Register upper-lower interrupts for each of the two tsens controllers.
Signed-off-by: Amit Kucheria <amit.kucheria@xxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 82 ++++++++++++++-------------
1 file changed, 42 insertions(+), 40 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index c13ed7aeb1e0..1e2f77b38f2c 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -440,8 +440,8 @@
thermal-zones {
cpu0-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 1>;
@@ -461,8 +461,8 @@
};
cpu1-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 2>;
@@ -482,8 +482,8 @@
};
cpu2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 3>;
@@ -503,8 +503,8 @@
};
cpu3-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 4>;
@@ -524,8 +524,8 @@
};
cpu4-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 7>;
@@ -545,8 +545,8 @@
};
cpu5-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 8>;
@@ -566,8 +566,8 @@
};
cpu6-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 9>;
@@ -587,8 +587,8 @@
};
cpu7-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 10>;
@@ -608,8 +608,8 @@
};
gpu-thermal-bottom {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 12>;
@@ -623,8 +623,8 @@
};
gpu-thermal-top {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 13>;
@@ -638,8 +638,8 @@
};
clust0-mhm-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 5>;
@@ -653,8 +653,8 @@
};
clust1-mhm-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 6>;
@@ -668,8 +668,8 @@
};
cluster1-l2-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens0 11>;
@@ -683,8 +683,8 @@
};
modem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens1 1>;
@@ -698,8 +698,8 @@
};
mem-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens1 2>;
@@ -713,8 +713,8 @@
};
wlan-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens1 3>;
@@ -728,8 +728,8 @@
};
q6-dsp-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens1 4>;
@@ -743,8 +743,8 @@
};
camera-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens1 5>;
@@ -758,8 +758,8 @@
};
multimedia-thermal {
- polling-delay-passive = <250>;
- polling-delay = <1000>;
+ polling-delay-passive = <0>;
+ polling-delay = <0>;
thermal-sensors = <&tsens1 6>;
@@ -845,8 +845,9 @@
compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
reg = <0x10ab000 0x1000>, /* TM */
<0x10aa000 0x1000>; /* SROT */
-
#qcom,sensors = <14>;
+ interrupts = <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
#thermal-sensor-cells = <1>;
};
@@ -854,8 +855,9 @@
compatible = "qcom,msm8998-tsens", "qcom,tsens-v2";
reg = <0x10ae000 0x1000>, /* TM */
<0x10ad000 0x1000>; /* SROT */
-
#qcom,sensors = <8>;
+ interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow";
#thermal-sensor-cells = <1>;
};
--
2.17.1
