Re: [PATCH 1/4] MMC: Ingenic: Adjust the macro definition name.

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Zhou,

Thanks for your interest in this driver, I'm glad
so see it's more used.

On Thu, 2019-09-05 at 15:38 +0800, Zhou Yanjie wrote:
> Adjust the macro definition name to match the corresponding
> register name in the datasheet.
> 

It's not really an issue to have slighlt different
names on the macros. They are currently sufficiently
descriptive, and I don't think it's deserves a patch.

Thanks,
Ezequiel

> Signed-off-by: Zhou Yanjie <zhouyanjie@xxxxxxxx>
> ---
>  drivers/mmc/host/jz4740_mmc.c | 18 +++++++++---------
>  1 file changed, 9 insertions(+), 9 deletions(-)
> 
> diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c
> index ffdbfaa..1b1fcb7 100644
> --- a/drivers/mmc/host/jz4740_mmc.c
> +++ b/drivers/mmc/host/jz4740_mmc.c
> @@ -28,7 +28,7 @@
>  #include <asm/mach-jz4740/dma.h>
>  
>  #define JZ_REG_MMC_STRPCL	0x00
> -#define JZ_REG_MMC_STATUS	0x04
> +#define JZ_REG_MMC_STAT		0x04
>  #define JZ_REG_MMC_CLKRT	0x08
>  #define JZ_REG_MMC_CMDAT	0x0C
>  #define JZ_REG_MMC_RESTO	0x10
> @@ -40,7 +40,7 @@
>  #define JZ_REG_MMC_IREG		0x28
>  #define JZ_REG_MMC_CMD		0x2C
>  #define JZ_REG_MMC_ARG		0x30
> -#define JZ_REG_MMC_RESP_FIFO	0x34
> +#define JZ_REG_MMC_RES		0x34
>  #define JZ_REG_MMC_RXFIFO	0x38
>  #define JZ_REG_MMC_TXFIFO	0x3C
>  #define JZ_REG_MMC_DMAC		0x44
> @@ -391,7 +391,7 @@ static void jz4740_mmc_clock_disable(struct jz4740_mmc_host *host)
>  
>  	writew(JZ_MMC_STRPCL_CLOCK_STOP, host->base + JZ_REG_MMC_STRPCL);
>  	do {
> -		status = readl(host->base + JZ_REG_MMC_STATUS);
> +		status = readl(host->base + JZ_REG_MMC_STAT);
>  	} while (status & JZ_MMC_STATUS_CLK_EN && --timeout);
>  }
>  
> @@ -403,7 +403,7 @@ static void jz4740_mmc_reset(struct jz4740_mmc_host *host)
>  	writew(JZ_MMC_STRPCL_RESET, host->base + JZ_REG_MMC_STRPCL);
>  	udelay(10);
>  	do {
> -		status = readl(host->base + JZ_REG_MMC_STATUS);
> +		status = readl(host->base + JZ_REG_MMC_STAT);
>  	} while (status & JZ_MMC_STATUS_IS_RESETTING && --timeout);
>  }
>  
> @@ -446,7 +446,7 @@ static void jz4740_mmc_transfer_check_state(struct jz4740_mmc_host *host,
>  {
>  	int status;
>  
> -	status = readl(host->base + JZ_REG_MMC_STATUS);
> +	status = readl(host->base + JZ_REG_MMC_STAT);
>  	if (status & JZ_MMC_STATUS_WRITE_ERROR_MASK) {
>  		if (status & (JZ_MMC_STATUS_TIMEOUT_WRITE)) {
>  			host->req->cmd->error = -ETIMEDOUT;
> @@ -580,10 +580,10 @@ static bool jz4740_mmc_read_data(struct jz4740_mmc_host *host,
>  	/* For whatever reason there is sometime one word more in the fifo then
>  	 * requested */
>  	timeout = 1000;
> -	status = readl(host->base + JZ_REG_MMC_STATUS);
> +	status = readl(host->base + JZ_REG_MMC_STAT);
>  	while (!(status & JZ_MMC_STATUS_DATA_FIFO_EMPTY) && --timeout) {
>  		d = readl(fifo_addr);
> -		status = readl(host->base + JZ_REG_MMC_STATUS);
> +		status = readl(host->base + JZ_REG_MMC_STAT);
>  	}
>  
>  	return false;
> @@ -614,7 +614,7 @@ static void jz4740_mmc_read_response(struct jz4740_mmc_host *host,
>  {
>  	int i;
>  	uint16_t tmp;
> -	void __iomem *fifo_addr = host->base + JZ_REG_MMC_RESP_FIFO;
> +	void __iomem *fifo_addr = host->base + JZ_REG_MMC_RES;
>  
>  	if (cmd->flags & MMC_RSP_136) {
>  		tmp = readw(fifo_addr);
> @@ -797,7 +797,7 @@ static irqreturn_t jz_mmc_irq(int irq, void *devid)
>  	struct mmc_command *cmd = host->cmd;
>  	uint32_t irq_reg, status, tmp;
>  
> -	status = readl(host->base + JZ_REG_MMC_STATUS);
> +	status = readl(host->base + JZ_REG_MMC_STAT);
>  	irq_reg = jz4740_mmc_read_irq_reg(host);
>  
>  	tmp = irq_reg;






[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux