This a collection of backlog patches I have been carrying for the VPE
driver.
It adds supports for SEQ_BT as well as NV21.
And fixes a number of issues both through v4l2-compliance and normal
usage.
======================================
v4l2-compliance SHA: 5b168dc8473911227890526bad26553d9e8ff81b, 32 bits
Compliance test for vpe device /dev/video0:
Driver Info:
Driver name : vpe
Card type : vpe
Bus info : platform:vpe
Driver version : 5.3.0
Capabilities : 0x84204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x04204000
Video Memory-to-Memory Multiplanar
Streaming
Extended Pix Format
Required ioctls:
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK (Not Supported)
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 0 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK (Not Supported)
test VIDIOC_DV_TIMINGS_CAP: OK (Not Supported)
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls:
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 1 Private Controls: 1
Format ioctls:
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK (Not Supported)
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK
test Composing: OK
test Scaling: OK
Codec ioctls:
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls:
warn: v4l2-test-buffers.cpp(683): VIDIOC_CREATE_BUFS not supported
warn: v4l2-test-buffers.cpp(683): VIDIOC_CREATE_BUFS not supported
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK
test Requests: OK (Not Supported)
Test input 0:
Streaming ioctls:
test read/write: OK (Not Supported)
test blocking wait: OK
Video Capture Multiplanar: Captured 58 buffers
test MMAP (no poll): OK
Video Capture Multiplanar: Captured 58 buffers
test MMAP (select): OK
Video Capture Multiplanar: Captured 58 buffers
test MMAP (epoll): OK
test USERPTR (no poll): OK (Not Supported)
test USERPTR (select): OK (Not Supported)
test DMABUF: Cannot test, specify --expbuf-device
Total for vpe device /dev/video0: 51, Succeeded: 51, Failed: 0, Warnings: 2
======================================
Benoit Parrot (13):
media: ti-vpe: vpe: Fix Motion Vector vpdma stride
media: ti-vpe: vpe: Add missing null pointer checks
media: ti-vpe: vpe: Remove unnecessary use of container_of
media: ti-vpe: vpe: fix a v4l2-compliance failure causing a kernel
panic
media: ti-vpe: vpe: fix a v4l2-compliance warning about invalid pixel
format
media: ti-vpe: vpe: Make sure YUYV is set as default format
media: ti-vpe: vpe: fix a v4l2-compliance failure about invalid
sizeimage
media: ti-vpe: vpe: fix a v4l2-compliance failure about frame sequence
number
media: ti-vpe: vpe: ensure buffers are cleaned up properly in abort
cases
media: ti-vpe: vpdma: Use fixed type for address in descriptor
media: ti-vpe: Set the DMA mask and coherent mask
media: ti-vpe: vpe: fix v4l2_compliance issue related to xfer_func
media: ti-vpe: vpe: don't rely on colorspace member for conversion
Nikhil Devshatwar (2):
media: ti-vpe: Add support for SEQ_BT
media: ti-vpe: Add support for NV21 format
Ram Prasad (1):
media: ti-vpe: Set MAX height supported to 2048 pixels
drivers/media/platform/ti-vpe/vpdma.c | 11 +-
drivers/media/platform/ti-vpe/vpdma.h | 2 +
drivers/media/platform/ti-vpe/vpdma_priv.h | 5 +-
drivers/media/platform/ti-vpe/vpe.c | 251 +++++++++++++++------
4 files changed, 192 insertions(+), 77 deletions(-)
--
2.17.1
