On Mon, Sep 16, 2019 at 10:35:26AM +0300, Alexandru Ardelean wrote:
> This driver becomes the first user of the kernel's `ETHTOOL_PHY_EDPD`
> phy-tunable feature.
> EDPD is also enabled by default on PHY config_init, but can be disabled via
> the phy-tunable control.
>
> When enabling EDPD, it's also a good idea (for the ADIN PHYs) to enable TX
> periodic pulses, so that in case the other PHY is also on EDPD mode, there
> is no lock-up situation where both sides are waiting for the other to
> transmit.
>
> Via the phy-tunable control, TX pulses can be disabled if specifying 0
> `tx-interval` via ethtool.
>
> The ADIN PHY supports only fixed 1 second intervals; they cannot be
> configured. That is why the acceptable values are 1,
> ETHTOOL_PHY_EDPD_DFLT_TX_MSECS and ETHTOOL_PHY_EDPD_NO_TX (which disables
> TX pulses).
>
> Reviewed-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
> Signed-off-by: Alexandru Ardelean <alexandru.ardelean@xxxxxxxxxx>
Reviewed-by: Andrew Lunn <andrew@xxxxxxx>
Andrew
