Hello Shengjiu,
One issue for error-out and some nit-pickings inline. Thanks.
On Thu, Sep 19, 2019 at 08:11:42PM +0800, Shengjiu Wang wrote:
> There is error "aplay: pcm_write:2023: write error: Input/output error"
> on i.MX8QM/i.MX8QXP platform for S24_3LE format.
>
> In i.MX8QM/i.MX8QXP, the DMA is EDMA, which don't support 24bit
> sample, but we didn't add any constraint, that cause issues.
>
> So we need to query the caps of dma, then update the hw parameters
> according to the caps.
>
> Signed-off-by: Shengjiu Wang <shengjiu.wang@xxxxxxx>
> ---
> sound/soc/fsl/fsl_asrc.c | 4 +--
> sound/soc/fsl/fsl_asrc.h | 3 +++
> sound/soc/fsl/fsl_asrc_dma.c | 52 +++++++++++++++++++++++++++++++-----
> 3 files changed, 50 insertions(+), 9 deletions(-)
>
> @@ -276,6 +274,11 @@ static int fsl_asrc_dma_startup(struct snd_pcm_substream *substream)
> struct device *dev = component->dev;
> struct fsl_asrc *asrc_priv = dev_get_drvdata(dev);
> struct fsl_asrc_pair *pair;
> + bool tx = substream->stream == SNDRV_PCM_STREAM_PLAYBACK;
> + u8 dir = tx ? OUT : IN;
> + struct dma_chan *tmp_chan;
> + struct snd_dmaengine_dai_dma_data *dma_data;
Nit: would it be possible to reorganize these a bit? Usually
we put struct things together unless there is a dependency,
similar to fsl_asrc_dma_hw_params().
> @@ -285,9 +288,44 @@ static int fsl_asrc_dma_startup(struct snd_pcm_substream *substream)
>
> runtime->private_data = pair;
>
> + /* Request a temp pair, which is release in the end */
Nit: "which will be released later" or "and will release it
later"? And could we use a work like "dummy"? Or at least I
would love to see the comments explaining the parameter "1"
in the function call below.
> + ret = fsl_asrc_request_pair(1, pair);
> + if (ret < 0) {
> + dev_err(dev, "failed to request asrc pair\n");
> + return ret;
> + }
> +
> + tmp_chan = fsl_asrc_get_dma_channel(pair, dir);
> + if (!tmp_chan) {
> + dev_err(dev, "can't get dma channel\n");
Could we align with other error messages using "failed to"?
> + ret = snd_soc_set_runtime_hwparams(substream, &snd_imx_hardware);
> + if (ret)
> + return ret;
> +
[...]
> + dma_release_channel(tmp_chan);
> + fsl_asrc_release_pair(pair);
I think we need an "out:" here for those error-out routines
to goto. Otherwise, it'd be a pair leak?
> +
Could we drop this? There is a blank line below already :)
>
> return 0;
> }
> --
> 2.21.0
>
