Rob
On 9/23/19 4:42 PM, Jacek Anaszewski wrote:
Dan,
On 9/23/19 5:28 PM, Dan Murphy wrote:
Jacek
On 9/21/19 10:13 AM, Jacek Anaszewski wrote:
Dan,
On 9/20/19 7:41 PM, Dan Murphy wrote:
Introduce the bindings for the Texas Instruments LP5036, LP5030, LP5024,
LP5018, LP5012 and LP5009 RGB LED device driver. The
LP5036/30/24/18/12/9
can control RGB LEDs individually or as part of a control bank group.
These devices have the ability to adjust the mixing control for the RGB
LEDs to obtain different colors independent of the overall brightness of
the LED grouping.
Datasheet:
http://www.ti.com/lit/ds/symlink/lp5012.pdf
http://www.ti.com/lit/ds/symlink/lp5024.pdf
http://www.ti.com/lit/ds/symlink/lp5036.pdf
Signed-off-by: Dan Murphy <dmurphy@xxxxxx>
---
.../devicetree/bindings/leds/leds-lp50xx.txt | 148 ++++++++++++++++++
1 file changed, 148 insertions(+)
create mode 100644
Documentation/devicetree/bindings/leds/leds-lp50xx.txt
diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.txt
b/Documentation/devicetree/bindings/leds/leds-lp50xx.txt
new file mode 100644
index 000000000000..9d05f43042e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.txt
@@ -0,0 +1,148 @@
+* Texas Instruments - LP5009/12/18/24/30/36 RGB LED driver
+
+The LP50XX is multi-channel, I2C RGB LED Drivers that can group RGB
LEDs into
+a LED group or control them individually.
+
+The difference in these RGB LED drivers is the number of supported
RGB modules.
+
+Required parent properties:
+ - compatible:
+ "ti,lp5009"
+ "ti,lp5012"
+ "ti,lp5018"
+ "ti,lp5024"
+ "ti,lp5030"
+ "ti,lp5036"
+ - reg : I2C slave address
+ lp5009/12 - 0x28
+ lp5018/24 - 0x28
+ lp5030/36 - 0x30
+ - #address-cells : 1
+ - #size-cells : 0
+
+Optional parent properties:
+ - enable-gpios : gpio pin to enable/disable the device.
+ - vled-supply : LED supply
+
+Required child properties:
+ - #address-cells : 1
+ - #size-cells : 0
+ - reg : This is the LED module number.
+ - color : see Documentation/devicetree/bindings/leds/common.txt
+ - function : see Documentation/devicetree/bindings/leds/common.txt
+
+Required child properties only is LED modules will be banked:
+ - ti,led-bank : This property denotes the LED module numbers
that will
+ be controlled as a single RGB cluster. Each LED module
+ number will be controlled by a single LED class instance.
+ There can only be one instance of the ti,led-bank
+ property for each device node.
+
+Required grandchildren properties:
+ - reg : A single entry denoting the LED module that controls
+ the RGB cluster.
+ - color : see
Documentation/devicetree/bindings/leds/leds-multicolor.txt
+ - led-sources : see
Documentation/devicetree/bindings/leds/common.txt
+
+The LED outputs associated with the LED modules are defined in Table
1 of the
+corresponding data sheets.
We must enclose this information here.
That will make this doc pretty messy especially with the LP5036 entries.
I would have to do ascii art to make it understandable and basically
there is not a delta in the lesser devices in the outputs
I don't see value in reproducing this data sheet contents in the
dt-bindings.
IMO DT bindings should be self-contained. We cannot assume that
user will always have Internet access.
For example (LP5012) and then for the LP5036 multiply this by 3
Table 1.
Bank Number and LED Number Assignment
OUT NUMBER BANK NUMBER RGB LED MODULE NUMBER
OUT0 Bank A
OUT1 Bank B LED0
OUT2 Bank C
OUT3 Bank A
OUT4 Bank B LED1
OUT5 Bank C
OUT6 Bank A
OUT7 Bank B LED2
OUT8 Bank C
OUT9 (LP5012 only) Bank A
OUT10 (LP5012 only) Bank B LED3
OUT11 (LP5012 only) Bank C
I'd say it is required. But let's wait for DT guys' opinion.
Do you have an opinion on whether we need to publish in the DT the
output to module map?
This is the last item I have to fix before submitting v9.
Dan
+
+LP5009 - 2 Total RGB cluster LED outputs 0-1
This should be 3 total not 2
Dan
+LP5012 - 4 Total RGB cluster LED outputs 0-3
+LP5018 - 6 Total RGB cluster LED outputs 0-5
+LP5024 - 8 Total RGB cluster LED outputs 0-7
+LP5030 - 10 Total RGB cluster LED outputs 0-9
+LP5036 - 12 Total RGB cluster LED outputs 0-11
+
+Optional child properties:
+ - label : see Documentation/devicetree/bindings/leds/common.txt
+ - linux,default-trigger :
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Examples:
+led-controller@29 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,lp5024";
+ reg = <0x29>;
+ enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ vled-supply = <&vmmcsd_fixed>;
+
+ multi-led@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_STATUS;
+
+ led@3 {
+ reg = <3>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@4 {
+ reg = <4>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@5 {
+ reg = <5>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+
+ multi-led@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <2>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_STANDBY;
+ ti,led-bank = <2 3 5>;
+
+ led@6 {
+ reg = <0x6>;
+ color = <LED_COLOR_ID_RED>;
+ led-sources = <6 9 15>;
+ };
+
+ led@7 {
+ reg = <0x7>;
+ color = <LED_COLOR_ID_GREEN>;
+ led-sources = <7 10 16>;
+ };
+
+ led@8 {
+ reg = <0x8>;
+ color = <LED_COLOR_ID_BLUE>;
+ led-sources = <8 11 17>;
+ };
+ };
+
+ multi-led@4 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <4>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_ACTIVITY;
+
+ led@12 {
+ reg = <12>;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@13 {
+ reg = <13>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@14 {
+ reg = <14>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+};
+
+For more product information please see the link below:
+http://www.ti.com/lit/ds/symlink/lp5012.pdf
+http://www.ti.com/lit/ds/symlink/lp5024.pdf
+http://www.ti.com/lit/ds/symlink/lp5036.pdf
