From: André Draszik <git@xxxxxxxxxx> [ Upstream commit 9846a4524ac90b63496580b7ad50674b40d92a8f ] Recent changes to the atheros at803x driver caused ethernet to stop working on this board. In particular commit 6d4cd041f0af ("net: phy: at803x: disable delay only for RGMII mode") and commit cd28d1d6e52e ("net: phy: at803x: Disable phy delay for RGMII mode") fix the AR8031 driver to configure the phy's (RX/TX) delays as per the 'phy-mode' in the device tree. This now prevents ethernet from working on this board. It used to work before those commits, because the AR8031 comes out of reset with RX delay enabled, and the at803x driver didn't touch the delay configuration at all when "rgmii" mode was selected, and because arch/arm/mach-imx/mach-imx7d.c:ar8031_phy_fixup() unconditionally enables TX delay. Since above commits ar8031_phy_fixup() also has no effect anymore, and the end-result is that all delays are disabled in the phy, no ethernet. Update the device tree to restore functionality. Signed-off-by: André Draszik <git@xxxxxxxxxx> CC: Ilya Ledvich <ilya@xxxxxxxxxxxxxx> CC: Igor Grinberg <grinberg@xxxxxxxxxxxxxx> CC: Rob Herring <robh+dt@xxxxxxxxxx> CC: Mark Rutland <mark.rutland@xxxxxxx> CC: Shawn Guo <shawnguo@xxxxxxxxxx> CC: Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> CC: Pengutronix Kernel Team <kernel@xxxxxxxxxxxxxx> CC: Fabio Estevam <festevam@xxxxxxxxx> CC: NXP Linux Team <linux-imx@xxxxxxx> CC: devicetree@xxxxxxxxxxxxxxx CC: linux-arm-kernel@xxxxxxxxxxxxxxxxxxx Signed-off-by: Shawn Guo <shawnguo@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/arm/boot/dts/imx7d-cl-som-imx7.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts index 3cc1fb9ce4418..60a28281d3d16 100644 --- a/arch/arm/boot/dts/imx7d-cl-som-imx7.dts +++ b/arch/arm/boot/dts/imx7d-cl-som-imx7.dts @@ -43,7 +43,7 @@ <&clks IMX7D_ENET1_TIME_ROOT_CLK>; assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; assigned-clock-rates = <0>, <100000000>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy0>; fsl,magic-packet; status = "okay"; @@ -69,7 +69,7 @@ <&clks IMX7D_ENET2_TIME_ROOT_CLK>; assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>; assigned-clock-rates = <0>, <100000000>; - phy-mode = "rgmii"; + phy-mode = "rgmii-id"; phy-handle = <ðphy1>; fsl,magic-packet; status = "okay"; -- 2.20.1