Re: [PATCH 6/6] ARM: dts: Configure rstctrl reset for SGX

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

* H. Nikolaus Schaller <hns@xxxxxxxxxxxxx> [190913 09:50]:
> Hi Tony,
> 
> > Am 14.08.2019 um 15:14 schrieb Tony Lindgren <tony@xxxxxxxxxxx>:
> > 
> > The following can be tested via sysfs with the following to ensure the SGX
> > module gets enabled and disabled properly:
> > 
> > # echo on > /sys/bus/platform/devices/5600fe00.target-module/power/control
> > # rwmem 0x5600fe00		# revision register
> > 0x5600fe00 = 0x40000000
> > # echo auto > /sys/bus/platform/devices/5600fe00.target-module/power/control
> > # rwmem 0x5000fe00
> > Bus error
> > 
> > Note that this patch depends on the PRM rstctrl driver that has
> > been recently posted.
> 
> Do you have a list of these patches or a git for pulling the complete set
> of changes? Does it depend on mainline or linux-next?

You need the drivers/bus/ti-sysc.c changes from Linux next,
and the most recent clkctrl and rstctrl patches posted by
Tero.

> I tried to find the correct patches but it does not seem to work for
> me on beaglebone.

OK can you please check the dependencies again and let me know
if you still have issues?

Regards,

Tony



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux