Re: [PATCH] arm: dts: am43x-clock: add tbclk data for ehrpwm.

[Tero Kristo <t-kristo@xxxxxx>]

On 04/25/2014 08:42 AM, sourav wrote:
> Hi Tero,
>
> On Tuesday 22 April 2014 06:11 PM, Tero Kristo wrote:
> > On 04/22/2014 01:25 PM, Sourav Poddar wrote:
> > > We need "tblclk" clock data for the functioning of ehrpwm
> > > module. Hence, populating the required clock information
> > > in clock dts file.
> > >
> > > Signed-off-by: Sourav Poddar <sourav.poddar@xxxxxx>
> > > ---
> > >   arch/arm/boot/dts/am43xx-clocks.dtsi |   84
> > > ++++++++++++++++++++++++++++++++++
> > >   drivers/clk/ti/clk-43xx.c            |    6 +++
> > >   2 files changed, 90 insertions(+)
> > >
> > > diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi
> > > b/arch/arm/boot/dts/am43xx-clocks.dtsi
> > > index 142009c..869f9a5 100644
> > > --- a/arch/arm/boot/dts/am43xx-clocks.dtsi
> > > +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
> > > @@ -87,6 +87,90 @@
> > >           clock-mult = <1>;
> > >           clock-div = <1>;
> > >       };
> > > +
> > > +    ehrpwm0_gate_tbclk: ehrpwm0_gate_tbclk {
> > > +        #clock-cells = <0>;
> > > +        compatible = "ti,composite-no-wait-gate-clock";
> > > +        clocks = <&dpll_per_m2_ck>;
> > > +        ti,bit-shift = <0>;
> > > +        reg = <0x0664>;
> > > +    };
> > > +
> > > +    ehrpwm0_tbclk: ehrpwm0_tbclk {
> > > +        #clock-cells = <0>;
> > > +        compatible = "ti,composite-clock";
> > > +        clocks = <&ehrpwm0_gate_tbclk>;
> > > +    };
> >
> > Why do you use composite-clock type here? I see only add one sub-clock
> > to the composite, thus the composite part is unused. How about using a
> > gate-clock type only? Same question applies for the rest of the patch
> > also.
>
> Yes, I though of doing so and I think it should be fine to use
> gate-clock only. I did this following the ehrpwm clock data in
> "am33xx-clock.dtsi" file, where we use composite clock for ehrpwm. I
> think it needs to be changed there also.?

Yeah, that seems to be a quirk that was generated by the automatic 
conversion script, there is no reason for these being composite clocks 
either.

-Tero

> -Sourav
> > -Tero
> >
> > > +
> > > +    ehrpwm1_gate_tbclk: ehrpwm1_gate_tbclk {
> > > +        #clock-cells = <0>;
> > > +        compatible = "ti,composite-no-wait-gate-clock";
> > > +        clocks = <&dpll_per_m2_ck>;
> > > +        ti,bit-shift = <1>;
> > > +        reg = <0x0664>;
> > > +    };
> > > +
> > > +    ehrpwm1_tbclk: ehrpwm1_tbclk {
> > > +        #clock-cells = <0>;
> > > +        compatible = "ti,composite-clock";
> > > +        clocks = <&ehrpwm1_gate_tbclk>;
> > > +    };
> > > +
> > > +    ehrpwm2_gate_tbclk: ehrpwm2_gate_tbclk {
> > > +        #clock-cells = <0>;
> > > +        compatible = "ti,composite-no-wait-gate-clock";
> > > +        clocks = <&dpll_per_m2_ck>;
> > > +        ti,bit-shift = <2>;
> > > +        reg = <0x0664>;
> > > +    };
> > > +
> > > +    ehrpwm2_tbclk: ehrpwm2_tbclk {
> > > +        #clock-cells = <0>;
> > > +        compatible = "ti,composite-clock";
> > > +        clocks = <&ehrpwm2_gate_tbclk>;
> > > +    };
> > > +
> > > +    ehrpwm3_gate_tbclk: ehrpwm3_gate_tbclk {
> > > +        #clock-cells = <0>;
> > > +        compatible = "ti,composite-no-wait-gate-clock";
> > > +        clocks = <&dpll_per_m2_ck>;
> > > +        ti,bit-shift = <2>;
> > > +        reg = <0x0664>;
> > > +    };
> > > +
> > > +    ehrpwm3_tbclk: ehrpwm3_tbclk {
> > > +        #clock-cells = <0>;
> > > +        compatible = "ti,composite-clock";
> > > +        clocks = <&ehrpwm3_gate_tbclk>;
> > > +    };
> > > +
> > > +    ehrpwm4_gate_tbclk: ehrpwm4_gate_tbclk {
> > > +        #clock-cells = <0>;
> > > +        compatible = "ti,composite-no-wait-gate-clock";
> > > +        clocks = <&dpll_per_m2_ck>;
> > > +        ti,bit-shift = <2>;
> > > +        reg = <0x0664>;
> > > +    };
> > > +
> > > +    ehrpwm4_tbclk: ehrpwm4_tbclk {
> > > +        #clock-cells = <0>;
> > > +        compatible = "ti,composite-clock";
> > > +        clocks = <&ehrpwm4_gate_tbclk>;
> > > +    };
> > > +
> > > +    ehrpwm5_gate_tbclk: ehrpwm5_gate_tbclk {
> > > +        #clock-cells = <0>;
> > > +        compatible = "ti,composite-no-wait-gate-clock";
> > > +        clocks = <&dpll_per_m2_ck>;
> > > +        ti,bit-shift = <2>;
> > > +        reg = <0x0664>;
> > > +    };
> > > +
> > > +    ehrpwm5_tbclk: ehrpwm5_tbclk {
> > > +        #clock-cells = <0>;
> > > +        compatible = "ti,composite-clock";
> > > +        clocks = <&ehrpwm5_gate_tbclk>;
> > > +    };
> > >   };
> > > &prcm_clocks {
> > >       clk_32768_ck: clk_32768_ck {
> > > diff --git a/drivers/clk/ti/clk-43xx.c b/drivers/clk/ti/clk-43xx.c
> > > index 67c8de5..5413a6a 100644
> > > --- a/drivers/clk/ti/clk-43xx.c
> > > +++ b/drivers/clk/ti/clk-43xx.c
> > > @@ -105,6 +105,12 @@ static struct ti_dt_clk am43xx_clks[] = {
> > >       DT_CLK(NULL, "func_12m_clk", "func_12m_clk"),
> > >       DT_CLK(NULL, "vtp_clk_div", "vtp_clk_div"),
> > >       DT_CLK(NULL, "usbphy_32khz_clkmux", "usbphy_32khz_clkmux"),
> > > +    DT_CLK("48300200.ehrpwm", "tbclk", "ehrpwm0_tbclk"),
> > > +    DT_CLK("48302200.ehrpwm", "tbclk", "ehrpwm1_tbclk"),
> > > +    DT_CLK("48304200.ehrpwm", "tbclk", "ehrpwm2_tbclk"),
> > > +    DT_CLK("48306200.ehrpwm", "tbclk", "ehrpwm0_tbclk"),
> > > +    DT_CLK("48308200.ehrpwm", "tbclk", "ehrpwm1_tbclk"),
> > > +    DT_CLK("4830a200.ehrpwm", "tbclk", "ehrpwm2_tbclk"),
> > >       { .node_name = NULL },
> > >   };

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html