On Sat, Sep 07, 2019 at 11:20:03AM +0200, Krzysztof Kozlowski wrote:
> Convert Samsung Exynos Power Management Unit (PMU) bindings to DT schema
> format using json-schema.
>
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
>
> ---
>
> Changes since v1:
> 1. Fix clock-names to match all elements against schema (any number of
> any clkoutN values).
> This currently fails:
> properties:clock-names:items: {'enum': ['clkout0', 'clkout1', 'clkout2',
> 'clkout3', 'clkout4', 'clkout5', 'clkout6', 'clkout7', 'clkout8',
> 'clkout9', 'clkout10', 'clkout11', 'clkout12', 'clkout13', 'clkout14',
> 'clkout15', 'clkout16']} is not of type 'array
>
> 2. Add syscon reboot and poweroff nodes.
> ---
> .../devicetree/bindings/arm/samsung/pmu.txt | 72 -----------
> .../devicetree/bindings/arm/samsung/pmu.yaml | 117 ++++++++++++++++++
> 2 files changed, 117 insertions(+), 72 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.txt
> create mode 100644 Documentation/devicetree/bindings/arm/samsung/pmu.yaml
>
> diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
> deleted file mode 100644
> index 433bfd7593ac..000000000000
> --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt
> +++ /dev/null
> @@ -1,72 +0,0 @@
> -SAMSUNG Exynos SoC series PMU Registers
> -
> -Properties:
> - - compatible : should contain two values. First value must be one from following list:
> - - "samsung,exynos3250-pmu" - for Exynos3250 SoC,
> - - "samsung,exynos4210-pmu" - for Exynos4210 SoC,
> - - "samsung,exynos4412-pmu" - for Exynos4412 SoC,
> - - "samsung,exynos5250-pmu" - for Exynos5250 SoC,
> - - "samsung,exynos5260-pmu" - for Exynos5260 SoC.
> - - "samsung,exynos5410-pmu" - for Exynos5410 SoC,
> - - "samsung,exynos5420-pmu" - for Exynos5420 SoC.
> - - "samsung,exynos5433-pmu" - for Exynos5433 SoC.
> - - "samsung,exynos7-pmu" - for Exynos7 SoC.
> - second value must be always "syscon".
> -
> - - reg : offset and length of the register set.
> -
> - - #clock-cells : must be <1>, since PMU requires once cell as clock specifier.
> - The single specifier cell is used as index to list of clocks
> - provided by PMU, which is currently:
> - 0 : SoC clock output (CLKOUT pin)
> -
> - - clock-names : list of clock names for particular CLKOUT mux inputs in
> - following format:
> - "clkoutN", where N is a decimal number corresponding to
> - CLKOUT mux control bits value for given input, e.g.
> - "clkout0", "clkout7", "clkout15".
> -
> - - clocks : list of phandles and specifiers to all input clocks listed in
> - clock-names property.
> -
> -Optional properties:
> -
> -Some PMUs are capable of behaving as an interrupt controller (mostly
> -to wake up a suspended PMU). In which case, they can have the
> -following properties:
> -
> -- interrupt-controller: indicate that said PMU is an interrupt controller
> -
> -- #interrupt-cells: must be identical to the that of the parent interrupt
> - controller.
> -
> -
> -Optional nodes:
> -
> -- nodes defining the restart and poweroff syscon children
> -
> -
> -Example :
> -pmu_system_controller: system-controller@10040000 {
> - compatible = "samsung,exynos5250-pmu", "syscon";
> - reg = <0x10040000 0x5000>;
> - interrupt-controller;
> - #interrupt-cells = <3>;
> - interrupt-parent = <&gic>;
> - #clock-cells = <1>;
> - clock-names = "clkout0", "clkout1", "clkout2", "clkout3",
> - "clkout4", "clkout8", "clkout9";
> - clocks = <&clock CLK_OUT_DMC>, <&clock CLK_OUT_TOP>,
> - <&clock CLK_OUT_LEFTBUS>, <&clock CLK_OUT_RIGHTBUS>,
> - <&clock CLK_OUT_CPU>, <&clock CLK_XXTI>,
> - <&clock CLK_XUSBXTI>;
> -};
> -
> -Example of clock consumer :
> -
> -usb3503: usb3503@8 {
> - /* ... */
> - clock-names = "refclk";
> - clocks = <&pmu_system_controller 0>;
> - /* ... */
> -};
> diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.yaml b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> new file mode 100644
> index 000000000000..a5a02f8237fb
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.yaml
> @@ -0,0 +1,117 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/arm/samsung/pmu.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Samsung Exynos SoC series Power Management Unit (PMU)
> +
> +maintainers:
> + - Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> +
> +properties:
> + compatible:
> + items:
> + - enum:
> + - samsung,exynos3250-pmu
> + - samsung,exynos4210-pmu
> + - samsung,exynos4412-pmu
> + - samsung,exynos5250-pmu
> + - samsung,exynos5260-pmu
> + - samsung,exynos5410-pmu
> + - samsung,exynos5420-pmu
> + - samsung,exynos5433-pmu
> + - samsung,exynos7-pmu
> + - const: syscon
> +
> + reg:
> + maxItems: 1
> +
> + '#clock-cells':
> + const: 1
> +
> + clock-names:
> + description:
> + List of clock names for particular CLKOUT mux inputs
> + minItems: 1
> + maxItems: 32
> + items:
> + enum:
> + - clkout0
> + - clkout1
Looking at this again, instead of enum, we can just do:
pattern: '^clkout([0-9]|[12][0-9]|3[0-1])$'
> + - clkout2
> + - clkout3
> + - clkout4
> + - clkout5
> + - clkout6
> + - clkout7
> + - clkout8
> + - clkout9
> + - clkout10
> + - clkout11
> + - clkout12
> + - clkout13
> + - clkout14
> + - clkout15
> + - clkout16
> + - clkout17
> + - clkout18
> + - clkout19
> + - clkout20
> + - clkout21
> + - clkout22
> + - clkout23
> + - clkout24
> + - clkout25
> + - clkout26
> + - clkout27
> + - clkout28
> + - clkout29
> + - clkout30
> + - clkout31
