Dear Tomasz,
On Thu, 2019-09-12 at 14:58 +0900, Tomasz Figa wrote:
> On Thu, Sep 12, 2019 at 2:41 AM Frederic Chen
> <frederic.chen@xxxxxxxxxxxx> wrote:
> >
> > Hi Tomasz,
> >
> > I appreciate your helpful comments.
> >
> >
> > On Tue, 2019-09-10 at 13:04 +0900, Tomasz Figa wrote:
> > > Hi Frederic,
> > >
> > > On Tue, Sep 10, 2019 at 4:23 AM <frederic.chen@xxxxxxxxxxxx> wrote:
> > > >
> > > > From: Frederic Chen <frederic.chen@xxxxxxxxxxxx>
> > > >
> > > > This patch adds the driver of Digital Image Processing (DIP)
> > > > unit in Mediatek ISP system, providing image format
> > > > conversion, resizing, and rotation features.
> > > >
> > > > The mtk-isp directory will contain drivers for multiple IP
> > > > blocks found in Mediatek ISP system. It will include ISP
> > > > Pass 1 driver(CAM), sensor interface driver, DIP driver and
> > > > face detection driver.
> > > >
> > > > Signed-off-by: Frederic Chen <frederic.chen@xxxxxxxxxxxx>
> > > > ---
> > > > drivers/media/platform/mtk-isp/Makefile | 7 +
> > > > .../media/platform/mtk-isp/isp_50/Makefile | 7 +
> > > > .../platform/mtk-isp/isp_50/dip/Makefile | 18 +
> > > > .../platform/mtk-isp/isp_50/dip/mtk_dip-dev.c | 650 +++++
> > > > .../platform/mtk-isp/isp_50/dip/mtk_dip-dev.h | 566 +++++
> > > > .../platform/mtk-isp/isp_50/dip/mtk_dip-hw.h | 156 ++
> > > > .../platform/mtk-isp/isp_50/dip/mtk_dip-sys.c | 521 ++++
> > > > .../mtk-isp/isp_50/dip/mtk_dip-v4l2.c | 2255 +++++++++++++++++
> > > > 8 files changed, 4180 insertions(+)
> > > > create mode 100644 drivers/media/platform/mtk-isp/Makefile
> > > > create mode 100644 drivers/media/platform/mtk-isp/isp_50/Makefile
> > > > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/Makefile
> > > > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.c
> > > > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-dev.h
> > > > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-hw.h
> > > > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-sys.c
> > > > create mode 100644 drivers/media/platform/mtk-isp/isp_50/dip/mtk_dip-v4l2.c
> > > >
> > >
> > > Thanks for sending v3!
> > >
> > > I'm going to do a full review a bit later, but please check one
> > > comment about power handling below.
> > >
> > > Other than that one comment, from a quick look, I think we only have a
> > > number of style issues left. Thanks for the hard work!
> > >
> > > [snip]
> > > > +static void dip_runner_func(struct work_struct *work)
> > > > +{
> > > > + struct mtk_dip_request *req = mtk_dip_hw_mdp_work_to_req(work);
> > > > + struct mtk_dip_dev *dip_dev = req->dip_pipe->dip_dev;
> > > > + struct img_config *config_data =
> > > > + (struct img_config *)req->working_buf->config_data.vaddr;
> > > > +
> > > > + /*
> > > > + * Call MDP/GCE API to do HW excecution
> > > > + * Pass the framejob to MDP driver
> > > > + */
> > > > + pm_runtime_get_sync(dip_dev->dev);
> > > > + mdp_cmdq_sendtask(dip_dev->mdp_pdev, config_data,
> > > > + &req->img_fparam.frameparam, NULL, false,
> > > > + dip_mdp_cb_func, req);
> > > > +}
> > > [snip]
> > > > +static void dip_composer_workfunc(struct work_struct *work)
> > > > +{
> > > > + struct mtk_dip_request *req = mtk_dip_hw_fw_work_to_req(work);
> > > > + struct mtk_dip_dev *dip_dev = req->dip_pipe->dip_dev;
> > > > + struct img_ipi_param ipi_param;
> > > > + struct mtk_dip_hw_subframe *buf;
> > > > + int ret;
> > > > +
> > > > + down(&dip_dev->sem);
> > > > +
> > > > + buf = mtk_dip_hw_working_buf_alloc(req->dip_pipe->dip_dev);
> > > > + if (!buf) {
> > > > + dev_err(req->dip_pipe->dip_dev->dev,
> > > > + "%s:%s:req(%p): no free working buffer available\n",
> > > > + __func__, req->dip_pipe->desc->name, req);
> > > > + }
> > > > +
> > > > + req->working_buf = buf;
> > > > + mtk_dip_wbuf_to_ipi_img_addr(&req->img_fparam.frameparam.subfrm_data,
> > > > + &buf->buffer);
> > > > + memset(buf->buffer.vaddr, 0, DIP_SUB_FRM_SZ);
> > > > + mtk_dip_wbuf_to_ipi_img_sw_addr(&req->img_fparam.frameparam.config_data,
> > > > + &buf->config_data);
> > > > + memset(buf->config_data.vaddr, 0, DIP_COMP_SZ);
> > > > +
> > > > + if (!req->img_fparam.frameparam.tuning_data.present) {
> > > > + /*
> > > > + * When user enqueued without tuning buffer,
> > > > + * it would use driver internal buffer.
> > > > + */
> > > > + dev_dbg(dip_dev->dev,
> > > > + "%s: frame_no(%d) has no tuning_data\n",
> > > > + __func__, req->img_fparam.frameparam.frame_no);
> > > > +
> > > > + mtk_dip_wbuf_to_ipi_tuning_addr
> > > > + (&req->img_fparam.frameparam.tuning_data,
> > > > + &buf->tuning_buf);
> > > > + memset(buf->tuning_buf.vaddr, 0, DIP_TUNING_SZ);
> > > > + }
> > > > +
> > > > + mtk_dip_wbuf_to_ipi_img_sw_addr(&req->img_fparam.frameparam.self_data,
> > > > + &buf->frameparam);
> > > > + memcpy(buf->frameparam.vaddr, &req->img_fparam.frameparam,
> > > > + sizeof(req->img_fparam.frameparam));
> > > > + ipi_param.usage = IMG_IPI_FRAME;
> > > > + ipi_param.frm_param.handle = req->id;
> > > > + ipi_param.frm_param.scp_addr = (u32)buf->frameparam.scp_daddr;
> > > > +
> > > > + mutex_lock(&dip_dev->hw_op_lock);
> > > > + atomic_inc(&dip_dev->num_composing);
> > > > + ret = scp_ipi_send(dip_dev->scp_pdev, SCP_IPI_DIP, &ipi_param,
> > > > + sizeof(ipi_param), 0);
> > >
> > > We're not holding the pm_runtime enable count here
> > > (pm_runtime_get_sync() wasn't called), so rproc_shutdown() might have
> > > been called. Wouldn't that affect the ability for this IPI to run?
> > >
> > > We had a related discussion with Jerry on the FD series and I think
> > > the conclusion is:
> > > a) if there is any state that needs to be preserved between jobs, that
> > > would be cleared by rproc_shutdown() then we need to call
> > > rproc_boot/shutdown() when we start/stop streaming.
> > > b) it there is no such state, we can keep them inside runtime PM
> > > callbacks, but we need to call pm_runtime_get_sync() before sending an
> > > IPI and pm_runtime_mark_last_busy() + pm_runtime_put_autosuspend()
> > > after the SCP signals completion. In this case the runtime PM
> > > autosuspend delay should be set to around 2-3 times the delay needed
> > > for rproc_shutdown() + rproc_boot() to complete.
> >
> > Since each IMG_IPI_FRAME command is stateless, I would like to
> > use pm_runtime_get_sync()/ pm_runtime_mark_last_busy()/
> > pm_runtime_put_autosuspend() to fix this issue (solution b).
>
> What does IMG_IPI_INIT do then? Do we need it at all?
>
> I'm worried about the fact that we call rproc_boot(), IMG_IPI_INIT and
> then rproc_shutdown(). The latter can completely shutdown the SCP and
> clear any state there. How would the effects of IMG_IPI_INIT be
> preserved until IMG_IPI_FRAME is called?
>
The command IMG_IPI_INIT is to initialize the DIP hardware. Although the
DIP hardware status is not cleared when SCP is powered off, it can still
be cleared after mtk_dip_runtime_suspend() is called (it means that DIP
is going to be powered off).
I would like to re-initialize the DIP with IMG_IPI_INIT in
mtk_dip_runtime_resume() to handle this case. Is is OK?
> Best regards,
> Tomasz
Sincerely,
Frederic Chen
