This patchset adds support for the Ugoos AM6, an Android STB based on the Amlogic W400 reference design with the S922X chipset. v2: correction of minor nits v3: address regulator and GPIO corrections from Neil Armstrong (using schematic excerpts from Ugoos) and related v2 comments from Martin Blumenstingle. Add acks on patches 1/2 from Rob Herring. v4: address nits from Martin except for the vcc_3v3 node as it's not known how to handle the vcc_3v3 regulator managed by ATF firmware, so it remains untouched/undeclared like other g12a/g12b/sm1 boards. Christian Hewitt (3): dt-bindings: Add vendor prefix for Ugoos dt-bindings: arm: amlogic: Add support for the Ugoos AM6 arm64: dts: meson-g12b-ugoos-am6: add initial device-tree Documentation/devicetree/bindings/arm/amlogic.yaml | 1 + .../devicetree/bindings/vendor-prefixes.yaml | 2 + arch/arm64/boot/dts/amlogic/Makefile | 1 + .../boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 557 +++++++++++++++++++++ 4 files changed, 561 insertions(+) create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts -- 2.7.4
