg = <1 0x70 0x8>;
> + interrupts = <8>;
> + interrupt-parent = <&i8259>;
> + };
> + };
> + };
> +};
> --
> 2.22.0
>
