[Patch v5 2/8] media: i2c: ov2659: Fix sensor detection to actually fail when device is not present

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Make sure that if the expected sensor device id register
is not recognized properly the failure is propagated
up so devices are not left partially initialized.

Signed-off-by: Benoit Parrot <bparrot@xxxxxx>
Signed-off-by: Jyri Sarha <jsarha@xxxxxx>
Acked-by: Lad, Prabhakar <prabhakar.csengg@xxxxxxxxx>
---
 drivers/media/i2c/ov2659.c | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c
index 17573257097d..efbe6dc720e2 100644
--- a/drivers/media/i2c/ov2659.c
+++ b/drivers/media/i2c/ov2659.c
@@ -1330,11 +1330,12 @@ static int ov2659_detect(struct v4l2_subdev *sd)
 		unsigned short id;
 
 		id = OV265X_ID(pid, ver);
-		if (id != OV2659_ID)
+		if (id != OV2659_ID) {
 			dev_err(&client->dev,
 				"Sensor detection failed (%04X, %d)\n",
 				id, ret);
-		else {
+			ret = -ENODEV;
+		} else {
 			dev_info(&client->dev, "Found OV%04X sensor\n", id);
 			ret = ov2659_init(sd, 0);
 		}
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux