On Thu, 12 Sep 2019 06:39:50 -0500
Dan Murphy <dmurphy@xxxxxx> wrote:
> Andreas
>
> On 9/11/19 12:21 PM, Andreas Kemnade wrote:
> > add enable-gpios to describe HWEN pin
> >
> > Signed-off-by: Andreas Kemnade <andreas@xxxxxxxxxxxx>
> > Acked-by: Daniel Thompson <daniel.thompson@xxxxxxxxxx>
> > ---
> > changes in v2: added example
> > changes in v3: added Acked-by
> > .../bindings/leds/backlight/lm3630a-backlight.yaml | 5 +++++
> > 1 file changed, 5 insertions(+)
> >
> > diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> > index dc129d9a329e..1fa83feffe16 100644
> > --- a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> > +++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
> > @@ -29,6 +29,10 @@ properties:
> > '#size-cells':
> > const: 0
> >
> > + enable-gpios:
> > + description: GPIO to use to enable/disable the backlight (HWEN pin).
> > + maxItems: 1
> > +
> > required:
> > - compatible
> > - reg
> > @@ -92,6 +96,7 @@ examples:
> > i2c {
> > #address-cells = <1>;
> > #size-cells = <0>;
> > + enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
> >
> > led-controller@38 {
> > compatible = "ti,lm3630a";
>
> Looks good to me
>
well, the enable-gpios is still at the same place as in v2. This was sent
before your comments to v2 have been arrived.
Regards,
Andreas
Attachment:
pgpUhYOUN9S_r.pgp
Description: OpenPGP digital signature
