This patch adds more clocks from FSYS and FSYS2 blocks
and uses GATE_IP_* registers for gating IPs.
Signed-off-by: Shaik Ameer Basha <shaik.ameer@xxxxxxxxxxx>
---
drivers/clk/samsung/clk-exynos5420.c | 37 +++++++++++++++++++++++-----------
1 file changed, 25 insertions(+), 12 deletions(-)
diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
index d9996dd..d8fe6d8 100755
--- a/drivers/clk/samsung/clk-exynos5420.c
+++ b/drivers/clk/samsung/clk-exynos5420.c
@@ -85,6 +85,7 @@
#define GATE_BUS_TOP 0x10700
#define GATE_BUS_GEN 0x1073c
#define GATE_BUS_FSYS0 0x10740
+#define GATE_BUS_FSYS2 0x10748
#define GATE_BUS_PERIC 0x10750
#define GATE_BUS_PERIC1 0x10754
#define GATE_BUS_PERIS0 0x10760
@@ -97,6 +98,7 @@
#define GATE_IP_DISP1 0x10928
#define GATE_IP_G3D 0x10930
#define GATE_IP_GEN 0x10934
+#define GATE_IP_FSYS 0x10944
#define GATE_IP_PERIC 0x10950
#define GATE_IP_PERIS 0x10960
#define GATE_IP_MSCL 0x10970
@@ -177,6 +179,7 @@ static unsigned long exynos5420_clk_regs[] __initdata = {
GATE_BUS_TOP,
GATE_BUS_GEN,
GATE_BUS_FSYS0,
+ GATE_BUS_FSYS2,
GATE_BUS_PERIC,
GATE_BUS_PERIC1,
GATE_BUS_PERIS0,
@@ -189,6 +192,7 @@ static unsigned long exynos5420_clk_regs[] __initdata = {
GATE_IP_DISP1,
GATE_IP_G3D,
GATE_IP_GEN,
+ GATE_IP_FSYS,
GATE_IP_PERIC,
GATE_IP_PERIS,
GATE_IP_MSCL,
@@ -269,6 +273,8 @@ PNAME(mout_sw_aclk66_p) = {"dout_aclk66", "mout_sclk_spll"};
PNAME(mout_user_aclk66_peric_p) = {"fin_pll", "mout_sw_aclk66"};
PNAME(mout_sw_aclk200_fsys_p) = {"dout_aclk200_fsys", "mout_sclk_spll"};
+PNAME(mout_sw_pclk200_fsys_p) = {"dout_pclk200_fsys", "mout_sclk_spll"};
+PNAME(mout_user_pclk200_fsys_p) = {"fin_pll", "mout_sw_pclk200_fsys"};
PNAME(mout_user_aclk200_fsys_p) = {"fin_pll", "mout_sw_aclk200_fsys"};
PNAME(mout_sw_aclk200_fsys2_p) = {"dout_aclk200_fsys2", "mout_sclk_spll"};
@@ -481,6 +487,7 @@ static struct samsung_mux_clock exynos5420_mux_clks[] __initdata = {
MUX(0, "mout_mmc2", mout_group2_p, SRC_FSYS, 16, 3),
MUX(0, "mout_usbd300", mout_group2_p, SRC_FSYS, 20, 3),
MUX(0, "mout_unipro", mout_group2_p, SRC_FSYS, 24, 3),
+ MUX(0, "mout_mphy_refclk", mout_group2_p, SRC_FSYS, 28, 3),
/* PERIC Block */
MUX(0, "mout_uart0", mout_group2_p, SRC_PERIC0, 4, 3),
@@ -495,6 +502,11 @@ static struct samsung_mux_clock exynos5420_mux_clks[] __initdata = {
MUX(0, "mout_spi0", mout_group2_p, SRC_PERIC1, 20, 3),
MUX(0, "mout_spi1", mout_group2_p, SRC_PERIC1, 24, 3),
MUX(0, "mout_spi2", mout_group2_p, SRC_PERIC1, 28, 3),
+ MUX(0, "mout_pclk200_fsys", mout_group1_p, SRC_TOP0, 24, 2),
+ MUX(0, "mout_sw_pclk200_fsys", mout_sw_pclk200_fsys_p,
+ SRC_TOP10, 24, 1),
+ MUX(0, "mout_user_pclk200_fsys", mout_user_pclk200_fsys_p,
+ SRC_TOP3, 24, 1),
MUX(0, "mout_aclk100_noc", mout_group1_p, SRC_TOP0, 20, 2),
MUX(0, "mout_sw_aclk100_noc", mout_sw_aclk100_noc_p,
SRC_TOP10, 20, 1),
@@ -594,6 +606,7 @@ static struct samsung_div_clock exynos5420_div_clks[] __initdata = {
DIV(0, "dout_mmc2", "mout_mmc2", DIV_FSYS1, 20, 10),
DIV(0, "dout_unipro", "mout_unipro", DIV_FSYS2, 24, 8),
+ DIV(0, "dout_mphy_refclk", "mout_mphy_refclk", DIV_FSYS2, 16, 8),
/* UART and PWM */
DIV(0, "dout_uart0", "mout_uart0", DIV_PERIC0, 8, 4),
@@ -720,12 +733,12 @@ static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = {
GATE(CLK_SCLK_USBPHY300, "sclk_usbphy300", "dout_usbphy300",
GATE_TOP_SCLK_FSYS, 8, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_USBD300, "sclk_usbd300", "dout_usbd300",
- GATE_TOP_SCLK_FSYS, 9, CLK_SET_RATE_PARENT, 0),
+ GATE_TOP_SCLK_FSYS, 9, CLK_IGNORE_UNUSED, 0),
GATE(CLK_SCLK_USBD301, "sclk_usbd301", "dout_usbd301",
- GATE_TOP_SCLK_FSYS, 10, CLK_SET_RATE_PARENT, 0),
+ GATE_TOP_SCLK_FSYS, 10, CLK_IGNORE_UNUSED, 0),
- GATE(CLK_SCLK_USBD301, "sclk_unipro", "dout_unipro",
- SRC_MASK_FSYS, 24, CLK_SET_RATE_PARENT, 0),
+ GATE(CLK_SCLK_UNIPRO, "sclk_unipro", "dout_unipro",
+ GATE_IP_FSYS, 23, CLK_SET_RATE_PARENT, 0),
GATE(CLK_SCLK_GSCL_WA, "sclk_gscl_wa", "mout_user_aclk333_432_gscl",
GATE_TOP_SCLK_GSCL, 6, CLK_SET_RATE_PARENT, 0),
@@ -754,15 +767,15 @@ static struct samsung_gate_clock exynos5420_gate_clks[] __initdata = {
GATE(CLK_PDMA0, "pdma0", "aclk200_fsys", GATE_BUS_FSYS0, 1, 0, 0),
GATE(CLK_PDMA1, "pdma1", "aclk200_fsys", GATE_BUS_FSYS0, 2, 0, 0),
GATE(CLK_UFS, "ufs", "aclk200_fsys2", GATE_BUS_FSYS0, 3, 0, 0),
- GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_BUS_FSYS0, 5, 0, 0),
- GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_BUS_FSYS0, 12, 0, 0),
- GATE(CLK_MMC1, "mmc1", "aclk200_fsys2", GATE_BUS_FSYS0, 13, 0, 0),
- GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_BUS_FSYS0, 14, 0, 0),
+ GATE(CLK_RTIC, "rtic", "aclk200_fsys", GATE_IP_FSYS, 9, 0, 0),
+ GATE(CLK_MMC0, "mmc0", "aclk200_fsys2", GATE_IP_FSYS, 12, 0, 0),
+ GATE(CLK_MMC1, "mmc1", "aclk200_fsys2", GATE_IP_FSYS, 13, 0, 0),
+ GATE(CLK_MMC2, "mmc2", "aclk200_fsys2", GATE_IP_FSYS, 14, 0, 0),
GATE(CLK_SROMC, "sromc", "aclk200_fsys2",
- GATE_BUS_FSYS0, 19, CLK_IGNORE_UNUSED, 0),
- GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_BUS_FSYS0, 20, 0, 0),
- GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_BUS_FSYS0, 21, 0, 0),
- GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_BUS_FSYS0, 28, 0, 0),
+ GATE_IP_FSYS, 17, CLK_IGNORE_UNUSED, 0),
+ GATE(CLK_USBH20, "usbh20", "aclk200_fsys", GATE_IP_FSYS, 18, 0, 0),
+ GATE(CLK_USBD300, "usbd300", "aclk200_fsys", GATE_IP_FSYS, 19, 0, 0),
+ GATE(CLK_USBD301, "usbd301", "aclk200_fsys", GATE_IP_FSYS, 20, 0, 0),
/* UART */
GATE(CLK_UART0, "uart0", "aclk66_peric", GATE_IP_PERIC, 0, 0, 0),
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
