Re: [PATCH v10 05/14] media: tvp5150: add input source selection of_graph support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 8/30/19 12:16 PM, Marco Felsch wrote:
> This patch adds the of_graph support to describe the tvp input connections.
> Physical the TVP5150 has three ports: AIP1A, AIP1B and YOUT. As result
> of discussion [1],[2] the device-tree maps these ports 1:1. Look at the
> Documentation for more information. Since the TVP5150 is a converter/bridge
> the device-tree must contain at least 1-input and 1-output port. The
> mc-connectors and mc-links are only created if the device-tree contains the
> corresponding connector nodes. If more than one connector is available the
> media_entity_operations.link_setup() callback ensures that only one
> connector is active.
> 
> [1] https://www.spinics.net/lists/linux-media/msg138545.html
> [2] https://www.spinics.net/lists/linux-media/msg138546.html
> 
> Signed-off-by: Marco Felsch <m.felsch@xxxxxxxxxxxxxx>

More checkpatch warnings:

WARNING: line over 80 characters
#110: FILE: drivers/media/i2c/tvp5150.c:1244:
+                       is_svideo = decoder->connectors[i].base.type == V4L2_CONN_SVIDEO;

CHECK: No space is necessary after a cast
#157: FILE: drivers/media/i2c/tvp5150.c:1291:
+                       err = tvp5150_set_link((struct media_pad *) remote,

WARNING: line over 80 characters
#192: FILE: drivers/media/i2c/tvp5150.c:1466:
+               unsigned int port = decoder->connectors[i].base.links[0].remote_port;

WARNING: line over 80 characters
#194: FILE: drivers/media/i2c/tvp5150.c:1468:
+               bool is_svideo = decoder->connectors[i].base.type == V4L2_CONN_SVIDEO;

Here too adding a local pointer to decoder->connectors[i].base would
prevent these warnings, and make it more readable.

Regards,

	Hans

> ---
> Changelog:
> 
> [1] https://patchwork.kernel.org/cover/10794703/
> [2] https://patchwork.kernel.org/cover/10786553/
> 
> v8:
> - fix rebasing issue
> - fix error handling during tvp5150_registered()
> - adapt to new v4l2_connector_type enum
> 
> v7:
> - don't init enum tvp5150_pads with TVP5150_COMPOSITE0 functionality
> - break some 80 character limitation to improve readability
> - fix comment style -> always start with capital letters and end with dot
> - fix some minor style issues
> - fix tvp5150_registered error handling
> - simplify tvp5150_mc_init
> - make connectors static
>   -> since now only three connectors are possible (as described in DT)
>   -> drop tvp5150.endpoints storage
>   -> squash tvp5150_parse_dt and tvp5150_add_of_connectors
> - improve tvp5150_parse_dt:
>   -> make parsing stricter and fix not detected missconfigured dt-data
>   -> svideo must be connected now to port@[0,1]/endpoint@1
> 
> v6:
> - fix misspelled comments
> - use 'unsigned int' where it's possible
> - cleanup ifdef part-2:
>   * tvp5150_mc_init, tvp5150_add_of_connectors: add surrounding
>     CONFIG_MEDIA_CONTROLLER if def and stubs to improve quality
> - tvp5150_mc_init: uniform interface, use 'struct tvp5150' since all
>   internal function do this.
> - tvp5150_add_of_connectors: call within probe() to make it cleaner
> - tvp5150_parse_dt: move local loop vars within the loop.
> 
> v5:
> - Fixing build deps:
>   - tvp5150_mc_init: fix CONFIG_MEDIA_CONTROLLER deps
>   - struct tvp5150: drop CONFIG_MEDIA_CONTROLLER conditional property
>     includes. This leads into to complex deps for futher development.
>   - tvp5150_dt_cleanup: enable function only if CONFIG_OF is enabled
>   - tvp5150_parse_dt: enable function only if CONFIG_OF is enabled
>   - tvp5150_probe: call tvp5150_dt_cleanup only if CONFIG_OF is enabled
> 
> - Simplify link_setup routine:
>   - use generic connector parsing since both series [1,2] are squashed into
>     one
>   - struct tvp5150: drop pads_state and modify_second_link property
>     due to link_setup() rework.
>   - tvp5150_link_setup: add more comments
>   - tvp5150_link_setup: simply the link setup routine a lot. Edit the 2nd
>     link directly within the driver instead of a recursive media-framework
>     call (__media_entity_setup_link). This improves the readability and
>     shrinks the driver code.
>   - tvp5150_link_setup: disable all active links in case user switches
>     connectors without disable it first.
>   - tvp5150_registered: simplify default link enable path due to link_setup()
>     rework.
> 
> - General cleanups
>   - tvp5150_parse_dt: drop unecessary test
>   - tvp5150_parse_dt: add err message due to misconfiguration
>   - tvp5150_parse_dt: make use of V4L2_MBUS_UNKNOWN definition
>   - s/dev_dbg/dev_dbg_lvl
> 
> v4:
>  - rebase on top of media_tree/master, fix merge conflict due to commit
>    60359a28d592 ("media: v4l: fwnode: Initialise the V4L2 fwnode endpoints
>    to zero")
> 
> v3:
> - probe(): s/err/err_free_v4l2_ctrls
> - drop MC dependency for tvp5150_pads
> 
> v2:
> - adapt commit message
> - unify ifdef switches
> - rename tvp5150_valid_input -> tvp5150_of_valid_input, to be more precise
> - mc: use 2-input and 1-output pad
> - mc: link svideo connector to both input pads
> - mc: enable/disable svideo links in one go
> - mc: change link_setup() behaviour, switch the input src don't require a
>       explicite disable before.
> - mc: rename 'local' media_pad param to tvp5150_pad to avoid confusion
> - mc: enable link to the first available connector and set the
>       corresponding tvp5150 input src per default during registered()
> - mc/of: factor out oftree connector allocation
> - of: drop svideo dt port
> - of: move svideo connector to port@0/endpoint@1
> - of: require at least 1-in and 1-out endpoint
> 
>  drivers/media/i2c/tvp5150.c | 378 +++++++++++++++++++++++++++++++++---
>  1 file changed, 348 insertions(+), 30 deletions(-)
> 
> diff --git a/drivers/media/i2c/tvp5150.c b/drivers/media/i2c/tvp5150.c
> index 11a5fd7e2f58..477a929d4f89 100644
> --- a/drivers/media/i2c/tvp5150.c
> +++ b/drivers/media/i2c/tvp5150.c
> @@ -32,6 +32,8 @@
>  #define TVP5150_FIELD		V4L2_FIELD_ALTERNATE
>  #define TVP5150_COLORSPACE	V4L2_COLORSPACE_SMPTE170M
>  
> +#define TVP5150_MAX_CONNECTORS	3 /* Check dt-bindings for more information */
> +
>  MODULE_DESCRIPTION("Texas Instruments TVP5150A/TVP5150AM1/TVP5151 video decoder driver");
>  MODULE_AUTHOR("Mauro Carvalho Chehab");
>  MODULE_LICENSE("GPL v2");
> @@ -44,16 +46,25 @@ MODULE_PARM_DESC(debug, "Debug level (0-2)");
>  #define dprintk0(__dev, __arg...) dev_dbg_lvl(__dev, 0, 0, __arg)
>  
>  enum tvp5150_pads {
> -	TVP5150_PAD_IF_INPUT,
> +	TVP5150_PAD_AIP1A,
> +	TVP5150_PAD_AIP1B,
>  	TVP5150_PAD_VID_OUT,
>  	TVP5150_NUM_PADS
>  };
>  
> +struct tvp5150_connector {
> +	struct v4l2_fwnode_connector base;
> +	struct media_entity ent;
> +	struct media_pad pad;
> +};
> +
>  struct tvp5150 {
>  	struct v4l2_subdev sd;
> -#ifdef CONFIG_MEDIA_CONTROLLER
> +
>  	struct media_pad pads[TVP5150_NUM_PADS];
> -#endif
> +	struct tvp5150_connector connectors[TVP5150_MAX_CONNECTORS];
> +	unsigned int connectors_num;
> +
>  	struct v4l2_ctrl_handler hdl;
>  	struct v4l2_rect rect;
>  	struct regmap *regmap;
> @@ -1167,6 +1178,130 @@ static int tvp5150_enum_frame_size(struct v4l2_subdev *sd,
>  	return 0;
>  }
>  
> +/****************************************************************************
> + *			Media entity ops
> + ****************************************************************************/
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> +static int tvp5150_set_link(struct media_pad *connector_pad,
> +			    struct media_pad *tvp5150_pad, u32 flags)
> +{
> +	struct media_link *link;
> +
> +	link = media_entity_find_link(connector_pad, tvp5150_pad);
> +	if (!link)
> +		return -EINVAL;
> +
> +	link->flags = flags;
> +	link->reverse->flags = link->flags;
> +
> +	return 0;
> +}
> +
> +static int tvp5150_disable_all_input_links(struct tvp5150 *decoder)
> +{
> +	struct media_pad *connector_pad;
> +	unsigned int i;
> +	int err;
> +
> +	for (i = 0; i < TVP5150_NUM_PADS - 1; i++) {
> +		connector_pad = media_entity_remote_pad(&decoder->pads[i]);
> +		if (!connector_pad)
> +			continue;
> +
> +		err = tvp5150_set_link(connector_pad, &decoder->pads[i], 0);
> +		if (err)
> +			return err;
> +	}
> +
> +	return 0;
> +}
> +
> +static int tvp5150_s_routing(struct v4l2_subdev *sd, u32 input, u32 output,
> +			     u32 config);
> +
> +static int tvp5150_link_setup(struct media_entity *entity,
> +			      const struct media_pad *tvp5150_pad,
> +			      const struct media_pad *remote, u32 flags)
> +{
> +	struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity);
> +	struct tvp5150 *decoder = to_tvp5150(sd);
> +	struct media_pad *other_tvp5150_pad =
> +		&decoder->pads[tvp5150_pad->index ^ 1];
> +	bool is_svideo = false;
> +	unsigned int i;
> +	int err;
> +
> +	/*
> +	 * The TVP5150 state is determined by the enabled sink pad link(s).
> +	 * Enabling or disabling the source pad link has no effect.
> +	 */
> +	if (tvp5150_pad->flags & MEDIA_PAD_FL_SOURCE)
> +		return 0;
> +
> +	/* Check if the svideo connector should be enabled */
> +	for (i = 0; i < decoder->connectors_num; i++) {
> +		if (remote->entity == &decoder->connectors[i].ent) {
> +			is_svideo = decoder->connectors[i].base.type == V4L2_CONN_SVIDEO;
> +			break;
> +		}
> +	}
> +
> +	dev_dbg_lvl(sd->dev, 1, debug, "link setup '%s':%d->'%s':%d[%d]",
> +		    remote->entity->name, remote->index,
> +		    tvp5150_pad->entity->name, tvp5150_pad->index,
> +		    flags & MEDIA_LNK_FL_ENABLED);
> +	if (is_svideo)
> +		dev_dbg_lvl(sd->dev, 1, debug,
> +			    "link setup '%s':%d->'%s':%d[%d]",
> +			    remote->entity->name, remote->index,
> +			    other_tvp5150_pad->entity->name,
> +			    other_tvp5150_pad->index,
> +			    flags & MEDIA_LNK_FL_ENABLED);
> +
> +	/*
> +	 * The TVP5150 has an internal mux which allows the following setup:
> +	 *
> +	 * comp-connector1  --\
> +	 *		       |---> AIP1A
> +	 *		      /
> +	 * svideo-connector -|
> +	 *		      \
> +	 *		       |---> AIP1B
> +	 * comp-connector2  --/
> +	 *
> +	 * We can't rely on user space that the current connector gets disabled
> +	 * first before enabling the new connector. Disable all active
> +	 * connector links to be on the safe side.
> +	 */
> +	err = tvp5150_disable_all_input_links(decoder);
> +	if (err)
> +		return err;
> +
> +	tvp5150_s_routing(sd, is_svideo ? TVP5150_SVIDEO : tvp5150_pad->index,
> +			  flags & MEDIA_LNK_FL_ENABLED ? TVP5150_NORMAL :
> +			  TVP5150_BLACK_SCREEN, 0);
> +
> +	if (flags & MEDIA_LNK_FL_ENABLED) {
> +		/*
> +		 * S-Video connector is conneted to both ports AIP1A and AIP1B.
> +		 * Both links must be enabled in one-shot regardless which link
> +		 * the user requests.
> +		 */
> +		if (is_svideo) {
> +			err = tvp5150_set_link((struct media_pad *) remote,
> +					       other_tvp5150_pad, flags);
> +			if (err)
> +				return err;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct media_entity_operations tvp5150_sd_media_ops = {
> +	.link_setup = tvp5150_link_setup,
> +};
> +#endif
>  /****************************************************************************
>  			I2C Command
>   ****************************************************************************/
> @@ -1314,6 +1449,71 @@ static int tvp5150_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
>  	return 0;
>  }
>  
> +static int tvp5150_registered(struct v4l2_subdev *sd)
> +{
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> +	struct tvp5150 *decoder = to_tvp5150(sd);
> +	unsigned int i;
> +	int ret;
> +
> +	/*
> +	 * Setup connector pads and links. Enable the link to the first
> +	 * available connector per default.
> +	 */
> +	for (i = 0; i < decoder->connectors_num; i++) {
> +		struct media_entity *con = &decoder->connectors[i].ent;
> +		struct media_pad *pad = &decoder->connectors[i].pad;
> +		unsigned int port = decoder->connectors[i].base.links[0].remote_port;
> +		unsigned int flags = i ? 0 : MEDIA_LNK_FL_ENABLED;
> +		bool is_svideo = decoder->connectors[i].base.type == V4L2_CONN_SVIDEO;
> +
> +		pad->flags = MEDIA_PAD_FL_SOURCE;
> +		ret = media_entity_pads_init(con, 1, pad);
> +		if (ret < 0)
> +			goto err;
> +
> +		ret = media_device_register_entity(sd->v4l2_dev->mdev, con);
> +		if (ret < 0)
> +			goto err;
> +
> +		ret = media_create_pad_link(con, 0, &sd->entity, port, flags);
> +		if (ret < 0)
> +			goto err;
> +
> +		if (is_svideo) {
> +			/*
> +			 * Check tvp5150_link_setup() comments for more
> +			 * information.
> +			 */
> +			port = decoder->connectors[i].base.links[1].remote_port;
> +			ret = media_create_pad_link(con, 0, &sd->entity, port,
> +						    flags);
> +			if (ret < 0)
> +				goto err;
> +		}
> +
> +		/* Enable default input. */
> +		if (flags == MEDIA_LNK_FL_ENABLED) {
> +			decoder->input =
> +				is_svideo ? TVP5150_SVIDEO :
> +				port == 0 ? TVP5150_COMPOSITE0 :
> +				TVP5150_COMPOSITE1;
> +
> +			tvp5150_selmux(sd);
> +		}
> +	}
> +
> +	return 0;
> +
> +err:
> +	for (i = 0; i < decoder->connectors_num; i++)
> +		media_device_unregister_entity(&decoder->connectors[i].ent);
> +	return ret;
> +#endif
> +
> +	return 0;
> +}
> +
>  /* ----------------------------------------------------------------------- */
>  
>  static const struct v4l2_ctrl_ops tvp5150_ctrl_ops = {
> @@ -1367,6 +1567,10 @@ static const struct v4l2_subdev_ops tvp5150_ops = {
>  	.pad = &tvp5150_pad_ops,
>  };
>  
> +static const struct v4l2_subdev_internal_ops tvp5150_internal_ops = {
> +	.registered = tvp5150_registered,
> +};
> +
>  /****************************************************************************
>  			I2C Client & Driver
>   ****************************************************************************/
> @@ -1515,36 +1719,159 @@ static int tvp5150_init(struct i2c_client *c)
>  	return 0;
>  }
>  
> -static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
> +#if defined(CONFIG_MEDIA_CONTROLLER)
> +static int tvp5150_mc_init(struct tvp5150 *decoder)
>  {
> -	struct v4l2_fwnode_endpoint bus_cfg = { .bus_type = 0 };
> -	struct device_node *ep;
> -	unsigned int flags;
> -	int ret = 0;
> +	struct v4l2_subdev *sd = &decoder->sd;
> +	unsigned int i;
>  
> -	ep = of_graph_get_next_endpoint(np, NULL);
> -	if (!ep)
> -		return -EINVAL;
> +	sd->entity.ops = &tvp5150_sd_media_ops;
> +	sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
> +
> +	for (i = 0; i < TVP5150_NUM_PADS - 1; i++) {
> +		decoder->pads[i].flags = MEDIA_PAD_FL_SINK;
> +		decoder->pads[i].sig_type = PAD_SIGNAL_ANALOG;
> +	}
> +
> +	decoder->pads[i].flags = MEDIA_PAD_FL_SOURCE;
> +	decoder->pads[i].sig_type = PAD_SIGNAL_DV;
>  
> -	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep), &bus_cfg);
> +	return media_entity_pads_init(&sd->entity, TVP5150_NUM_PADS,
> +				      decoder->pads);
> +}
> +
> +#else /* !defined(CONFIG_MEDIA_CONTROLLER) */
> +
> +static inline int tvp5150_mc_init(struct tvp5150 *decoder)
> +{
> +	return 0;
> +}
> +#endif /* defined(CONFIG_MEDIA_CONTROLLER) */
> +
> +static int
> +tvp5150_add_connector(struct tvp5150 *decoder, struct device_node *np,
> +		      unsigned int portn, unsigned int epn, unsigned int svideo)
> +{
> +	struct device *dev = decoder->sd.dev;
> +	struct device_node *ep_np, *remote_np;
> +	struct v4l2_fwnode_connector *vc;
> +	struct tvp5150_connector *c;
> +	unsigned int next_connector = decoder->connectors_num;
> +	int ret;
> +
> +	/* Get free connector entry. */
> +	if (next_connector >= TVP5150_MAX_CONNECTORS)
> +		return 0;
> +
> +	c = &decoder->connectors[next_connector];
> +	vc = &c->base;
> +	ep_np = of_graph_get_endpoint_by_regs(np, portn, epn);
> +	remote_np = of_graph_get_remote_port_parent(ep_np);
> +
> +	ret = v4l2_fwnode_connector_alloc_parse(of_fwnode_handle(ep_np), vc);
>  	if (ret)
>  		goto err;
>  
> -	flags = bus_cfg.bus.parallel.flags;
> +	if ((!svideo && vc->type != V4L2_CONN_COMPOSITE) ||
> +	    (svideo && vc->type != V4L2_CONN_SVIDEO)) {
> +		dev_err(dev, "Invalid connector type for port@%u/endpoint@%u\n",
> +			portn, epn);
> +		ret = -EINVAL;
> +		goto err;
> +	}
>  
> +	if (svideo &&
> +	    (vc->nr_of_links != 2 ||
> +	     vc->links[0].remote_port == vc->links[1].remote_port)) {
> +		dev_err(dev, "Invalid Svideo connector configuration\n");
> +		ret = -EINVAL;
> +		goto err;
> +	}
> +
> +	c->ent.flags = MEDIA_ENT_FL_CONNECTOR;
> +	c->ent.name = vc->label;
> +	c->ent.name = kasprintf(GFP_KERNEL, "%s %s", remote_np->name,
> +				vc->label ? vc->label : "");
> +	c->ent.function = vc->type == V4L2_CONN_SVIDEO ?
> +		MEDIA_ENT_F_CONN_SVIDEO : MEDIA_ENT_F_CONN_COMPOSITE;
> +
> +	decoder->connectors_num++;
> +
> +	of_node_put(remote_np);
> +	of_node_put(ep_np);
> +	return 0;
> +
> +err:
> +	of_node_put(remote_np);
> +	of_node_put(ep_np);
> +	v4l2_fwnode_connector_free(vc);
> +	return ret;
> +}
> +
> +static int tvp5150_parse_dt(struct tvp5150 *decoder, struct device_node *np)
> +{
> +	struct device *dev = decoder->sd.dev;
> +	struct device_node *ep_np;
> +	struct v4l2_fwnode_endpoint bus_cfg = {
> +		.bus_type = V4L2_MBUS_UNKNOWN
> +	};
> +	unsigned int flags, ep_num;
> +	int ret;
> +
> +	/* At least 1 output and 1 input. */
> +	ep_num = of_graph_get_endpoint_count(np);
> +	if (ep_num < 2 || ep_num > 5) {
> +		dev_err(dev, "At least 1 input and 1 output must be connected to the device.\n");
> +		return -EINVAL;
> +	}
> +
> +	/* Layout if all connectors are used
> +	 *
> +	 * tvp-5150 port@0 (AIP1A)
> +	 *	endpoint@0 -----------> Comp0-Con  port
> +	 *	endpoint@1 --------+--> Svideo-Con port
> +	 * tvp-5150 port@1 (AIP1B) |
> +	 *	endpoint@1 --------+
> +	 *	endpoint@0 -----------> Comp1-Con  port
> +	 * tvp-5150 port@2
> +	 *	endpoint (video bitstream output at YOUT[0-7] parallel bus)
> +	 */
> +	for_each_endpoint_of_node(np, ep_np) {
> +		struct of_endpoint ep;
> +
> +		of_graph_parse_endpoint(ep_np, &ep);
> +		if (ep.port > 1)
> +			continue;
> +
> +		ret = tvp5150_add_connector(decoder, np, ep.port, ep.id,
> +					    ep.id ? 1 : 0);
> +		if (ret) {
> +			of_node_put(ep_np);
> +			return ret;
> +		}
> +	}
> +
> +	ep_np = of_graph_get_endpoint_by_regs(np, TVP5150_PAD_VID_OUT, 0);
> +	if (!ep_np) {
> +		dev_err(dev, "Error no output endpoint available\n");
> +		return -EINVAL;
> +	}
> +	ret = v4l2_fwnode_endpoint_parse(of_fwnode_handle(ep_np), &bus_cfg);
> +	of_node_put(ep_np);
> +	if (ret)
> +		return ret;
> +
> +	flags = bus_cfg.bus.parallel.flags;
>  	if (bus_cfg.bus_type == V4L2_MBUS_PARALLEL &&
>  	    !(flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH &&
>  	      flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH &&
>  	      flags & V4L2_MBUS_FIELD_EVEN_LOW)) {
> -		ret = -EINVAL;
> -		goto err;
> +		return -EINVAL;
>  	}
>  
>  	decoder->mbus_type = bus_cfg.bus_type;
>  
> -err:
> -	of_node_put(ep);
> -	return ret;
> +	return decoder->connectors_num ? 0 : -ENODEV;
>  }
>  
>  static const char * const tvp5150_test_patterns[2] = {
> @@ -1592,22 +1919,13 @@ static int tvp5150_probe(struct i2c_client *c)
>  	}
>  
>  	v4l2_i2c_subdev_init(sd, c, &tvp5150_ops);
> +	sd->internal_ops = &tvp5150_internal_ops;
>  	sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
>  
> -#if defined(CONFIG_MEDIA_CONTROLLER)
> -	core->pads[TVP5150_PAD_IF_INPUT].flags = MEDIA_PAD_FL_SINK;
> -	core->pads[TVP5150_PAD_IF_INPUT].sig_type = PAD_SIGNAL_ANALOG;
> -	core->pads[TVP5150_PAD_VID_OUT].flags = MEDIA_PAD_FL_SOURCE;
> -	core->pads[TVP5150_PAD_VID_OUT].sig_type = PAD_SIGNAL_DV;
> -
> -	sd->entity.function = MEDIA_ENT_F_ATV_DECODER;
> -
> -	res = media_entity_pads_init(&sd->entity, TVP5150_NUM_PADS, core->pads);
> -	if (res < 0)
> +	res = tvp5150_mc_init(core);
> +	if (res)
>  		return res;
>  
> -#endif
> -
>  	res = tvp5150_detect_version(core);
>  	if (res < 0)
>  		return res;
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux