[PATCH AUTOSEL 5.3 74/87] ARM: dts: dir685: Drop spi-cpol from the display

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Linus Walleij <linus.walleij@xxxxxxxxxx>

[ Upstream commit 2a7326caab479ca257c4b9bd67db42d1d49079bf ]

The D-Link DIR-685 had its clock polarity set as active
low using the special SPI "spi-cpol" property.

This is not correct: the datasheet clearly states:
"Fix SCL to GND level when not in use" which is
indicative that this line is active high.

After a recent fix making the GPIO-based SPI driver
force the clock line de-asserted at the beginning of
each SPI transaction this reared its ugly head: now
de-asserted was taken to mean the line should be
driven high, but it should be driven low.

Fix this up in the DTS file and the display works again.

Link: https://lore.kernel.org/r/20190915135444.11066-1-linus.walleij@xxxxxxxxxx
Cc: Mark Brown <broonie@xxxxxxxxxx>
Fixes: 2922d1cc1696 ("spi: gpio: Add SPI_MASTER_GPIO_SS flag")
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
 arch/arm/boot/dts/gemini-dlink-dir-685.dts | 1 -
 1 file changed, 1 deletion(-)

diff --git a/arch/arm/boot/dts/gemini-dlink-dir-685.dts b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
index bfaa2de63a100..e2030ba16512f 100644
--- a/arch/arm/boot/dts/gemini-dlink-dir-685.dts
+++ b/arch/arm/boot/dts/gemini-dlink-dir-685.dts
@@ -72,7 +72,6 @@
 			reg = <0>;
 			/* 50 ns min period = 20 MHz */
 			spi-max-frequency = <20000000>;
-			spi-cpol; /* Clock active low */
 			vcc-supply = <&vdisp>;
 			iovcc-supply = <&vdisp>;
 			vci-supply = <&vdisp>;
-- 
2.20.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux