Re: [RFC PATCH V4 4/4] dts: arm64: mt8183: Add sensor interface nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 2019-09-15 at 14:50 +0800, Louis Kuo wrote:
> Add nodes for Mediatek's sensor interface device. Sensor interface module
> embedded in Mediatek SOCs, works as a HW camera interface controller
> intended for image and data transmission between cameras and host devices.
> 
> Signed-off-by: Louis Kuo <louis.kuo@xxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/mediatek/mt8183.dtsi | 14 ++++++++++++++
>  1 file changed, 14 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> index 66aaa07f6cec..f1d081b99867 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
> @@ -506,4 +506,18 @@
>  			#clock-cells = <1>;
>  		};
>  	};
> +
> +	seninf: seninf@1a040000 {
> +		compatible = "mediatek,mt8183-seninf";
> +		reg = <0 0x1a040000 0 0x8000>,
> +		      <0 0x11C80000 0 0x6000>;

Please use lower case for hex value.


> +		reg-names = "base_reg", "rx_reg";
> +		interrupts = <GIC_SPI 251 IRQ_TYPE_LEVEL_LOW>;
> +		power-domains = <&scpsys MT8183_POWER_DOMAIN_CAM>;
> +		clocks = <&camsys CLK_CAM_SENINF>,
> +			 <&topckgen CLK_TOP_MUX_SENINF>;
> +		clock-names = "CLK_CAM_SENINF", "CLK_TOP_MUX_SENINF";
> +		status = "disabled";
> +		};
> +	};


extra } ?

Joe.C





[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux