Hi
> On Tue, Sep 24, 2019 at 06:52:35PM +0800, Shengjiu Wang wrote:
> > There is error "aplay: pcm_write:2023: write error: Input/output error"
> > on i.MX8QM/i.MX8QXP platform for S24_3LE format.
> >
> > In i.MX8QM/i.MX8QXP, the DMA is EDMA, which don't support 24bit
> > sample, but we didn't add any constraint, that cause issues.
> >
> > So we need to query the caps of dma, then update the hw parameters
> > according to the caps.
> >
> > Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
> > ---
> > sound/soc/fsl/fsl_asrc.c | 4 +--
> > sound/soc/fsl/fsl_asrc.h | 3 ++
> > sound/soc/fsl/fsl_asrc_dma.c | 59
> > +++++++++++++++++++++++++++++++-----
> > 3 files changed, 56 insertions(+), 10 deletions(-)
> >
> > @@ -270,12 +268,17 @@ static int fsl_asrc_dma_hw_free(struct
> > snd_pcm_substream *substream)
> >
> > static int fsl_asrc_dma_startup(struct snd_pcm_substream *substream)
> > {
> > + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
> > struct snd_soc_pcm_runtime *rtd = substream->private_data;
> > struct snd_pcm_runtime *runtime = substream->runtime;
> > struct snd_soc_component *component =
> snd_soc_rtdcom_lookup(rtd,
> > DRV_NAME);
> > + struct snd_dmaengine_dai_dma_data *dma_data;
> > struct device *dev = component->dev;
> > struct fsl_asrc *asrc_priv = dev_get_drvdata(dev);
> > struct fsl_asrc_pair *pair;
> > + struct dma_chan *tmp_chan = NULL;
> > + u8 dir = tx ? OUT : IN;
> > + int ret = 0;
> >
> > pair = kzalloc(sizeof(struct fsl_asrc_pair), GFP_KERNEL);
>
> Sorry, I didn't catch it previously. We would need to release this memory
> also for all error-out paths, as the code doesn't have any error-out routine,
> prior to applying this change.
>
> > if (!pair)
> > @@ -285,11 +288,51 @@ static int fsl_asrc_dma_startup(struct
> > snd_pcm_substream *substream)
>
> > + /* Request a dummy pair, which will be released later.
> > + * Request pair function needs channel num as input, for this
> > + * dummy pair, we just request "1" channel temporary.
> > + */
>
> "temporary" => "temporarily"
>
> > + ret = fsl_asrc_request_pair(1, pair);
> > + if (ret < 0) {
> > + dev_err(dev, "failed to request asrc pair\n");
> > + return ret;
> > + }
> > +
> > + /* Request a dummy dma channel, which will be release later. */
>
> "release" => "released"
Ok, will update them.
Best regards
Wang shengjiu
